How to Scientifically Evaluate LLM Code Generation and Multimodal Creative Capabilities
In a crowded model-release cycle, vendor benchmarks are difficult to trust and older evaluation conclusions may no longer apply. This article presents a reproducible evaluation framework built around code generation and programmatic visual creation. It covers test-case design principles, a dynamic SVG regression test, a pure-code realistic lighting comparison, and practical ways to build a layered private evaluation suite that records the process and validates outputs end to end.
How to Scientifically Evaluate LLM Code Generation and Multimodal Creative Capabilities
Introduction: The Evaluation Challenge in an Era of Dense Model Releases
Recently, several leading vendors have released new-generation flagship models in quick succession. Parameter counts, benchmark scores, and training details are often vague, and official announcements tend to rely on broad claims such as “enhanced world knowledge, multimodal perception, coding, and agentic capabilities.” For developers, this information is rarely enough to guide model selection.
More importantly, the new generation of models generally involves adjustments to underlying architecture, which means evaluation conclusions and experience from older versions may no longer apply. Vendors also tend to release models in the same window, making horizontal comparison more urgent—yet the credibility of public benchmark scores is being diluted by growing concerns about benchmark gaming.
Rather than relying on official marketing, it is more useful to design a set of evaluation cases close to real usage scenarios and judge models by their actual outputs. This article uses “code generation + programmatic visual creation” as an entry point, introduces a reproducible evaluation approach, and discusses how to interpret results through typical test cases.
1. Basic Principles of Evaluation Design
1. Choose Cases with a Known Floor and an Open Ceiling
A good evaluation case should have two characteristics:
- Known floor: most modern models can produce a “presentable” result, making it easy to quickly filter out clearly unqualified candidates.
- Open ceiling: there is a clear quality gradient between excellent and ordinary results, which can reveal differences between models.
“Generate an animated SVG” is a typical case with a known floor—after several rounds of model iteration, almost all mainstream models can produce a runnable result. “Draw a realistic light-and-shadow scene using pure code” is a case with an open ceiling, because it tests the model’s understanding of physical lighting, materials, and composition, as well as its engineering implementation ability.
2. Keep Prompts Neutral and Do Not Preset a Technical Route
Evaluation prompts should describe only the target effect, not the implementation method. For example:
Use any code technique you know to draw a picture of interwoven light and shadow,highlighting the quiet afternoon atmosphere of light and shadow. Strive for perfection and pursue the extreme.
Not specifying a language or rendering method is intended to observe the model’s own “technical decision-making ability”—whether it chooses Canvas, SVG, WebGL, or an offline path-tracing approach is itself part of its capability profile. A model’s judgment about technical routes often reflects its depth of knowledge more than a single result does.
3. Results Should Be Reproducible and Verifiable
Animation outputs should run independently in an offline, single-file environment without external resources. Rendering outputs should be reproducible by rerunning the code. Any result that depends on an external CDN, requires a specific account login, or cannot be verified again after output should be noted in the evaluation record to avoid the misjudgment of “looks good but cannot be deployed.”
2. Case 1: Dynamic SVG Generation Capability Test
Test Design
A classic case is “generate an animated SVG of a pelican riding a bicycle.” This task has become a de facto community standard because it tests several things at once:
- Correctness of SVG syntax (grouping, paths, transforms);
- Animation mechanisms (SMIL or timing control through inline scripts);
- Scene organization ability (layering of subject, background, and decorative elements);
- Interaction capability (whether pause, speed adjustment, theme switching, and similar controls are supported).
Result Interpretation Framework
In this actual test, the new-generation flagship model under evaluation delivered a fairly complete result: the main subject was a pelican wearing a red hat riding along the seaside, the wheels kept turning, the scarf fluttered backward, and the output also provided a pause button, pedaling speed adjustment, and day/night mode switching. After setting the speed to 1.75x and exporting a single-file SVG, the animation still ran normally in an offline environment—showing that all logic was implemented with inline scripts and had no external dependencies.
From this result, several evaluation dimensions can be extracted for readers to apply in their own tests:
| Dimension | What to Observe |
|---|---|
| Correctness | Whether the animation is smooth, whether elements are misaligned, whether scripts report errors |
| Completeness | Whether all semantic elements in the prompt are covered |
| Engineering quality | Whether the output is self-contained, exportable, and runnable offline |
| Value-added capability | Whether the model proactively provides interactive controls and parameterized configuration |
It is worth noting that tasks such as “pelican riding a bicycle” have circulated in the community for years and have entered training corpora in large quantities. A model’s good performance may therefore include a considerable “memorization component.” Such tasks are better suited as regression tests (confirming that the model has not regressed) than as discrimination tests (measuring the real gap between models).
3. Case 2: Drawing Realistic Light and Shadow with Pure Code
Test Background
A recent benchmark case circulating in the community involved a developer using a frontier model to generate a path-tracing renderer written in C++, which rendered an “afternoon room” scene in about three hours—window-frame shadows swept across the wall, a chair, and a parquet wood floor, with an overall look close to a real photograph. This case attracted attention because path tracing involves ray intersection, BRDF material models, Monte Carlo sampling, denoising, and a series of graphics knowledge areas. The model needed to write a largely correct complete implementation in one pass rather than calling an existing library.
Comparative Test and Result Analysis
Using the same prompt to test a new-generation flagship model from a Chinese provider, the model chose a different technical route: a real-time room scene built in the browser based on WebGL, with an accompanying CPU rendering implementation.
From the result, the treatment of light slanting into the room through the window frame was noteworthy—the light beam passed over a round stool and extended to the lower edge of the image, with direction and attenuation basically reasonable. But the problems were also obvious:
- Distorted hard shadow boundaries: several overly black and overly hard lines appeared at wall corners, indicating that shadow calculation lacked penumbra transitions. It may have performed only simple occlusion checks without area-light integration.
- Thin material representation: the textures of the potted plant and floor looked like “a freshly assembled set,” lacking details beyond diffuse reflection, such as texture, roughness variation, and approximations of subsurface scattering.
- Inconsistent overall lighting: the transition from the bright area near the window to the darker interior was not natural enough, lacking indirect bounce light from global illumination—precisely the strength of path-tracing solutions.
Technical Conclusions Drawn from the Comparison
This comparison reveals more than “who draws a better-looking picture”; it shows capability differences behind technical route choices:
- Real-time rendering route (WebGL/rasterization) has a low barrier and quick results, and is suitable for interactive animation. But adding soft shadows, global illumination, and complex materials within a single pass of code generation places extremely high demands on a model’s graphics engineering accumulation.
- Offline rendering route (path tracing) has a natural advantage in physical correctness, but requires the model to write thousands of lines of structurally correct numerical computation code and to accept longer rendering times.
In the current tests, a model that can proactively choose and successfully deliver a complete path tracer is indeed ahead by a noticeable margin in code capability. Models that choose the WebGL route may deliver runnable work, but on the ceiling-type task of “using code to approach photo-level realism,” there is still a visible gap from the most advanced level. The output quality of multiple international flagship models on the same task also confirms this—the leading group’s advantage in pure-code graphics tasks is systemic, not a matter of isolated cases.
4. How to Build Your Own Model Evaluation System
1. Establish a Layered Case Library
It is recommended to divide cases into three layers:
- Regression layer: classic community tasks (such as the pelican riding a bicycle) to verify that basic capabilities have not degraded;
- Application layer: real needs close to your own business, such as generating form validation logic, writing data-cleaning scripts, or producing visualization charts;
- Ceiling layer: deliberately increased difficulty, such as “generate a finite state machine with test cases without writing comments” or “implement a visual work in a specified style using pure code,” used to distinguish top models.
2. Record the Process, Not Just the Result
Evaluation records should include the full prompt, model version and time, generation time, first-pass success rate, and the number and types of manual corrections required. A single “impressive output” has no statistical significance; the same prompt should be run at least 3–5 times, and overall performance should be assessed.
3. Conduct End-to-End Validation in an Engineering Environment
Code-generation capability ultimately needs to be tested in a real development workflow. Intelligent programming assistance tools can place model-generated code directly into project context so that you can observe the model’s understanding of existing code style and dependency constraints—this is a completely different capability from “writing a standalone demo in an empty chat box.” For enterprise users, a continuous evaluation pipeline can also be built on the general inference, logging, and monitoring capabilities provided by a cloud-based LLM platform, turning “rerun the full set of cases after a model upgrade” into an automated action rather than a one-off manual experience.
5. Conclusion: Taking “Catching Up and Gaps” Rationally
Across multiple rounds of testing, the new-generation flagship model from a Chinese provider has reached mainstream standards in interactive animation and engineering completeness, and in some scenarios even showed greater initiative than expected (such as proactively providing interactive controls). However, on high-difficulty pure-code creation tasks represented by path tracing, there is still a perceptible gap from the most advanced international models. This gap is reflected more in the engineering integration of deep knowledge such as graphics and numerical computation than in syntax or framework familiarity.
For developers, this means two things. First, do not draw conclusions from a single demo; building a layered, reproducible private evaluation set is the reliable basis. Second, models iterate very quickly, and today’s “obvious gap” may be closed in the next version, so the evaluation system itself should continue to evolve. Speaking with data and verifying through reproduction is the fundamental way to make sound technology choices in an era of dense model releases.
