How to Evaluate Large Language Models on Complex Mathematical Proof Tasks

    This article presents a practical guide for using complex mathematical proof tasks to assess the capabilities of large language models (LLMs). It explains why open-ended proofs are a strong evaluation entry point, then walks through the core evaluation dimensions—logical rigor, open-problem handling, long-text organization, writing quality, long-task stability under rate limits, and cost transparency. It also covers how to build reproducible task sets, how to control the process for long proofs, how to verify results beyond surface plausibility, how to account for cost and quota constraints, how to compare models fairly, and how to operationalize the workflow in the cloud. Readers will come away with an engineering-oriented framework for producing reliable, repeatable evaluations instead of relying on one-off impressions.

    1. Why Open Mathematical Proofs Are a Strong Entry Point for LLM Evaluation

    Complex mathematical proof tasks make good evaluation entry points because they clearly separate “linguistic fluency” from “genuine reasoning ability.” Ordinary question answering can be completed through retrieval, template restatement, or common-sense completion. Open mathematical proofs usually have no ready-made answer: the model must choose a proof strategy on its own, organize lemmas, control the scope of assumptions, and finally produce text that can be checked and reproduced. These tasks typically share the following characteristics:

    1. The answer cannot be directly searched and reused
    When a proposition has no existing proof, or the source material states only the proposition without deriving it, the model must rely on reasoning rather than memory. Output quality in this case better reflects its true capability.

    2. Long reasoning chains expose weaknesses more easily
    A proof requires many consecutive reasoning steps. Any single point of conceptual confusion, missing condition, or circular reasoning can invalidate the final conclusion. This makes such tasks well suited for testing stability across multi-step work.

    3. High demands on output structure
    A competent proof must not only “think clearly” but also “write clearly.” The model needs to restate the proposition, define notation, split out lemmas, expand the proof, converge on a conclusion, and run a self-check. This is a real challenge for long-text organization.

    4. Results can be verified manually or semi-automatically
    Compared with open-ended writing, the key steps of a proof can often be checked section by section. Even when full automation is not possible, quality can be judged through peer-review-style checklists, counterexample hunting, and rechecking of critical lemmas.

    Building an evaluation system around “complex mathematical proof tasks” is therefore more concrete than simply asking “is the model smart,” and it lends itself more easily to engineering metrics.

    2. Core Dimensions for Evaluating an LLM’s Proof Capabilities

    To avoid mistaking “beautiful language” for “correct logic,” it helps to build a layered evaluation model across the following dimensions.

    1. Rigor of logical reasoning
    This is the top priority. Watch closely for whether the model clearly uses the conditions given in the problem, avoids introducing unproven premises, provides sufficient justification at key steps, and stays free of skipped steps, circular reasoning, or faulty citations. A practical method is to extract several key conclusions from the proof and interrogate each one: “Which premise is this conclusion derived from?”, “Are there exceptions?”, “Are boundary conditions omitted?”

    2. Ability to handle open problems
    Open mathematical problems usually mean there is no standard template. The model must first identify the problem type and then choose a suitable strategy—direct construction, proof by contradiction, induction, case analysis, or extremal analysis. Evaluation should focus on whether it can propose a reasonable path rather than mechanically applying common problem patterns.

    3. Long-text organization ability
    Long proofs often need to be developed across chapters, sections, and lemmas. Strong output should have clear hierarchy: restate the proposition, give the overall approach, split out auxiliary results, and then complete the main proof. If the model shows inconsistent notation, repeated arguments, or broken sections over long output, its control of long tasks is insufficient.

    4. Writing and expression quality
    A proof is not judged by a correct conclusion alone; it also needs accurate terminology, natural phrasing, and clear logical connections. If the task asks for English technical lecture material, pay attention to whether it maintains an academic tone, uses consistent notation, and improves readability without sacrificing rigor.

    5. Long-task stability and rate-limit constraints
    Complex proofs are rarely finished in a single call. The model may need to maintain state over a long context or emit several sections in batches. Here, short-window limits, long-window quota limits, output length caps, and failed retries all affect the completion rate. Evaluation must therefore include “engineering usability,” not just the quality of a single generation.

    6. Cost transparency
    Tasks consume very differently. A simple polish may need only a few tokens, while a full proof can involve a large amount of drafting, revision, checking, and regeneration. Evaluation should distinguish between the “cost of a single call,” the “total cost of completing a task,” and the “cost of reaching deliverable quality,” rather than looking only at the surface unit price.

    3. Building a Reproducible Evaluation Task Set

    For evaluation conclusions to be reliable, the first step is to build a stable task set rather than depend on scattered personal experience.

    1. Selection principles
    Prefer propositions of the following kinds:

    • The source material provides no complete proof;
    • The proposition is stated clearly, but the proof path is not unique;
    • It involves multiple lemmas or requires case analysis;
    • It can form a complete logical loop within a limited length;
    • It does not depend on highly obscure proprietary definitions, unless the evaluation targets a specific domain.

    At the same time, avoid using classic results that appear frequently in the model’s training data; otherwise it is impossible to separate “reasoning ability” from “memory ability.” You can rewrite the original proposition, change conditions or parameters, or adjust the phrasing to raise task novelty.

    2. Fixed prompt structure
    To reduce randomness, use a structured prompt. An example:

    1. Role: A rigorous mathematical proof writing assistant
    2. Task: Prove the given proposition and output a complete text suitable for technical lecture material
    3. Constraints:
    4. 1. Use only the premises and definitions allowed by the problem;
    5. 2. State the basis for every step of the derivation;
    6. 3. If a lemma is needed, prove the lemma first;
    7. 4. Do not skip key steps;
    8. 5. Output a self-check list at the end.
    9. Output format:
    10. 1. Restatement of the proposition
    11. 2. Proof strategy
    12. 3. Preliminary definitions and notation
    13. 4. Lemmas and their proofs
    14. 5. Main proof
    15. 6. Conclusion and boundary notes
    16. 7. Self-check list

    The value of this prompt is that it makes “implicit requirements” explicit. The model no longer just “writes something that looks like a proof”; it delivers according to a checkable structure.

    3. Multiple samples and fixed parameters
    A single generation is easily affected by chance. Sample the same task multiple times and keep the generation parameters as fixed as possible. When evaluating, look not only at the best output but also at average performance and failure patterns. If a model can occasionally produce an excellent proof but shows severe step-skipping most of the time, it should not be rated too highly on the strength of one success.

    4. Process Control Methods for Long Proof Tasks

    Faced with complex propositions, asking the model to output a complete proof in one shot is often inefficient. A more reliable approach is to split the task into multiple stages.

    1. Generate a proof outline first
    Start by asking the model to output only the proof route, for example:

    • Whether to use proof by contradiction;
    • Whether an auxiliary object must be constructed first;
    • Whether several lemmas need to be proven;
    • What the main risk points are.

    Although this stage’s output cannot replace the final proof, it exposes whether the model’s understanding of the problem is correct. If the outline clearly goes off track, subsequent long-form generation will usually amplify the error.

    2. Expand lemmas one by one
    For proofs that depend on multiple auxiliary results, generate each lemma as a separate subtask. This reduces context pressure and makes section-by-section verification easier. Once finished, stitch the sections together into the main proof.

    3. Maintain progress with a state table
    In long tasks, maintain a simple state table that records the completed and pending parts. For example:

    1. Proposition: to be proven
    2. Confirmed conditions: Condition A, Condition B
    3. Proven lemmas: Lemma 1
    4. Unfinished parts: case analysis in the main proposition
    5. Risk points: whether a certain step depends on an extra assumption
    6. Next step: complete the proof of Lemma 1 and check boundary cases

    This state table can serve as a context summary for the next prompt, helping the model avoid contradictions.

    4. Output a self-check list
    After the final proof, ask the model to give self-check results, including:

    • Whether all given conditions were used;
    • Whether any unproven assumption was introduced;
    • Whether there is any notation conflict;
    • Whether extreme cases were handled;
    • Whether the conclusion matches the proposition exactly.

    A self-check list cannot guarantee absolute correctness, but it improves the reviewability of the output and makes later human review easier.

    5. Result Verification: From “Looks Right” to “Can Be Checked”

    The key to evaluating proofs is not to chase a mystical score, but to establish a repeatable quality-control process.

    1. Verify by breaking down key steps
    Split the proof into several independent judgment points and check each one. For example:

    • Are the definitions clear?
    • Was the lemma actually proven?
    • Is every step derived from the previous one?
    • Is the case analysis complete?
    • Does the final conclusion cover all cases of the original proposition?

    2. Boundary case testing
    Many errors do not appear in the main derivation but in extreme conditions, special values, or degenerate cases. During evaluation, actively ask the model to address boundary cases and check whether any were omitted.

    3. Proof by contradiction and alternative paths
    If one proof path is too roundabout, ask the model to try another approach, such as a constructive proof, an inductive proof, or proof by contradiction. If different paths reach the same conclusion, credibility is higher; if they contradict each other, at least one piece of reasoning needs review.

    4. Formal verification approach
    When engineering conditions allow, convert key proof fragments into a formal verification environment for checking. Even without full formalization, this approach can raise rigor by mapping a natural-language proof to explicit propositions, definitions, rules, and derivation steps, reducing vague expression.

    6. Cost, Quotas, and Rate Limits: Engineering Factors Not to Ignore

    Many evaluations focus only on “how well the model writes” and overlook “whether it can finish stably.” In practice, long tasks are often constrained by quotas, rates, and task-window limits. A complex proof submitted overnight may repeatedly hit limits between short-window and long-window quotas, affecting final delivery.

    1. Breaking down the cost structure
    Split cost into four categories:

    • Input cost: the problem, historical context, state summaries;
    • Output cost: the proof body, drafts, rewritten content;
    • Retry cost: repeated generation caused by formatting errors, logic errors, or truncation;
    • Verification cost: manual review, automated checks, and multi-round follow-up.

    2. Budget estimation method
    Use a simplified formula:

    1. Total cost ≈ per-round input usage × number of rounds + per-round output usage × number of rounds
    2. + retry count × average per-round cost
    3. + verification and cleanup cost

    Complex mathematical proofs often require multiple rounds, so the price of a single request is not enough. If a task needs an outline, section-by-section generation, iterative revision, and final integration, the total consumption can be several times that of a single call.

    3. Segmentation strategies for coping with rate limits
    To avoid mid-task interruption, split long tasks into resumable units. For example:

    • Generate only one section at a time;
    • Save results after each lemma is completed;
    • Use summaries to maintain context rather than endlessly concatenating history;
    • Record failed tasks in a retry queue and process them in batches;
    • Set a priority queue for high-value tasks and defer low-risk polishing tasks.

    7. Methods for Comparing Different Models

    When comparing different models or service tiers, avoid drawing conclusions from a single case. A more reasonable approach uses a unified task set, a unified prompt, and a unified scoring standard.

    1. Build a scoring table
    Refer to the following dimensions:

    Dimension Suggested weight Observation metric
    Reasoning correctness 40% Whether key steps are verifiable
    Expression quality 20% Structure, terminology, readability
    Long-task completion rate 15% Whether output is complete and on topic
    Stability 10% Whether repeated runs are consistent
    Cost efficiency 15% Total consumption to reach acceptable quality

    2. Blind review and multi-person review
    De-identify the generated results and have multiple people score them independently. The focus is not on comparing style preferences, but on judging the number of logical gaps, proof completeness, and the cost of modification.

    3. Distinguish “ceiling capability” from “average capability”
    Some models occasionally produce high-quality proofs but fail often; others are stable but lack originality. Evaluation conclusions should separately state:

    • What the best sample can do;
    • What most samples can do;
    • Whether delivery is possible under time and budget constraints.

    4. Watch the relationship between reasoning-chain length and accuracy
    A longer derivation does not necessarily mean stronger capability. An overly long chain may add redundancy, repetition, and context pollution; an overly short one may omit key steps. Evaluation should focus on “effective reasoning density”—whether each step advances the final proof—rather than merely counting length.

    8. Engineering Implementation: Building an Evaluation and Scheduling System in the Cloud

    To scale up this kind of evaluation task, fold it into an engineering pipeline. Taking Baidu AI Cloud as an example, you can build a runnable system by combining general cloud product categories: use a container platform to host evaluation tasks and model-calling services, use object storage to save task sets, prompts, output results, and version snapshots, use a message queue to decouple long-running tasks, use a logging service to record call chains and error causes, and use monitoring and alerting to track quota consumption, task failure rate, and response latency.

    Such an engineering structure brings several benefits:

    1. Reproducibility
    All inputs, outputs, and parameters can be versioned and saved, making it easy to trace why a given evaluation produced a given result.

    2. Resumability
    Once long tasks are split, even if rate limits or interruptions occur, work can continue from a checkpoint rather than rerun from the start.

    3. Auditability
    Logs and monitoring help identify whether the cause is insufficient model capability, a prompt design problem, or poor quota planning.

    4. Scalability
    As the task set grows, queue scheduling and task-priority management can balance high-value proof tasks against ordinary question-answering tasks.

    9. Common Pitfalls and Improvement Suggestions

    1. Mistaking fluency for logical correctness
    In proofs, elegant expression does not equal valid reasoning. You must return to assumptions, definitions, and the derivation chain to check.

    2. Mistaking memory restatement for open reasoning
    If a problem is highly common in the training corpus, the model may simply restate existing content. Introduce rewritten problems, variant problems, and unseen propositions during evaluation.

    3. Ignoring the impact of quotas and rate limits on results
    If tasks are frequently interrupted by insufficient quota, you cannot judge model capability from failed samples alone; instead, distinguish “capability problems” from “resource problems.”

    4. Over-pursuing long reasoning chains
    Complex tasks need sufficient reasoning, but longer is not always better. Focus on whether each step advances the conclusion and whether there is redundant repetition.

    5. Lacking unified acceptance standards
    Without a fixed scoring table and review mechanism, discussions easily descend into personal-preference arguments. Engineering-oriented evaluation should minimize subjective arbitrariness.

    10. Conclusion

    Complex mathematical proof tasks are a highly valuable testing ground for LLM capability evaluation. They test not only whether a model can generate fluent text, but whether it can complete multi-step reasoning, structured expression, and long-task maintenance without a ready-made answer. To reach reliable conclusions, you cannot rely on a single use experience; you must build a complete evaluation system covering reasoning rigor, expression quality, stability, cost efficiency, and reproducibility.

    In practice, start by building a small but high-quality task set, then use fixed prompts and multiple samples to observe average performance. At the same time, split long proofs into four stages—outline, lemmas, body, and self-check—supported by state summaries and segmented output. This both improves the task completion rate and more accurately identifies a model’s strengths and weaknesses. For enterprise users and R&D teams, only by combining model capability, engineering workflow, and cost boundaries can you form a large-model application solution that is truly deployable, replicable, and sustainably improvable.