AI Coding Agents for Long-Horizon Engineering Tasks: A Four-Metric Benchmark Analysis
This article examines a public benchmark of AI coding agents evaluated on 30 long-horizon tasks that resemble real engineering delivery, including application creation, feature development, code migration, and application conversion. It compares two representative approaches using pass rate, average completion, runtime, and per-run cost, and explains how high completion rates and long execution times reflect a quality-first, cost-later engineering tradeoff. It also outlines how teams can build their own long-horizon evaluation framework, choose agents based on task profiles rather than leaderboard rank alone, and manage the security, compliance, and reproducibility risks associated with autonomous coding agents.
1. Background: A Benchmark Disclosure from a Real-Engineering Perspective
Recently, the official developer community of a mobile operating system published benchmark results for a set of AI coding agents. The evaluation included 30 tasks covering application creation, feature development, code migration, and application conversion. Execution times ranged from several hours to tens of hours. This type of benchmark differs from common code completion or function-level generation tests: it is closer to the daily delivery work faced by engineering teams than to algorithmic single-point capability tests.
The public data showed the sharpest difference between two approaches:
- Scheme A: Built around its companion AI coding tool. It achieved a 24.0% pass rate, 82.3% average completion, 27.4 hours average completion time, and about $317.4 per single benchmark run.
- Scheme B: Built around another AI coding tool. It achieved a 17.3% pass rate, 71.2% average completion, 12.0 hours average completion time, and about $9.9 per single run.
On the same task set, Scheme A had a higher pass rate than several other publicly reported schemes, but lower than the highest-performing one on the leaderboard. The most notable difference was cost: a run of Scheme B cost less than one-thirtieth of Scheme A and took about half as long. This raises a key question: how should teams interpret “high completion, long runtime,” and how should they turn it into a practical decision criterion?
2. Why Long-Horizon Tasks Have Become a New Yardstick for Coding Agents
Evaluating an AI coding system has broadly gone through three stages:
- Snippet completion: measuring correctness for single-line or single-function code;
- Defect fixing: tasks such as locating and fixing real defects, which require understanding context, root cause, and regression risk;
- Long-horizon delivery: starting from a nearly blank engineering baseline and going through requirement analysis, architecture design, multi-module implementation, debugging, and validation, finally producing something buildable, runnable, and testable.
The difficulty of long-horizon tasks is not simply “writing code,” but “finishing the whole journey”:
- Context growth and forgetting: as conversation history and file operations accumulate, early constraints and architectural decisions are easily diluted or forgotten;
- Error accumulation and drift: one incorrect change can trigger a chain of problems. If the agent lacks effective rollback and self-checking mechanisms, it may waste budget in local loops;
- Tool orchestration and state consistency: file reads/writes, terminal execution, build validation, and test runs must be combined in the right order, with decisions based on the actual engineering state;
- High evaluation cost: a single task may take many hours, which naturally corresponds to high compute and financial cost. Therefore, metrics must account for both “quality” and “cost.”
As a result, a credible long-horizon benchmark usually has four characteristics:
- Tasks are close to real business needs;
- Judging is as automated and reproducible as possible;
- Multiple metrics are recorded, rather than a single total score;
- Runtime cost is transparent enough for horizontal comparison.
3. Four-Metric System: Pass Rate, Completion, Time, and Cost
1. Pass rate: a hard gate that determines whether the result is deliverable
Pass rate measures how many tasks eventually meet all predefined acceptance conditions, such as successful builds, passing key tests, and no serious static-check issues. It is a strict 0-or-1 indicator, closest to delivery results and most indicative of the lower bound of engineering usability.
2. Average completion: process quality and “how far short” the agent falls
Completion is usually calculated as a weighted ratio based on a task checklist or acceptance points. It answers “what percentage was completed.” It can distinguish between failures such as “one step away from delivery” and “the direction is completely wrong,” making it especially useful for identifying product capability gaps.
3. Average elapsed time: throughput and collaboration rhythm
Elapsed time includes model inference time as well as serial waits such as tool execution, build compilation, and test running. In agile iteration, it directly affects whether a task can be completed within the same working day.
4. Cost per run: whether the approach can scale
Cost figures should at least clarify three things: whether retries and rollbacks are included, whether environment and dependency preparation are included, and whether the cost is calculated per batch or per task. Without a clear definition, cross-scheme cost comparisons have limited value.
4. Deep Analysis: What “High Completion, Long Runtime” Means as an Engineering Tradeoff
Simple calculations on the public data make the conclusion clearer. The following values are derived from the public figures and are used to illustrate the methodology:
- Cost per pass-rate point: Scheme A is about $317.4 ÷ 24.0 ≈ $13.2 per percentage point of pass rate; Scheme B is about $9.9 ÷ 17.3 ≈ $0.57 per percentage point. The cost of “buying” each pass-rate point for Scheme A is about 23 times that of Scheme B.
- Throughput efficiency: Scheme A is about 24.0% ÷ 27.4 ≈ 0.88 percentage points per hour; Scheme B is about 17.3% ÷ 12.0 ≈ 1.44 percentage points per hour. In terms of output per unit time, Scheme B is about 60% higher.
- Gap between completion and pass rate: Scheme A’s completion is about 11.1 percentage points higher, while its pass rate is only about 6.7 percentage points higher. The additional “completion” mostly remains in process output and has not translated proportionally into deliverable results.
This shows that high completion and long runtime reflect an engineering orientation of “quality first, cost later”:
- Advantages: for tasks such as migration and refactoring, where one missing boundary case can invalidate the whole result, deep validation and multiple rounds of self-correction can significantly improve the final deliverable rate and reduce manual rework;
- Costs: both time cost and financial cost increase, and cost growth is faster than benefit growth, making marginal returns decline clearly;
- The opposite orientation: Scheme B is closer to “efficiency first, budget controlled.” It is suitable for batch, low-risk tasks that can be quickly reviewed by humans, allowing saved budget to expand task coverage.
Another notable phenomenon is that the performance of a coding agent is not strictly correlated with the maturity stage of the underlying model. Besides the model’s coding and reasoning ability, the final result is also affected by the engineering implementation of the AI coding tool it relies on, including task planning, context management, tool-call orchestration, and error recovery. In other words, for long-horizon tasks, the combined quality of “model capability + engineering framework” is often more explanatory than model parameter size alone.
From the leaderboard perspective, results show a layered structure: the first tier has pass rates approaching 30%, the middle group clusters around 20%, and another group falls between 10% and 20%. For teams, this means selection should not start with “who is first,” but with their own task distribution and constraint boundaries.
5. Designing Your Own Long-Horizon Task Evaluation
1. Task-set construction principles
- Real source: draw tasks from backlog requirements, historical defects, and customer feedback, avoiding tasks invented only for evaluation;
- Automated judging: each task should have a clear acceptance script or test cases; otherwise, large-scale repeatable evaluation is impossible;
- Difficulty stratification: tasks can be organized into three tiers — beginner (single-module feature), intermediate (cross-module interaction), and advanced (architecture-level refactoring/migration) — with a suggested ratio such as 4
2; - Leakage prevention: rotate tasks regularly and retain a private set to avoid inflated scores caused by agents “memorizing” public tasks.
2. Metric collection and statistical methods
- Record pass rate, completion, elapsed time (report P50 and P90, not only the mean), and cost at the same time;
- Repeat each task 3 to 5 times and report the mean and variation range to prevent a single run from dominating conclusions;
- Break “completion” into explainable items, such as requirement understanding, architectural reasonableness, code correctness, test coverage, and maintainability, making it easier to locate weaknesses;
- Track “retry count” and “human intervention time” separately, because these are often ignored but represent real costs.
3. A minimal practical evaluation skeleton (illustrative)
# Illustrative code: a minimal skeleton for long-horizon task evaluation; fields and interfaces should be adapted to the actual environmentfrom dataclasses import dataclass, fieldimport time, json@dataclassclass TaskCase:task_id: strprompt: str # requirement description and constraintsrepo_seed: str # initial repository snapshot (near-blank or containing baseline code)verify_cmd: list[str] # automated acceptance commands, such as build + unit tests + static checksrubric: dict # weights for completion scoring; the total is 1.0budget_usd: float = 10.0 # cost cap per task to prevent runaway behaviortimeout_sec: int = 3600 # timeout for a single task@dataclassclass TaskResult:task_id: strpassed: bool = Falsecompletion: float = 0.0elapsed_sec: float = 0.0cost_usd: float = 0.0retries: int = 0human_minutes: float = 0.0logs: list[str] = field(default_factory=list)def run_one(case: TaskCase, agent) -> TaskResult:"""Run one task in an isolated temporary workspace and return a structured result"""r = TaskResult(task_id=case.task_id)t0 = time.time()ws = prepare_workspace(case.repo_seed) # copy the snapshot to ensure rollback and reproducibilitytry:outcome = agent.solve(workspace=ws,instruction=case.prompt,max_cost_usd=case.budget_usd,max_seconds=case.timeout_sec,)r.retries = outcome.retriesr.cost_usd = outcome.cost_usd# acceptance: passed=True only if all verification commands succeedr.passed = all(run_cmd(c, cwd=ws) == 0 for c in case.verify_cmd)# completion: score each rubric item and compute a weighted totalr.completion = sum(score_item(item, ws) * w for item, w in case.rubric.items())except Exception as e:r.logs.append(f"failed: {e}")finally:r.elapsed_sec = time.time() - t0teardown_workspace(ws) # clean up the environment to avoid cross-task contaminationreturn rdef summarize(results: list[TaskResult]) -> dict:n = len(results)return {"pass_rate": sum(r.passed for r in results) / n,"avg_completion": sum(r.completion for r in results) / n,"avg_elapsed_hour": sum(r.elapsed_sec for r in results) / n / 3600,"avg_cost_usd": sum(r.cost_usd for r in results) / n,"cost_per_pass_point": (sum(r.cost_usd for r in results)/ (100 * sum(r.passed for r in results) / n)if any(r.passed for r in results) else None),}
Three design points in this skeleton are worth emphasizing:
- Workspace isolation plus cleanup in
finally: tasks do not contaminate one another, and results are reproducible; - Hard cost cap and timeout: prevents a single runaway task from disrupting the whole evaluation batch;
- Separate calculation of
passedandcompletion: prevents “completion” from masking the fact that the result is not deliverable.
6. Enterprise Selection Advice: Choose by Task Profile, Not Leaderboard Rank
Before selecting an agent, teams should first define a “task profile”:
- Task type: is the workload mostly new applications or modifications to existing codebases?
- Batch scale: are you running dozens of tasks at once, or only a few key requirements per week?
- Time constraints: can tasks run overnight if needed?
- Verification capability: is there a stable automated test and static-analysis system?
- Data compliance: can code leave the internal network, or is private deployment required?
Based on this, teams can apply the following decision logic:
- Migration, refactoring, and legacy-system transformation as the main workload: prioritize pass rate and completion; long runtimes may be acceptable, with the focus on reducing manual rework;
- Batch small tasks with sensitive budgets: prioritize unit cost and throughput, using tiered routing such as “low-tier tasks go to lower-cost schemes, high-tier tasks go to higher-quality schemes”;
- Highly regulated scenarios: first confirm the deployment model and data boundaries, then compare scores;
- Any scenario: retain human review, especially for high-risk changes involving permissions, payments, or data deletion.
It is also important to note that the cost of a single benchmark run includes the full evaluation process and is not equivalent to the cost of a single task in actual team usage. Real cost is also affected by prompt length, context compression strategy, retry count, cache hits, and concurrency. Before deployment, teams should validate the cost on a small scale using their own real tasks.
7. Common Mistakes and Risk Avoidance
Mistake 1: Looking only at pass-rate ranking. A few percentage points of pass-rate difference may correspond to several times the cost difference, so cost per pass-rate point must be considered together.
Mistake 2: Treating completion as delivery capability. Completion is a process metric. High completion does not mean deliverability. The gap between completion and pass rate should be used to judge whether there are systemic defects.
Mistake 3: Ignoring the compounding cost and time of evaluation itself. If an evaluation takes tens of hours and costs hundreds of dollars, teams will find it difficult to include it in daily iteration. In contrast, low-cost schemes make it easier to “evaluate after every change.”
Mistake 4: Ignoring security and compliance risks. Long-horizon agents usually have file read/write and command execution permissions, making the risk surface significantly larger than code completion. Recommended practices include:
- Run agents in isolated containers or dedicated sandboxes, and prohibit access to production credentials;
- Set an outbound network allowlist to prevent dependency packages from being replaced or poisoned;
- Perform license scanning and security scanning on generated code, focusing on hard-coded keys, insecure deserialization, and overly privileged interfaces;
- Keep audit logs and version snapshots so that any change can be traced and rolled back;
- Clarify the responsibility boundary of “agent submission — automated checks — human review,” and do not allow automated workflows to merge directly into the main branch.
Mistake 5: Treating public leaderboards as the only basis. Public tasks may differ greatly from internal business work in task distribution and judging strictness. Building a small internal task set for calibration is often more valuable than chasing rankings.
8. Action Checklist for Teams
- Build a task set: extract 20 to 30 tasks from historical requirements, organize them by difficulty, and provide automated acceptance scripts;
- Define metric definitions: clarify whether cost includes retries, whether elapsed time includes environment preparation, and how completion is weighted;
- Set up an isolated environment: run in containers, restrict network and credentials, connect monitoring, alerting, and logging services, and make cost, runtime, and failure causes observable;
- Run multiple rounds and analyze distributions: repeat each task 3 to 5 times and report the mean and P90 to avoid conclusions based on chance;
- Calculate unit cost: use two ratios for horizontal comparison — “cost per pass-rate point” and “pass-rate points per hour”;
- Establish tiered routing: route low-tier tasks to low-cost schemes and high-tier tasks to high-quality schemes, and validate the strategy through small-scale canary testing;
- Review periodically: rotate the task set quarterly to prevent models and frameworks from “overfitting” to the evaluation.
9. Conclusion
At first glance, the public benchmark results are only a few percentage points of difference in pass rate. In fact, they reveal the capability structure of AI coding in long-horizon engineering tasks: pass rate represents deliverability, completion represents process quality, and runtime and cost represent the capacity for sustainable investment. High completion accompanied by long runtime shows that there is a real tension between “doing more thoroughly” and “doing more economically.” The value of evaluation is to quantify this tension so that teams can make tradeoffs based on their own task profiles. For most organizations, the pragmatic path is not to chase the top of the leaderboard, but to build a trustworthy, reproducible, and sustainable low-cost evaluation mechanism, while keeping AI-generated artifacts under the combined constraints of version control, automated checks, and human review.
