Long-Running AI Tasks: A Guide to Capability Evaluation and Quota Cost Management

    As AI agents shift from single-turn Q&A to hours-long autonomous runs, two questions become critical: whether a model can actually handle the task, and whether your quota budget can sustain it. This article lays out a practical framework for long-running AI tasks. It shows how to measure reasoning capability using math problems that have no ready-made answers, how to model token and quota consumption with measured rates and a simple capacity model, and how to organize master-worker agent division of labor to spend quota where it matters most. Readers will find prompt templates, a verification checklist, and governance strategies for budgeting, scheduling, and vendor redundancy.

    1. Long-Running Tasks: Capability Ceiling and Quota Cost Are Both Non-Negotiable

    When you connect a large language model to an automated agent workflow, the typical usage pattern shifts from “one question, one answer” to “set it up and let it run for hours.” You simply define a goal—for example, “prove a proposition and write it up as lecture notes” or “locate a defect in the system and fix it”—and the model decomposes the task, calls tools, checks results, and iterates on its own, potentially running continuously for hours. Many developer-facing coding tools now support parallel sessions and master-worker agent collaboration, and developers often define role boundaries through project convention files.

    The benefits of this pattern are significant, but it also magnifies two questions that are easy to overlook into issues you must address directly:

    • Capability boundary: The harder the task, the more model performance diverges. Verifying a math result that has no ready-made answer demands far more reasoning power than writing a routine script.
    • Quota cost: The longer a task runs, the more acute the tension between short-term rate limits, long-term quotas, and billing. Quota planning directly determines overall output.

    It is worth emphasizing that “capability evaluation” and “quota governance” are not two separate problems. Low-value tasks consume quota as expensively as critical ones, and when the model cannot meet the capability bar, the waste from repeated retries often exceeds a single run’s cost. The two need to be designed together.

    2. Testing Mathematical Reasoning: Real Capability Revealed by “Has an Answer or Not”

    2.1 Designing the Evaluation Task: First Confirm There Is No Ready-Made Answer

    To test mathematical reasoning, the key is to choose problems that “look within reach but actually have no ready-made answer.” Take a public reference library in algebraic geometry as an example: some results in the library are explicitly marked as lacking a proof, or have only a literature citation without a complete derivation. Such propositions are ideal material, for three reasons:

    • “Finding the answer” approaches like retrieval augmentation or training on cited corpora will not work—the model must complete the reasoning itself;
    • The problems are hard enough to separate different models’ performance;
    • The results have a clear right-or-wrong standard, making human review straightforward.

    2.2 Writing the Prompt: Output Requirements Determine Evaluation Quality

    Once the problem is chosen, the prompt determines how much useful information the evaluation can extract. A reusable template:

    1. Task: Prove 【proposition number and full statement】 and write it up as English lecture notes.
    2. Requirements:
    3. 1. This proposition has no ready-made proof in public sources; derive it yourself and do not cite nonexistent references;
    4. 2. The notes must include the theorem statement, required lemmas and their proofs, the main proof, and necessary illustrative examples;
    5. 3. Annotate the definition or known theorem used at each reasoning step; mark gaps to be filled where the derivation breaks down;
    6. 4. Write using common math typesetting syntax and deliver as a plain-text source file.

    Three points in the prompt deserve attention:

    1. “No ready-made proof” must be written into the instructions. This is the first constraint preventing the model from “copying the answer.”
    2. Require the theorems and definitions used to be stated. This leaves clues for line-by-line verification and exposes “citation out of thin air.”
    3. Allow marking uncertainties. This distinguishes “honestly incomplete” from “confidently wrong,” the latter being higher risk.

    2.3 Building a Verification Process: At Least Four Gates

    A model producing a proof does not mean the proof holds. Verify against the following four gates in turn; each directly bears on the actual value of the model’s output:

    1. Citation authenticity: Check each cited theorem to confirm it exists and that its number and version match. Public reference libraries are continually revised, and result numbers may change, so compare against the version the model cited.
    2. Condition applicability: Confirm each known theorem’s premises hold in the current context—for example, whether the relevant ring or scheme satisfies the required assumptions—rather than just applying the conclusion.
    3. Step completeness: Check for skipped steps of the “obviously follows” or “similarly provable” variety. These phrases often appear at the weakest point in the reasoning.
    4. Typesetting correctness: Check that formulas, numbering, and theorem environments compile correctly and that cross-references point to the right entries.

    The following verification prompt can be appended directly after the generation task:

    1. Review the lecture notes above item by item:
    2. 1. List every cited theorem number and indicate whether it applies under the current assumptions;
    3. 2. Flag any unproven assertion or skipped step;
    4. 3. Give the three most suspect pieces of reasoning and explain why.

    2.4 From Individual Cases to a System: The Usage and Difficulty Dimensions

    Regularly evaluating against the same set of 10–20 “no ready-made answer” propositions builds a longitudinal comparison. Track three metrics:

    • First-pass success rate: The proportion of first outputs that pass all verification gates;
    • Repair rate: The proportion that pass after one or two rounds of follow-up;
    • Average consumption: Token usage per problem, convertible to time and cost.

    Each dimension should account for multiple effort levels: direct answer, medium-depth reasoning, and maximum-depth reasoning. Higher is not always better. Different depth levels typically consume quota at different multipliers, and using the highest level for simple tasks is often a main cause of rapid quota depletion.

    A self-built evaluation set also brings one important realization: rankings change rapidly over time. Within a short period, different providers’ flagship models may release one after another, and making technical choices based on the temporary impression of “who is stronger” is unreliable. A clear, dimension-defined evaluation process that you rerun regularly is the only stable and reliable basis.

    3. Quota Consumption and Constraints in Long-Running Tasks

    3.1 Breaking Down a Typical Usage Scenario

    Picture a typical workday:

    • A new quota cycle has just started, with almost no usage in the first three days;
    • At 9 a.m., 4 parallel sessions start, 3 on the highest reasoning level and 1 on the second-highest;
    • Each session’s sub-agents are configured with a lightweight model, and the master agent explicitly requires in the collaboration convention that defect-finding, code review, and small feature additions be delegated to sub-agents as much as possible;
    • By 11:40, about 2 hours 40 minutes later, 35% of the short-term limit and 24% of the cycle quota are used.

    3.2 Calculating Consumption per Hour

    From this data we can derive two key metrics:

    • Short-term consumption rate ≈ 35% ÷ 2.7 ≈ 13%/hour; at sustained full load, a short-term window depletes in about 7.7 hours;
    • Cycle consumption rate ≈ 24% ÷ 2.7 ≈ 9%/hour; at this rate, the cycle quota depletes in about 11 hours.

    Converting both to the same time scale, the short-term limit is roughly 70% of the cycle quota. Measured against the original cycle quota, this usage intensity is close to consuming 1.5 short-term windows per hour. Even with sub-agents already offloaded to a lightweight model, nearly half of the consumption comes directly from the main model, showing that the stacking effect of parallel sessions is far stronger than intuition suggests.

    3.3 Building a Quota Budget and Capacity Model

    Note: the two-tier limit structure, how quota is allocated within a cycle, and the conversion rules for model versions and reasoning levels differ across providers. The estimates above only illustrate the analysis method; the actual service terms govern. On this basis, you can build a simplified capacity model:

    1. # Simplified capacity model: to estimate quota consumption rate
    2. # Refer to your specific service terms for exact rules
    3. # Input: recent average consumption per model/level (as a percentage of quota)
    4. RATE = {
    5. "primary_high": 8.0, # Primary model, highest level: consumption per hour
    6. "primary_mid": 4.0, # Primary model, second-highest level
    7. "sub_light": 0.4, # Sub-agent, lightweight model
    8. }
    9. WORKLOAD = [
    10. ("primary_high", 3), # 3 highest-level sessions
    11. ("primary_mid", 1), # 1 second-highest-level session
    12. ("sub_light", 4), # each primary session has a lightweight sub-agent
    13. ]
    14. hourly = sum(RATE[k] * n for k, n in WORKLOAD)
    15. weekly_budget = 100.0 # one cycle quota
    16. short_window_hours = 5 # hours in one short-term window
    17. print(f"Hourly consumption: {hourly:.1f}%")
    18. print(f"Short-window hourly consumption: {hourly * short_window_hours:.1f}%")
    19. print(f"Cycle quota duration: {weekly_budget / hourly:.1f} hours")
    20. print(f"Equivalent short windows: {weekly_budget / (hourly * short_window_hours):.1f}")

    The sample parameters only demonstrate the calculation logic. Substituting the measured rates from Section 3.2, the result is approximately: 9% per hour, 45% per short-term window, the cycle quota lasting about 11.1 hours, or roughly 2.5 short-term windows. The conclusion is intuitive:

    • Running at full load for about 11 hours a week exhausts the quota—a very high intensity for a 7-day cycle.
    • Using it at full load 10 hours a day depletes the cycle quota within 2–3 days; and idle time in the first few days does not automatically “save up” for later.

    So watching only the remaining percentage is not enough. Combine “days elapsed in the cycle,” “remaining cycle quota,” and “short-term window recovery time” for a complete picture.

    3.4 Four Quota Governance Strategies

    1. Tiered level selection

      • Reserve the highest level for genuinely hard core problems: proving key lemmas, locating difficult defects, designing architecture.
      • Routine code review, format checks, and small features are handled by lightweight or lower levels.
      • First compare the effect of each level on a fixed small sample, then decide the threshold for upgrading.
    2. Unified entry point, unified scheduling

      • Multiple sessions each running to the short-term limit drains the total quota within a very short calendar time.
      • Use message queues and task queues for scheduling and priority control, run lightweight tasks on container platforms or function compute, and continuously observe usage through log services and monitoring alerts.
      • Take Baidu AI Cloud as an example: you can combine general cloud capabilities such as its message queue, function compute, containers, and monitoring alerts to build a unified scheduling and observability layer for agent tasks.
    3. Set budgets and alerts

      • Write the maximum reasoning level per task, maximum rounds, and estimated token cap into the project-level convention file;
      • Set usage alerts for single calls, single sessions, and the whole cycle separately;
      • When the short-term limit is nearly full, automatically pause the task in a pending state instead of letting it retry repeatedly in errors.
    4. Staggered scheduling and task orchestration

      • Short-term limits usually recover on a rolling time window; task queues should recognize recovery times and turn waiting into queuing rather than idling;
      • Spread parallel independent sub-tasks across different time slots to smooth peaks and fill valleys, raising output per unit of quota;
      • Schedule long tasks during off-peak periods such as night or weekends;
      • Reduce redundant calls, and make full use of mechanisms like context caching and result reuse to lower repeated computation.

    4. Master-Worker Division of Labor: Spend Quota Where It Matters Most

    4.1 Clarifying Master-Worker Agent Responsibility Boundaries

    Whether long-running tasks proceed stably depends largely on clear master-worker division. Follow the principle of “master coordinates, worker executes, master accepts”:

    • Master agent: Responsible for goal decomposition, solution decisions, key reasoning, and final acceptance;
    • Sub-agents: Use a lightweight model and take on repetitive work that is locally verifiable and easy to check, such as code review, defect-finding, small feature implementation, and test case additions.

    4.2 Solidifying Rules in the Collaboration Convention

    Below is a sample framework for a collaboration convention file, adjustable to your project:

    1. # Project Collaboration Convention (illustrative)
    2. ## Master Agent
    3. - Responsible for goal decomposition, architecture decisions, and key reasoning, using the highest reasoning level;
    4. - Aggregate and review sub-agent output; only fully verified tasks may be submitted.
    5. ## Sub-agents (lightweight model)
    6. - Defect-finding: provide file and line number, trigger conditions, impact scope, and suggested fix;
    7. - Code review: output an issue list and risk level across correctness, security, readability, and performance;
    8. - Small features: follow the existing code style, add unit tests, and output a change list.
    9. ## Quota Rules
    10. - Each master task may spawn at most N sub-tasks, with at most 2 retries per sub-task;
    11. - Tasks involving global reasoning must not be delegated to sub-agents;
    12. - When a budget threshold is reached, pause and report, letting a human decide whether to continue or terminate.

    A common failure mode: sub-agents produce changes that “look complete,” the master agent merges them without verification, and defects then erupt en masse during integration. The convention file’s role is not just task delegation—it sets a unified gate for result quality.

    4.3 Turning Division-of-Labor Advantages into Quantifiable Benefits

    Measure whether the division succeeds with three metrics:

    • Whether the primary model’s consumption share declines;
    • Whether the quota cost per unit of effective output (per fixed problem, per completed feature) declines;
    • Whether the rework rate rises.

    If the third metric worsens, the delegation granularity or acceptance criteria need re-adjustment.

    4.4 Reducing Vendor Dependency with an Adapter Layer

    If the service integration method is singular, any rate limiting, outage, or price change forces the entire workflow to halt. Introduce a model adapter interface at the architecture level:

    1. Application layer → Model adapter layer (unified interface) → Routing strategy → Specific model service

    The routing strategy can select a model based on task type and complexity; when the primary model is unavailable, it automatically switches to a backup service. Only then can conclusions from model capability comparison become an executable scheduling strategy, rather than staying a subjective impression.

    5. Conclusion: Measure, Budget, Orchestrate

    Back to the original question: whether long-running tasks perform well and whether the cost is sustainable can be answered with three things.

    1. Measure capability with tasks that “have no ready-made answer.” Look less at rankings, run your own evaluations more, and confirm output quality with a verifiable process.
    2. Plan budgets with measured rates and a capacity model. Short-term limits and cycle quotas must be calculated together, with clear consumption differences across levels.
    3. Orchestrate with the “master coordinates, worker executes” division to spend quota where it matters. Also build vendor redundancy so that capability advantages truly convert into sustainable output.

    In a stage where both model capabilities and plan rules change rapidly, the only reliable approach is to turn both capability evaluation and quota governance into quantifiable, reproducible, continuously iterable engineering processes.