Spec-Driven Development with Reflection Gates: A Practical Workflow for AI-Assisted Coding

    This article explains why code review alone is insufficient in spec-driven development and how to embed reflection gates across exploration, proposal, pre-implementation, post-implementation, and verification/archiving stages. It presents a dual-loop, five-gate workflow, concise checklists, pseudocode, and practical lessons on benefits, costs, risk-based gating, and common failure modes.

    Spec-Driven Development with Reflection Gates: A Practical Workflow for AI-Assisted Coding

    Spec-driven development (SDD) centers on writing requirements, constraints, acceptance criteria, and design intent as executable specifications, then letting AI coding tools implement against those specifications. Compared with asking a model to write code directly, SDD can significantly improve control in complex projects: changes have boundaries, implementation has a basis, and verification has an anchor. But in real projects, even when using a loop such as explore-proposal-implement-verify-archive, generated code can still contain hidden defects, miss boundary cases, underestimate impact, and gradually accumulate complexity that is hard to maintain.

    After practicing this approach for a period of time, I reached a key conclusion: the problem is often not the final code generation step, but the quality of the upstream specification proposal. Many teams discuss requirements, generate a proposal document, and then rush the model into implementation, skipping the requirements review and design review that are so important in traditional software engineering. As a result, input defects enter the implementation stage, and the team can only rely on code review and testing to catch them later, which is costly and easy to miss. This article discusses how to introduce a reflection mechanism into the SDD workflow, move quality gates earlier, and make AI coding tools more reliable on complex tasks.

    Why Code Review Alone Is Not Enough

    Code review is valuable, but it has inherent limitations. First, code review looks at an already implemented result. Reviewers are easily drawn to implementation details and find it difficult to reverse-check whether the specification is complete. Second, many defects are not syntax errors but missing requirements, undefined boundaries, unconsidered compatibility, undesigned data migration, and uncovered exception paths. These issues may look reasonable at the code level and can only be found by returning to the specification layer. Third, post-implementation review usually happens late; once a directional error is found, the cost of rework is already high.

    In traditional development, product requirements go through requirements review before coding, and design documents go through design review before development. The purpose of review is not formalism but to expose ambiguities, conflicts, omissions, and unverifiable points early. In SDD, the proposal document essentially carries the compressed responsibility of both requirements review and design review. If reflection on the proposal is skipped, unreviewed input is handed directly to the model for implementation. The more capable the model, the more clearly bad input gets amplified.

    Therefore, reflection should not be placed only after implementation. It should be embedded in multiple key stages of SDD. Its basic form is generate-criticize-revise-confirm: first have the model generate a stage artifact, then require it to conduct a critical review against a structured checklist, revise after identifying inconsistencies, omissions, and risks, and finally confirm with verifiable criteria whether the artifact can move to the next stage.

    Where Reflection Belongs: Dual Loops and Five Gates

    The approach I use can be summarized as dual loops plus five gates. The inner loop happens within each stage, reflecting on and revising stage artifacts. The outer loop connects specification, implementation, and verification, ensuring that code remains traceable to the specification. The five gates are placed at the exploration, proposal, pre-implementation, post-implementation, and verification/archiving stages.

    1. Exploration Reflection: Confirm the Problem and Acceptance Criteria

    The goal of the exploration stage is not to write a solution immediately, but to clarify the problem space. The reflection checklist should focus on: What is the goal? What are the non-goals? What is the current behavior? What constraints exist? How will unknowns be verified? Are the acceptance criteria testable? In particular, ask: If this requirement were not implemented, what difference would users see? Which inputs and states are still undefined? Which existing modules might be affected? If the acceptance criteria cannot be converted into tests or clear checks, the specification is not solid enough.

    2. Proposal Reflection: Treat the Specification as a Design Review Object

    The proposal stage is where reflection deserves the most investment. The checklist should cover scope and non-goals, boundary conditions, exception paths, compatibility, data changes, security and permissions, observability, test strategy, impacted modules, and rollback plans. Each point needs substantive discussion, not a checkbox. For example, “consider boundary conditions” is too vague. It should become “how should empty input, oversized input, duplicate submission, concurrent modification, and partial failure each be handled?” The purpose of reflection is to turn the proposal from something that “looks reasonable” into something that is implementable, verifiable, and rollbackable.

    3. Pre-Implementation Reflection: Split Changes and Determine Order

    Before implementation, the model should reflect on whether the change breakdown is reasonable: Can it form the smallest closed loop? Is the dependency order clear? Are tests written first? Are unrelated refactorings mixed in? Are there cross-module cascading impacts? For medium- and high-risk changes, require each small step to be independently verifiable, avoiding the generation of a large block of code that is hard to debug afterward.

    4. Post-Implementation Code Reflection: Check Against the Specification, Not Just Style

    Post-implementation code review should not only check naming and formatting. It should check the specification item by item: Are all acceptance criteria implemented? Are exception paths covered? Are resources released correctly? Are concurrency and idempotency considered? Are logs and monitoring sufficient? Do tests cover key branches? Are there changes outside the specification? The review agent should cite specific evidence, such as “which acceptance criterion is covered by which test” and “which exception branch is not handled,” rather than giving vague comments.

    5. Verification and Archiving Reflection: Record Decisions and Uncovered Risks

    In the verification stage, reflect on whether test results truly prove that the specification has been met, which scenarios remain uncovered, and which risks have been accepted. In the archiving stage, record key decisions, reasons for tradeoffs, and reusable lessons to provide context for later changes. Many project problems are not caused by a single mistake but by later modifications forgetting the original constraints. Archiving reflection reduces the risk of “change one place and forget another.”

    Actionable Reflection Checklists and Process Pseudocode

    For the reflection mechanism to work in practice, checklists must be short and strict, with each item as verifiable as possible. Specification reflection can ask: Is the goal single and clear? Are non-goals explicit? Are inputs and outputs defined? Are exceptions and boundaries listed? Are compatibility and migration explained? Is the test strategy executable? Are all impacted modules listed? Is rollback feasible? Code reflection can ask: Is each acceptance criterion met? Are nulls, duplicates, concurrency, and partial failures handled? Are unrelated changes introduced? Are there corresponding tests? Are documentation and configuration updated?

    A simplified process looks like this:

    1. def sdd_with_reflection(task):
    2. context = explore(task)
    3. spec = draft_spec(context)
    4. for round in range(MAX_SPEC_ROUNDS):
    5. issues = reflect(spec, "spec review checklist")
    6. if not issues:
    7. break
    8. spec = revise(spec, issues)
    9. if not spec_ready(spec):
    10. return escalate_to_human(spec)
    11. plan = split_change(spec)
    12. for step in plan:
    13. pre_check = reflect(step, "pre-implementation checklist")
    14. change = implement(step, pre_check)
    15. code_issues = reflect(change, "code review checklist")
    16. change = revise(change, code_issues)
    17. run_tests_and_static_checks(change)
    18. verify(spec, change)
    19. archive_decisions(spec, change)

    There are two key constraints here. First, reflection rounds must be limited, for example two to three rounds in the specification stage. Beyond that, escalate to human arbitration to avoid the model consuming itself in a loop. Second, reflection results must be actionable. They cannot be empty statements such as “recommend optimization” or “pay attention to boundaries.” They must map to specific clauses, tests, modules, and risks.

    Real Experience: Clear Benefits, but Not a Free Lunch

    In roughly one month of personal projects and internal trials, I compared direct implementation with SDD with reflection gates across multiple general-purpose large models. Subjectively, after introducing reflection, directional errors in the implementation stage decreased noticeably, requirement omissions found only during verification became less frequent, code aligned more closely with the specification, and rework decreased. Process constraints helped relatively weaker models more clearly, but they cannot replace model capability or human judgment. Complex refactoring, cross-module impact, and critical business logic still require spot checks and decisions from senior developers.

    The cost is also direct: more review rounds bring additional time and token costs, and the overhead ratio is especially high for small tasks. Therefore, I do not recommend running every change through the full gate set. Instead, use risk-based gating: low-risk small changes go through lightweight checks; medium- and high-risk changes go through full specification reflection and post-implementation review; critical systems must retain human review. The value of the reflection mechanism is not to let the model “prove itself correct,” but to move defect discovery earlier and leave traceable decision evidence.

    Failure modes to watch for include: checklists that are too long and cause the model to go through the motions, reflection that is vague and unverifiable, model self-affirmation, specifications that are not testable, and infinite loops. Countermeasures include keeping checklists concise, requiring cited evidence, limiting rounds, anchoring to tests and acceptance criteria, and using human arbitration when necessary. Reflection cannot replace automated tests, static checks, or human review. It is only one part of the quality gate system.

    Implementation Advice

    If you want to start practicing today, begin with proposal-stage reflection, because it offers the highest return on investment. Create a short template for the team and make acceptance criteria, boundary conditions, impacted modules, and test strategy mandatory fields. Then gradually add post-implementation code reflection and archiving retrospectives. Use rework count, defects found during verification, change size, and types of review issues as lightweight metrics, and prune the checklist regularly. Finally, clarify the human-machine boundary: the model generates, reflects, and provides evidence; humans decide risk tradeoffs and final confirmation. In this way, SDD becomes more than “asking the model to write code from a document.” It becomes an auditable, iterable, and deliverable engineering process.