Implementing W4A4 Quantized GEMM on Next-Gen GPUs: Pipeline Synchronization in Practice

    This article describes a practical engineering effort to implement high-performance W4A4 quantized GEMM kernels on next-generation GPUs. It covers why the usual scaled-MMA + low-rank residual + affine transform structure turns into a complex synchronization problem, how a proven synchronization skeleton from high-performance attention kernels was reused instead of designing a new state machine, and how a single-CTA direct translation evolved into a warp-specialized, dual-CTA persistent kernel with three independent pipelines. It also highlights the highest-ROI fix: a one-line shared-memory accounting error that overestimated the per-CTA footprint, unnecessarily reduced pipeline depth, and cost roughly a +198% TFLOPS improvement. The article closes with practical recommendations on local ceiling benchmarks, resource assertions, and performance regression gates.

    Background: Why W4A4 Quantized GEMM Is a Compute Bottleneck

    In large-model inference, 4-bit weight quantization combined with 4-bit activation quantization, or W4A4, is one of the mainstream ways to reduce memory footprint and improve throughput.

    A typical implementation looks like this:

    • The main matrix multiply uses low-precision tensor-core operations with per-group scaling factors, often called scaled-MMA.
    • A small low-rank residual branch, such as LoRA, is added to compensate for quantization error.
    • A per-output-channel affine transform is applied at the end.

    The math is simple to write down, but the engineering is not. A production-quality implementation on a next-generation GPU tends to use almost every new hardware primitive available on the architecture:

    • dual-CTA cooperative tensor-core instructions,
    • tensor memory, or TMEM,
    • asynchronous copy engines,
    • fine-grained pipeline barriers.

    This kind of kernel is compute-bound in the inference path, so its performance directly affects end-to-end latency. The central question for low-level optimization engineers is how to push the achieved compute throughput, measured as MFU, or the ratio of actual throughput to the chip’s dense peak, high enough on the new architecture.

    Establish a Baseline: Separating Architecture Generation from Implementation Quality

    A common mistake when evaluating kernel performance is comparing across GPU generations. Two GPUs may have similar names, but their tensor-core instruction sets, toolchains, and peak compute can be completely different. In the case described here, the dense 4-bit peak of a data-center-class next-generation chip is more than twice that of a consumer/workstation-class part from the same generation, and the low-precision instructions are not compatible across the two generations. They require separately compiled binaries.

    A more useful evaluation method has three parts:

    1. Use MFU rather than absolute TFLOPS. Dividing achieved throughput by the chip’s peak removes the architecture-size variable.
    2. Establish a local ceiling. On the target machine, use the closest available dense block-scaled GEMM persistent kernel from the vendor’s official library, with the same tile configuration, and measure that as the reference upper bound. In this case, the local ceiling was roughly 45% to 63% MFU.
    3. Treat cross-implementation comparisons as a quality reference only. They tell you what a mature handwritten low-level implementation can achieve on its target chip, but they should not be used as a fair judgment of code quality.

    Core Difficulty: Synchronization State Space in a Complex Pipeline

    A high-MFU GEMM on a next-generation GPU is no longer a monolithic kernel where one warp does everything. To reach high utilization, you usually need:

    • Multi-role warp specialization: load warps, tensor-core issue warps, and reduce/writeback warps each have their own job.
    • Multiple concurrent pipelines: one pipeline for the main K loop, one for low-rank residual prefetch, and one for result writeback. Each pipeline has its own producer/consumer barriers.
    • Dual-CTA cooperation: two CTAs share a single tensor-core operation, so synchronization semantics cross CTA boundaries.
    • Persistent tile scheduling: the kernel stays resident on the SM and loops over tile work, avoiding repeated kernel launch overhead.

    When these factors are combined, the synchronization state space grows rapidly. Writing a hand-rolled barrier state machine makes it very easy to deadlock at boundary conditions: the last tile, an odd number of pipeline stages, or misaligned CTA roles. Worse, these deadlocks often appear only for specific shapes and are extremely hard to reproduce and debug.

    Solution Choice: Reuse a Mature Synchronization Skeleton

    The key decision in this work was not to design a new state machine from scratch, but to borrow the synchronization skeleton from a mature high-performance attention kernel. Three parts of that skeleton were especially useful.

    4.1 Explicit Per-Warp Pipeline State

    Instead of relying on a generic pipeline abstraction to infer state automatically, each warp explicitly holds its own pipeline stage counter and phase bit. Producers and consumers each advance their own state, so the pairing of barrier arrival and wait is easy to inspect.

    The downside is more verbose code. The upside is that deadlocks change from “implicit state corruption” to “explicit state written incorrectly,” which can be caught in code review.

    4.2 Warp Specialization

    Warps are divided into dedicated roles: loading, computing, and reduction. The roles pass data through named barriers and pipeline objects.

    This matches the asynchronous semantics of the copy engines and tensor cores well. A load warp can issue a copy and immediately advance to the next stage, while a compute warp only waits on the stage where data is ready.

    4.3 Persistent Tile Scheduling

    The kernel persists on the SMs and uses a lightweight scheduling loop to claim output tiles one by one.

    There are two benefits. First, it removes tile-to-tile launch and teardown overhead. Second, the pipeline state machine only has to be written once and is reused across tiles, reducing synchronization bugs caused by repeated state resets.

    Refactoring Path: From Single-CTA Direct Translation to Dual-CTA Persistent Version

    The evolution between the two kernel versions in the repository is instructive.

    • v1: single-CTA, single monolithic kernel, using a generic pipeline state abstraction from the standard library. This was a minimal viable version translated from an official example. It reached only about 27% MFU on production shapes.
    • Intermediate attempt: switching directly to dual-CTA tensor-core mode on top of v1 produced almost no gain: 28% versus 27%. The reason was typical. The bottleneck was not tensor-core width. The bottleneck was synchronization overhead and pipeline bubbles. In a monolithic structure, all warps squeeze through one synchronization path, so a wider instruction does not help.
    • v2: a full refactor using the synchronization skeleton above: warp specialization, three independent pipelines, and dual-CTA persistent scheduling. This version became the shipping version and delivered a step-change improvement in MFU.

    The lesson is clear: fix the synchronization structure first, then enable the new hardware feature. New hardware primitives only pay off when the pipeline structure can keep them fed.

    The Highest-ROI Fix: One-Line Shared-Memory Accounting Error

    The highest-return change in the whole project was a one-line accounting fix.

    At trace time, the kernel solves a shared-memory budget problem. Shared memory per SM is fixed, so two questions need to be answered:

    • How many K blocks can the main K loop keep resident simultaneously? This determines pipeline depth.
    • How many prefetch stages can the low-rank residual branch open?

    In dual-CTA mode, the low-rank up-projection weight block is loaded cooperatively by two CTAs. Each CTA is actually responsible for only half of the bytes. But the accounting code still used the single-CTA assumption. It therefore overestimated the per-CTA shared-memory footprint by roughly 2x, which needlessly reduced the pipeline depth and left the tensor cores starving.

    Fixing that one coefficient produced a +198% TFLOPS gain.

    What makes this bug especially dangerous is that smoke tests all passed. The kernel was functionally correct. It was just slow. That points to two engineering rules:

    1. Role-based resource sharing, for shared memory, registers, and similar resources, must be written as explicit assertions or unit tests, not buried inside configuration calculations.
    2. Performance regression tests should be treated with the same priority as correctness tests. Passing smoke tests is not proof that the implementation is correct.

    Engineering Practice Recommendations

    For teams developing similar low-precision operators on next-generation GPUs, these recommendations are worth following:

    • Reuse validated synchronization skeletons first. Spend your innovation budget on data layout and scheduling, not on barrier logic.
    • Build a local ceiling benchmark. Use the vendor library result with the same configuration as the optimization finish line, so you know when to stop chasing.
    • Add assertions for resource estimates. Dual-CTA split accounting, stage counts, and TMEM allocations should all have compile-time or trace-time validation.
    • Make performance testing part of the normal flow. Put MFU into CI gates so that “it works but got slower” does not silently degrade.
    • Document the gotchas. Record deadlock trigger conditions, instruction constraints, and toolchain differences in the repository, with source line references, so future maintainers and AI-assisted tools can find them.

    Conclusion

    The performance battle for low-precision quantized kernels looks like a battle over instructions and tensor cores, but it is really a battle over the quality of concurrent synchronization structure.

    Reusing a mature skeleton instead of reinventing a state machine, making synchronization state explicit so deadlocks can be reasoned about, and correcting a single shared-memory accounting line to recover nearly double the compute throughput: these lessons are not limited to one operator. They apply to any low-level development work that needs to squeeze the last drop of performance out of a next-generation GPU.