Static route configuration for dedicated channels

Operation scenarios

If the routing mode of the dedicated channel is "Static Route", these rules are used to connect the network between the on-premises IDC and the dedicated channel.

Operation steps

1. Sign in to the Dedicated Channel Console.
2. Click the "Add Dedicated Channel" button.
3. Use the table below as a guide to configure the dedicated channel.

Note: Routes for both directions must be configured; neither can be omitted.VPC segment: 192.168.22.0/24 IDC (or other cloud segments): 10.100.0.0/24

Parameters	Description	Sample values
Network type	Select the network type of the static route entry. The default network type is IPv4. If the IPv6 function of the dedicated gateway is enabled, you can create static route entries of the IPv6 type.	IPv4
Destination segment	Enter the destination segment of the Baidu AI Cloud VPC. The next hop type is dedicated gateway (the dedicated gateway must be created in advance). If the destination segment is the user’s IDC side or other cloud segments, the next hop type is dedicated channel.
Next hop type	For the next hop instance type of the route entry, select "Dedicated Gateway". For the next hop instance type of the route entry, select "Dedicated Channel", representing the on-premises direction.	Dedicated gateway, dedicated channel
Next hop	*For the dedicated gateway bound to the current dedicated channel, select the dedicated gateway ID. *Select the dedicated channel ID.	dcphy-kyz3bd9xi2pw dedicatedconn-yuwv3mw3jd19

4. Click OK to complete the addition of the route entry.

Related documents

Create routing rules of dedicated channel