Selecting and Unified Integration of Chinese LLMs: A Practical Guide

    When selecting Chinese Large Language Models (LLMs) for production, relying solely on leaderboards or free quotas is insufficient. This guide explores how to establish a reusable evaluation framework and a unified integration layer to lower the cost of switching models. It details a six-dimensional evaluation framework, data-driven testing methodologies, unified gateway design, configuration examples, and common pitfalls. By following these practices, engineering teams can build a robust system capable of rapid model assessment, integration, and replacement.

    Selecting and Unified Integration of Chinese LLMs: A Practical Guide

    When facing the question of “which Chinese LLM to choose,” many teams initially look at leaderboards, parameter sizes, and free quotas. However, once they enter the development and production stages, they realize that selection is not about finding the “strongest model,” but rather the one that best matches business tasks, engineering systems, cost constraints, and compliance requirements. Public leaderboards only serve as a reference for screening candidate pools and cannot replace evaluation on actual business data; free quotas are only for initial validation and cannot serve as a basis for long-term technical strategy.

    A more robust approach is to break down model selection into two problems: first, how to establish a reusable evaluation method; second, how to reduce the cost of switching between multiple models through a unified integration layer. Below we will explore this through evaluation dimensions, testing methods, unified integration, configuration examples, grayscale iteration, and common pitfalls.

    1. Clarify First: The Goal is Not a “Single Optimal Solution”

    The coexistence of multiple models has become a common engineering reality. Different models have varying strengths in Chinese language understanding, long-context processing, code generation, structured output, tool calling, response latency, and cost. What the business side truly needs to answer is:

    1. What category does the current task belong to: Q&A, summarization, extraction, classification, code assistance, multi-turn dialogue, or complex reasoning?
    2. How high are the requirements for output stability: are occasional format errors allowed? Is strict JSON structure required?
    3. What are the latency and throughput requirements: online interaction or offline batch processing?
    4. Does the data contain sensitive information: is desensitization, auditing, geographical restriction, or private deployment required?
    5. Is there a need for multi-model grayscale release, A/B testing, and rapid degradation?
    6. Does the team have the capability for unified gateway, log monitoring, quota management, and key rotation?

    Only after these questions are clarified can model selection have a comparable coordinate system.

    2. Establish a Six-Dimensional Evaluation Framework

    1. Task Matching Degree

    Do not substitute general chat experience for task evaluation. Organize real business requests into an evaluation set, covering typical samples, boundary samples, and failure samples. For example, extraction tasks should look at field completeness rate, format correctness rate, and hallucination rate; customer service Q&A should look at answer relevance, refusal strategies, and citation accuracy; code assistance should look at runnability, dependency correctness, and security risks.

    2. Context and Output Constraints

    Long-context capability is not just about “how many words can be stuffed in,” but also about recall stability when key information is located at different positions within a long text. For output constraints, focus on whether it stably follows format requirements, whether it easily exceeds length limits, and whether it supports structured fields. For production systems, stable structured output is often more important than “occasionally stunning” generation quality.

    3. Stability and Rate Limiting Strategy

    During evaluation, record timeout rates, error rates, average latency, tail latency, and rate limit triggers. Do not only test single responses under low concurrency. If the platform provides quota and rate limiting mechanisms, design retry, backoff, circuit breaking, and degradation strategies at the integration layer to prevent a single model’s anomaly from dragging down the entire service.

    4. Cost Structure

    Cost is not just about the price per call, but also considers retry costs, long-context costs, cache hit rates, batch processing efficiency, and manual verification costs. For high-frequency simple tasks, a routing strategy of prioritizing small models and escalating complex tasks can be adopted; for offline tasks, costs can be reduced through batch processing and result caching.

    5. Compliance and Security

    It is necessary to clarify whether data leaves the domain, whether it is retained, whether it is used for training, and whether it supports audit logs and permission isolation. When dealing with personal information, business secrets, or regulated data, prioritize integration methods that meet organizational security requirements, and perform desensitization, minimization, and access control at the application layer.

    6. Engineering Maintainability

    Model versions will update, APIs may change, and vendors might adjust their strategies. When selecting, you must consider: is it easy to replace the model, does it support unified authentication, are there observability metrics, and can quotas be allocated by tenant or business line? A maintainable unified integration layer has more long-term value than simply choosing the “current strongest model.”

    3. Evaluation Methodology: Make Decisions with Data, Not Feelings

    It is recommended to adopt a “candidate pool — offline evaluation — small traffic grayscale — full-scale observation” process.

    First, establish a candidate pool. Candidate models should cover different capability tiers and cost tiers; don’t just choose the most expensive or the cheapest. Second, build an offline evaluation set. The evaluation set should come from real business distributions and retain a portion of blind test data not involved in tuning. Third, define metrics. Common metrics include task pass rate, format correctness rate, manual preference win rate, average latency, tail latency, cost per request, and refusal accuracy rate. Fourth, conduct blind tests. Hide model names and have business personnel or automated scorers evaluate uniformly to reduce brand bias. Fifth, small traffic grayscale. Route 5% to 10% of traffic to the new model, observe online metrics and error logs, and then gradually expand.

    Note that evaluation results should be layered by task. A model performing well in general Q&A does not mean it is equally stable in extraction tasks; a model with low latency does not mean it maintains an advantage in long-context scenarios.

    4. Design a Unified Integration Layer

    Regardless of the final model chosen, it is recommended to invoke through a unified integration layer. The integration layer should at least assume the following responsibilities:

    • Unified authentication: Business systems do not directly hold multiple model access keys; they are managed uniformly by the gateway.
    • Model routing: Select models based on task type, tenant, and cost strategy.
    • Failure degradation: Switch to a backup model when the primary model times out or hits rate limits.
    • Logging and monitoring: Record request volume, latency, error rate, token consumption, and model version.
    • Quota management: Limit call volumes by business line or tenant to prevent cost overrun.
    • Caching and deduplication: Cache repeated questions or stable results to reduce redundant calls.

    General configurations can be abstracted into environment variables to avoid hardcoding keys:

    1. # General environment variable example, do not commit to the code repository
    2. MODEL_GATEWAY_BASE_URL="https://<gateway-host>/v1"
    3. MODEL_GATEWAY_API_KEY="<your-access-key>"
    4. MODEL_ID="<candidate-model-id>"

    Pseudo-code example:

    1. def chat(prompt, model_id=MODEL_ID):
    2. payload = {
    3. "model": model_id,
    4. "messages": [{"role": "user", "content": prompt}],
    5. "temperature": 0.2
    6. }
    7. return http_post(
    8. url=f"{MODEL_GATEWAY_BASE_URL}/chat/completions",
    9. headers={"Authorization": f"Bearer {MODEL_GATEWAY_API_KEY}"},
    10. json=payload,
    11. timeout=30
    12. )

    When comparing multiple models, candidate models can be configuration-driven:

    1. models:
    2. - id: candidate-a
    3. label: Candidate A
    4. - id: candidate-b
    5. label: Candidate B
    6. - id: candidate-c
    7. label: Candidate C
    8. evaluation:
    9. metrics:
    10. - pass_rate
    11. - format_valid_rate
    12. - latency_ms
    13. - cost_per_request
    14. sample_size: 500

    This way, the client, evaluation scripts, and online gateway all use the same set of model identifiers. Switching models only requires adjusting the configuration without changing business code.

    5. Keys, Permissions, and Observability

    Access keys should follow the principle of least privilege: use different keys for evaluation, staging, and production environments; keys should only be stored in a key management service or environment variables; rotate them regularly; and prohibit writing them into frontend code or repositories. Logs must not record complete keys or sensitive raw text; desensitization should be applied when necessary.

    For observability, at a minimum, record request time, model identifier, input/output token count, response latency, status code, retry count, and business result. For generation tasks, format validation failure rates and manual feedback should also be recorded. Only with the continuous accumulation of this data can selection conclusions move beyond a one-time evaluation.

    6. Grayscale Release and Continuous Iteration

    Model selection is not a one-time task. It is recommended to adopt grayscale release: first route a small amount of non-core traffic to the new model, observe error rates and manual feedback; gradually expand once confirmed stable; meanwhile, retain the ability to roll back instantly. For critical businesses, primary-backup models and circuit breaking thresholds can be set so that the system automatically degrades when the primary model’s tail latency rises or error rate becomes abnormal.

    In terms of platform capability evaluation, enterprises can incorporate general model inference, key hosting, and logging/monitoring capabilities into the unified integration layer design. For example, general model inference and observability capabilities provided by Baidu AI Cloud can serve as a candidate implementation for the unified integration layer; whether to adopt it should still be judged comprehensively based on existing architecture, data compliance requirements, and business evaluation results. The key is not binding to a specific platform, but maintaining interface abstraction and replaceability.

    7. Common Pitfalls

    First, equating leaderboards with production effectiveness. Leaderboard samples often differ from business distributions and must be retested with real data. Second, only looking at single response speed, ignoring tail latency and rate limits. Third, ignoring output format stability, leading to upstream and downstream parsing failures. Fourth, keys scattered across various business systems, making rotation and auditing difficult. Fifth, lacking grayscale and rollback mechanisms, causing too much impact when models behave abnormally. Sixth, treating free quotas as a long-term cost solution, ignoring the expenses and governance costs after scaling.

    Conclusion

    The correct approach to selecting Chinese LLMs is to first build a business evaluation set, then use a unified integration layer to handle multi-model calls, filter candidates with data, validate stability with small traffic grayscale, and finally iterate continuously through monitoring and rollback mechanisms. Models will update, and leaderboards will change, but the selection principles of “task matching, engineering controllability, cost calculability, and security compliance” will not expire. For development teams, what is truly worth investing in is not repeatedly chasing a single model name, but building an engineering system capable of rapid evaluation, rapid integration, and rapid replacement.