Post-Training Scaling vs. New Foundation Models: Two Paths to Advancing LLMs
As open-source LLM competition heats up, two distinct strategies have emerged for pushing model capabilities higher: post-training scaling on top of an existing base model, and building a brand-new trillion-parameter foundation model from scratch. This article breaks down how each path actually works—its mechanics, cost, iteration speed, and capability ceiling—and then offers practical guidance on evaluation and model selection, including why coding and agent tasks have become the main testing ground, how to read public benchmarks, the real meaning and limits of million-token context windows, and why scenario fit matters more than leaderboard rankings.
Introduction: Two Forks in the Road
Over the past two years, the open-source LLM race has essentially been a contest of methodologies—each competing on how to push the upper bound of intelligence higher. As leading models approach a certain stage-wise ceiling, the field has naturally split into two distinct technical paths:
- One chooses not to touch the foundation and instead squeezes the existing base for all it’s worth, driving capabilities to their limit through post-training.
- The other chooses to start over and build higher, reconstructing the capability ceiling from zero with a much larger, all-new base model.
Neither path is simply “more advanced” or “more backward.” Each represents a different trade-off among compute, time, risk, and reward. For developers and organizations making technical choices, understanding the essential difference between these two paths is far more valuable than memorizing any single model’s benchmark score. Starting from technical principles, this article unpacks how each path works, along with its costs and boundaries, and closes with practical evaluation and selection approaches.
Path One: Post-Training Scaling Without a New Base
What Post-Training Actually Does
To appreciate the value of this path, it helps to first clarify how LLM training is layered.
In the pre-training stage, the model performs next-token prediction over massive corpora. This essentially compresses and memorizes world knowledge, and it sets the lower bound of a model’s capability—whether it “knows” things and can “roughly reason.” In the post-training stage—typically supervised fine-tuning (SFT) plus reinforcement learning (RL)—the goal is to “activate” the potential accumulated during pre-training and “align” it to specific tasks. Post-training sets the upper bound—whether the model can “reliably put its known capabilities to use.”
The core claim of this path is simple: when a base model’s potential has not been fully unlocked, rather than spending heavily to retrain a new base, it makes more sense to concentrate compute in the post-training stage and raise the intelligence ceiling through extreme post-training scaling.
Three Key Levers
To make post-training function as a true “first-stage rocket” rather than mere parameter tweaking, three supports are usually needed:
- Long-horizon task environments at tens of times the scale: Let the model repeatedly practice on real, continuous, multi-step engineering task chains, rather than staying at isolated Q&A samples. The closer a task is to real production, the more transferable the strategies the model learns.
- Richer environment types: Cover diverse scenarios such as terminal command lines, code repositories, and cross-tool collaboration. Environmental diversity directly determines the breadth of a model’s generalization and prevents it from “only knowing how to solve one kind of problem.”
- Much longer post-training duration: Trade time for results by stacking more compute into more RL iteration rounds, letting the policy keep improving through trial and error.
The internal logic can be expressed intuitively with a snippet of pseudocode—post-training is at its core a “sample from environment → optimize policy” loop. The more realistic and diverse the environment, the greater the payoff from the loop:
# Illustrative post-training (RL stage) loopfor step in range(training_steps):# 1. Sample trajectories from long-horizon, diverse, realistic environmentstrajectories = env_pool.sample(tasks=diverse_hard_tasks)# 2. Score the trajectories (verifiable rewards are a key advantage for coding/agent tasks)rewards = [verifiable_reward(traj) for traj in trajectories]# 3. Update the policy with RL to raise the capability ceilingpolicy.update(trajectories, rewards)
An Underrated Point
The industry has long carried an invisible hierarchy: modifying the base is treated as a “real upgrade,” while modifying post-training is dismissed as “just tuning.” But advocates of this path have used results to rebut that bias—when a base model’s potential is not yet exhausted, pre-training sets the lower bound, while post-training sets the ceiling. When you can provide more realistic environments and denser reinforcement learning signals, post-training is fully capable of being the main engine of a capability leap, not a supporting role.
Path Two: Rebuilding a Trillion-Scale New Base
The opposite path starts from scratch at the pre-training stage, constructing a base model with larger parameter counts and newer architecture. As sparse architectures like Mixture-of-Experts (MoE) have matured, some leading open-source models have reached trillion-parameter scale, and the scaling-law intuition that “bigger means stronger” still holds.
This path comes at a steep cost: pre-training from zero can consume tens of thousands of accelerators and weeks or even months of continuous compute, and the training process itself is full of uncertainty—data mixtures, hyperparameter settings, and stability problems can all cause an expensive run to come to nothing. But the rewards are equally compelling: a well-designed new base can reserve a higher structural ceiling for target capabilities such as coding, reasoning, and agents from the very beginning, rather than maneuvering within the constraints of an old architecture.
Comparing the Two Paths at Their Core
| Dimension | Post-Training Scaling (no new base) | New Foundation Model (rebuild) |
|---|---|---|
| Iteration speed | Fast, no base retraining needed | Slow, cycles measured in weeks/months |
| Compute cost | Relatively controlled, focused on post-training | Extremely high, with large sunk costs |
| Main risk | Bounded by the old base’s potential | Training instability; a wrong direction means starting over |
| Capability ceiling | Limited by the original base’s architecture | Structurally higher potential |
| Best fit | Base potential not exhausted, fast iteration needed | Pursuing long-term capability leadership with ample compute reserves |
It’s worth emphasizing that the two paths are not mutually exclusive. Ideally, they form a relay: a successful new-base pre-training run is itself later dependent on high-quality post-training to cash in its potential.
How to Evaluate Capability: Coding and Agents Take Center Stage
Why Coding and Agents Became the Litmus Test
Whichever path is taken, vendors tend to use coding and agent capabilities as their core selling points, and there are solid technical reasons behind this. Coding tasks offer a verifiable reward signal—whether code compiles, whether unit tests pass, and whether a task is completed can all be objectively judged by a program. This “verifiability” makes reinforcement learning especially efficient in the coding domain and makes evaluation results relatively objective.
At the same time, real development scenarios are increasingly evolving toward “getting work done in the command line”: intelligent coding tools need to execute commands, read and write files, invoke tools, and collaborate across multiple steps within a terminal environment. Whoever can reliably complete tasks in these long-horizon, multi-tool scenarios holds the most valuable capability dimension today.
How to Read Public Benchmarks
Agent benchmarks in terminal/command-line environments have become an important yardstick for measuring these capabilities. They typically simulate real engineering tasks and assess a model’s planning, execution, and error-correction abilities across long workflows. Two points of clarity are needed when looking at such benchmarks:
- Watch for the gap between “leaderboard gaming” and “real experience”: Benchmark tasks are limited and can be optimized for specifically, while real business scenarios are open-ended and long-tailed. Ranked first does not mean best in your own scenario.
- Pay attention to scenario match: If your business happens to be command-line automation, terminal-style benchmarks carry high reference value; if it’s long-document understanding or data analysis, you should look at evaluations along the corresponding dimensions.
The Value of Internal Hands-On Evaluation
Beyond public benchmarks, vendors often share internal hands-on evaluation figures (such as “coding capability improved by X%”). This data reflects relative improvement on a specific internal test set; it can indicate the “direction of progress between versions” but shouldn’t be directly compared across models. For developers, the most reliable evaluation always comes from running the model on your own real tasks.
The following is a lightweight evaluation framework skeleton that emphasizes “real tasks as the standard”:
# Illustrative: an evaluation framework centered on real business tasksdef evaluate_model(model, task_suite):results = []for task in task_suite: # drawn from real business, not public leaderboardsoutput = model.run(task.prompt)passed = run_tests(task, output) # judge with verifiable metricsresults.append({"task_id": task.id,"passed": passed,"latency": task.latency,"token_cost": task.token_usage})return summarize(results) # summarize pass rate / latency / cost
Context Windows: The Meaning and Traps of Million-Token Scale
Million-token context windows are gradually becoming standard for flagship models. Long context is highly valuable for tasks like “feeding an entire code repository to the model” or “maintaining long-horizon agent memory.” But watch for one trap: a nominal window is not an effective window. Many models exhibit “lost in the middle” behavior under ultra-long contexts, where key information recall drops significantly. So when evaluating long-context capability, you should test the model’s recall accuracy when key information is placed at different positions within the window, rather than just looking at the advertised number.
A Developer’s Guide to Choosing
Faced with the products of these two technical paths, developers should make rational choices from the following angles:
- Scenario match over benchmark scores: First clarify your core scenario (command-line automation, code completion, long-document analysis, multi-turn agent collaboration), then choose a model that performs robustly on that scenario’s benchmarks, rather than blindly chasing an overall leaderboard top spot.
- Value open weights and private deployment: Insisting on open weights is itself an important product strategy. It means you can deploy privately, keep data within your own domain, and fine-tune as needed—which is especially critical for enterprises with data-security sensitivity.
- Consider cloud engineering capabilities: A model’s value is ultimately realized through engineering. Leveraging general cloud platform capabilities—such as container platforms hosting inference services, object storage managing model weights and data, monitoring and alerting safeguarding service stability, and logging services supporting issue tracing—can significantly lower the engineering barrier from “choosing a model” to “going to production.” Taking Baidu AI Cloud as an example, such general cloud product capabilities can help teams focus their energy on business logic rather than low-level operations.
Conclusion
The contest between post-training scaling and new-base expansion won’t have a single answer in the short term. The former wins on agility and controllable cost; the latter wins on potential and ceiling. For developers, what truly matters is not taking sides with one path, but understanding where each capability “comes from” and “where its boundaries lie,” and building an evaluation system centered on your own real tasks. Once you can see past marketing rhetoric and speak with data, the outcome of this race becomes irrelevant to your technical decisions—you already hold the initiative in model selection.
