LLM Evaluation Beyond Fluency: Visual Generation, Reinforcement Learning, and Multi-Round Search

    This article examines how large language models perform on tasks that go beyond fluent text generation, including visual page generation, interactive 3D scenes, maze-based reinforcement learning, and multi-round search. It identifies common failure modes such as style requirements not being reflected in output, spatial logic errors, mismatches between rendering and action layers, incomplete interaction wiring, poorly explained RL parameters, and search results that do not match the requested number of rounds or lack verification. The article also proposes a four-dimensional evaluation framework and a layered acceptance approach so that subjective impressions can be turned into comparable, reproducible engineering metrics.

    As large language models move from text-based question answering toward code generation, agent execution, and complex information retrieval, judging model capability only by whether the answer “sounds fluent” is no longer sufficient. A model may generate complete page code without ensuring that the interface is usable. It may describe a detailed reasoning process without actually completing the corresponding search or verification. LLM evaluation therefore needs to distinguish between expression capability and task completion capability.

    This article analyzes representative test tasks covering visual generation, interaction logic, reinforcement learning, and multi-round search, and summarizes the common issues exposed by these tasks.

    1. Visual Output Can Look Good Without Meeting the Design Goal

    In web visual generation tasks, models can usually produce pages with gradient backgrounds, lighting effects, particles, cards, and animations. For ordinary presentation pages, these elements can significantly improve first impressions and show that the model has learned a substantial part of front-end visual expression patterns.

    However, a visual result that “looks right” does not mean the requirement has been fulfilled. For example, when a task asks for a specific artistic style, the model may explicitly mention ink wash, paper texture, or traditional painting elements in its reasoning text, while the final page still uses conventional dark gradients and particle animations. A clear gap appears between the model’s language description and its actual output.

    This issue is not fundamentally a front-end syntax error. It is a failure in requirement mapping. The model can recognize keywords but does not translate them into verifiable visual features. A page that truly matches an ink-wash style should at least reflect differences in the following areas:

    1. The background should include rice paper, fiber, or low-contrast textures.
    2. Graphic edges should avoid excessive sharpness and may use brush strokes with a natural sense of diffusion.
    3. Colors should focus on ink tones, grayscale, and a small number of accent colors.
    4. Animation pacing should not be too fast, and the design should not rely entirely on neon effects.
    5. Text, whitespace, and composition should reflect the density relationships found in traditional visual design.

    Therefore, evaluating visual generation capability should not rely only on whether a screenshot looks “beautiful.” It should also check whether the model has implemented the user’s specified style constraints. A more reliable approach is to build a requirement checklist and verify color, layout, motion, materials, and interaction behavior item by item.

    2. Interactive 3D Tasks: Running Does Not Mean the Logic Is Correct

    In bowling or similar interactive scenes based on 3D graphics libraries, models can usually generate scenes, cameras, lighting, spheres, targets, and collision detection code. On the surface, the page loads and objects can move, so the task appears complete.

    Further testing, however, may reveal unreasonable spatial relationships. For example, the gaps between targets may be too large for the sphere to achieve the expected effect through a reasonable collision. Camera angles and lighting settings may also prevent users from seeing the target area clearly. These issues show that the model has only completed “object stacking” without building a complete physical and interaction model.

    For 3D tasks, at least the following layers should be verified together:

    • Geometry: whether object sizes, positions, and spacing match real proportions;
    • Physics: whether collision bodies are consistent with the visual models;
    • Operation: whether user input can stably control objects;
    • Camera: whether key areas remain visible;
    • Feedback: whether collisions, scores, and failure states provide clear prompts;
    • Performance: whether the animation loop contains unnecessary computation and memory overhead.

    It is especially important to note that models often generate numbers that “look reasonable” without actual verification. Developers can add debugging aids to the code, such as displaying collision boundaries, coordinate axes, and object bounding boxes, so that mismatches between visual positions and logical positions can be found quickly.

    Interface visibility is also an important metric. Black backgrounds, dark text, low-contrast buttons, and missing state prompts can make a technically runnable page difficult to use. Acceptance criteria for front-end generation tasks should include both functional correctness and usability, rather than checking only whether the console reports errors.

    3. Mazes and Reinforcement Learning: Complex Tasks Expose Model Weaknesses Most Clearly

    Reinforcement learning tasks in a maze test a model’s overall capability more effectively than static pages because they involve map generation, state representation, action execution, reward design, training loops, and result presentation at the same time. A deviation in any layer can prevent the entire task from running.

    Common issues in actual generation include the following:

    First, the rendering layer and the logic layer may be inconsistent. The model may draw maze walls in one coordinate system but use another coordinate system to determine agent movement. Even if the screen looks normal, the agent may pass through walls, get stuck inside a wall, or visually move outside the corridors.

    Second, scene dimensions may lack constraints. A map that is too large, cells that are too wide, or an unreasonable character size can cause the main subject to obscure the maze, making it impossible for users to observe the training process.

    Third, the interaction entry points may be incomplete. The model can generate a training function without correctly binding the start button, pause button, or reset logic. The result is a page that displays but cannot actually execute.

    Fourth, reinforcement learning parameters may lack explanation. If the learning rate, discount factor, exploration probability, and reward values are filled in arbitrarily, training may converge too slowly, oscillate, or fall into local optima.

    Fifth, training results may lack verifiability. A page showing “training complete” does not mean the policy is effective. Further checks should confirm whether the agent can reliably reach the goal from the starting point and maintain similar performance across multiple runs.

    For such tasks, a better engineering implementation should use a unified data model. For example, a two-dimensional array can first represent the maze, and the same data can then generate walls, floors, start points, end points, and collision areas. Rendering logic and action logic should not each maintain a separate map, because misalignment becomes very likely.

    The reinforcement learning section should also clearly record cumulative reward, step count, and success rate for each training round. Even if the final page is only for demonstration, users should be able to see whether training actually occurred rather than relying on a paragraph of explanatory text.

    Test results show that some models have made slight progress in visual presentation and training convergence, but across multiple generations they may still produce missing maps, failure to start, or misalignment between the action layer and the terrain layer. This indicates that the model has some code organization capability but has not yet developed stable end-to-end debugging capability.

    4. Multi-Round Search: Count, Content, and Truthfulness Must Be Evaluated Separately

    Multi-round search is another area prone to misjudgment. When a user asks the model to perform several rounds of retrieval, it is not enough to check whether multiple sources appear in the final answer. It is also necessary to confirm whether the model actually completed the requested number of searches and whether each round introduced new information.

    Common issues include:

    1. Performing only one search while repeatedly describing the same batch of content in the final answer;
    2. Returning a number of searches that does not match the user’s request;
    3. Changing only keywords across multiple rounds without adding factual verification;
    4. Failing to cross-validate conflicting information from different sources;
    5. Mixing information that does not exist in the search results into the final conclusion;
    6. Presenting speculation as confirmed fact.

    The most dangerous errors involve configuration, parameters, and specifications. These errors are often not obvious common-sense mistakes; instead, they look professional and are difficult for users without domain knowledge to detect immediately. Once users rely on incorrect information for purchasing, selection, or technical decisions, the impact is amplified.

    A more reliable search process should include the following steps:

    • Define the scope of the question and the key fields;
    • Use the first search to build a candidate information set;
    • Use subsequent searches to independently verify key fields;
    • Compare conclusions from different sources;
    • Separate confirmed information, disputed information, and information that cannot be confirmed;
    • Label the scope of evidence and uncertainty in the final output.

    If the user explicitly requests four rounds of search, the system should also provide an observable execution record, such as showing the query topic, source count, and new conclusions obtained in each round. This not only makes review easier for users but also helps developers locate problems in the retrieval pipeline.

    5. Building a More Professional LLM Evaluation System

    Taken together, these tasks show that LLM evaluation should include at least four dimensions.

    The first is generation capability: whether the model can produce structurally complete text, code, or pages.

    The second is execution capability: whether the generated result can actually run, and whether buttons, animations, training processes, and search flows work effectively.

    The third is consistency: whether the reasoning process, execution process, and final conclusion correspond to one another, and whether the model claims to have done something that it did not actually do.

    The fourth is reliability: whether the model is sufficiently accurate on facts, parameters, and key constraints, and whether it can proactively state uncertainty.

    In practice, a layered acceptance method can be used:

    • Static inspection: review code structure, dependencies, and key parameters;
    • Runtime inspection: launch the page and operate the main flows;
    • Boundary inspection: test empty input, repeated clicks, abnormal data, and extreme parameters;
    • Result inspection: confirm whether the output meets the task goal;
    • Reproducibility inspection: repeat generation or execution and observe whether results are stable;
    • Manual review: independently verify key facts and high-risk conclusions.

    For enterprise developers, these checks can also be integrated into automated testing processes. For example, run build checks on generated pages, execute end-to-end tests for interactive tasks, establish key-field validation for search answers, and collect success rates and average step counts for reinforcement learning demos. In this way, a one-time subjective experience can be converted into comparable, reproducible engineering metrics.

    6. Conclusion: Progress Is Worth Acknowledging, but Stable Delivery Remains a Gap

    Overall, current large language models can complete fairly complex tasks, especially in page construction, visual expression, and basic code organization, where generation efficiency has improved noticeably. However, in tasks that require coordination across multiple modules, models still tend to produce local completion with overall failure.

    A model may generate a beautiful interface without implementing the specified style. It may create 3D objects without handling spatial relationships properly. It may write reinforcement learning code while allowing the rendering layer and action layer to misalign. It may output a multi-round search summary without actually completing the corresponding retrieval and verification.

    Therefore, when using large language models for development, the most important principle is not to trust generated results blindly but to establish a closed loop of “generate—run—verify—correct.” For visual tasks, verify whether requirements are implemented. For interactive tasks, verify whether behavior matches expectations. For algorithmic tasks, verify whether data, states, and results are consistent. For search tasks, verify whether sources, counts, and facts are reliable.

    Large language models are gradually moving from “code generators” toward “task execution assistants,” but there is still a clear gap before they can fully replace engineers. A truly efficient development approach is to let models rapidly produce drafts and explore options while developers define constraints, design verification standards, and review key results. Only in this way can the speed advantage of models be translated into stable, maintainable, and deliverable technical outcomes.