System-Level Optimization Practices for High-Performance Large Language Model Inference

    High-performance LLM inference depends on more than optimizing individual matrix multiplication or attention kernels. This article presents a system-level approach covering compile-time execution planning, persistent GPU execution, dynamic batching, KV cache management, multi-GPU topology, model–engine co-design, performance evaluation, and a phased engineering roadmap.

    1. From Operator Acceleration to System-Level Optimization

    Large language model inference performance is not determined solely by the peak performance of an individual matrix multiplication or attention operator. In production services, requests arrive in bursts, input and output lengths vary significantly, and the decoding stage repeatedly accesses the KV cache. As a result, end-to-end latency is affected by computation, memory access, scheduling, communication, and resource management at the same time.

    Traditional optimization often focuses on a single operator, such as tuning thread-block dimensions, using lower-precision data formats, or improving shared-memory access. These techniques can improve local performance, but their overall benefits may be offset by kernel-switching overhead, repeated temporary tensor allocation, and inefficient request batching.

    A high-performance inference system therefore needs a cross-layer optimization strategy that includes at least three levels:

    1. Inference engine layer: Compiles the computation graph, fuses operators, generates execution plans, and reuses memory.
    2. Scheduling layer: Handles request queues, dynamic batching, request merging, priority management, and KV cache scheduling.
    3. Low-level execution layer: Manages GPU kernels, thread organization, multi-GPU communication, memory access, and device-topology awareness.

    Only when these layers share execution information can the system optimize the complete path from model structure to hardware execution.

    2. Compile-Time Planning and Persistent Execution

    When the model structure is relatively stable and the serving pattern is well defined, some runtime decisions can be moved to the compilation stage. The compiler first analyzes graph dependencies, tensor lifetimes, memory requirements, and parallelization patterns, then generates a relatively fixed execution plan.

    The main benefits include:

    • Determining operator execution order in advance;
    • Fusing computation stages that can run consecutively;
    • Reusing GPU memory regions whose lifetimes do not overlap;
    • Reducing the number of intermediate tensors written back to device memory;
    • Grouping multiple fine-grained operations into larger execution units.

    A persistent GPU execution engine can extend this approach. Instead of launching many independent kernels for every generated token, the engine remains resident on the device for an extended period and continuously processes request states, batch changes, and decoding tasks.

    Persistent execution does not require all requests to have exactly the same length. Instead, it uses device-side state management and predefined execution paths to reduce frequent kernel-launch overhead. This is particularly important for autoregressive generation, where each decoding step contains computational patterns that are largely similar. If the host must relaunch tasks for every step, launch latency accumulates throughout long sequences.

    Static planning must still accommodate dynamic inputs. A practical approach is to divide execution into stable and variable components. The compiler generates a fixed plan for the stable portion, while the variable portion is controlled through device-side parameters, masks, index tables, or branches within a limited range. This preserves the efficiency of static execution while supporting different request lengths.

    3. Dynamic Batching and Request Merging

    Online LLM inference generally handles two types of work: a compute-intensive input-processing stage and an autoregressive, token-by-token decoding stage. These stages differ substantially in computational scale, memory-access behavior, and latency requirements, so they should not use exactly the same batching strategy.

    Dynamic batching does not wait for a fixed batch size to be filled. Instead, within the required latency constraints, the scheduler continuously combines requests that are at similar execution stages. It should consider:

    • Request waiting time;
    • Sequence lengths in the current batch;
    • Available device memory;
    • KV cache usage;
    • Estimated computation;
    • User-defined priorities;
    • Time-to-first-token and sustained-generation targets.

    For input processing, increasing the batch size appropriately can improve matrix-computation efficiency. During decoding, however, an excessively large batch may increase memory-access overhead and scheduling latency. A practical design is stage-aware scheduling: input-processing tasks handle larger-scale computation, while decoding tasks advance through continuous batching so that new requests can join an existing batch while it is running.

    Request merging must also account for sequence-length differences. If short and extremely long sequences are forced into the same batch, considerable computation may be wasted. The scheduler can group requests by length range, execution stage, or estimated remaining steps to balance throughput and fairness.

    4. KV Cache Management Is Critical for Low-Latency Inference

    During autoregressive generation, the model repeatedly uses the keys and values associated with previously processed tokens. Recomputing the historical context at every step would cause the computational cost to grow rapidly. Inference engines therefore store these intermediate results in a KV cache.

    The KV cache provides a substantial speedup but also creates significant memory pressure. Its footprint depends on the number of layers, attention-head dimensions, data precision, sequence length, and number of concurrent requests. Under high concurrency, cache management can become one of the main limits on throughput.

    A complete KV cache management system typically needs the following capabilities:

    1. Paged or block-based allocation: Divide the cache into fixed-size physical blocks instead of reserving a large contiguous memory region for each request.
    2. Dynamic reclamation: Release cache blocks promptly when a request completes, is canceled, or times out.
    3. Prefix reuse: Reuse existing cache entries for requests with identical prefixes while preserving correctness.
    4. Hot–cold tiering: Keep frequently accessed content in high-speed device memory and move temporarily inactive content to other storage tiers.
    5. Fragmentation control: Reduce memory fragmentation through uniform block sizes, free-block management, and periodic compaction.

    KV cache scheduling cannot be designed independently of batching. When admitting a new request, the scheduler must determine whether both compute and cache resources are sufficient. In multi-GPU environments, it must also consider the transfer cost between the device holding the cache and the device performing subsequent computation.

    5. From Warp Cooperation to Multi-GPU Topology

    Within a single GPU, execution efficiency can be improved through warp-level task division, asynchronous loading, and overlap between computation and memory access. The same cooperation principle can be extended to multi-GPU systems, where different devices handle different model stages, data shards, or communication tasks. Pipeline execution can then reduce idle time.

    The goal of multi-GPU optimization is not simply to add more devices, but to align task placement with the hardware topology. The scheduler needs information about inter-device bandwidth, communication latency, memory capacity, and the computational load of each stage. It can then determine:

    • Which layers or expert modules should be placed on each device;
    • Which data should be replicated and which should be sharded;
    • How communication and computation can overlap;
    • How the KV cache should be accessed across devices;
    • How to rebalance work when load distribution becomes uneven.

    For models with sparse expert architectures, expert placement can be balanced according to access frequency so that a small number of hot experts do not become system bottlenecks. Lower-precision computation can reduce memory-bandwidth and storage requirements, but it must be combined with appropriate accumulation precision, quantization-error control, and kernel implementations. Reducing bit width alone is not sufficient.

    6. Co-Designing the Model and Inference Engine

    General-purpose inference engines must support many model architectures. For a specific model, however, considering hardware execution characteristics during model design can provide a higher performance ceiling.

    Model–engine co-design mainly involves three areas:

    • Reducing irregular data access in the model architecture;
    • Aligning the decoding path with the engine’s batching strategy;
    • Providing hardware-specific implementations for critical computation modules.

    For example, a model can use tensor layouts that are better suited to block-based computation and thereby reduce data-reorganization overhead. It can also reduce actual execution volume through sparsity, low-precision expert computation, or speculative decoding. The inference engine must provide stable compilation paths, memory planning, and efficient kernels for these structures.

    This cooperation does not mean writing large amounts of unmaintainable special-case code for a single model. A more sustainable approach is to abstract reusable capabilities, such as configurable execution graphs, composable computation templates, unified cache interfaces, and extensible scheduling policies. This makes it possible to achieve model-specific optimization benefits while preserving maintainability.

    7. Performance Evaluation Must Go Beyond Generation Speed

    Inference performance should be evaluated across multiple metrics rather than only average output-token speed. At minimum, teams should monitor:

    • Time to first token;
    • Per-request latency during continuous generation;
    • Throughput at different concurrency levels;
    • P50, P95, and P99 latency;
    • GPU compute utilization;
    • Device-memory usage and KV cache hit rate;
    • The proportion of time spent on multi-GPU communication;
    • Request cancellation and failure-recovery time.

    Tests should cover short and long inputs, short and long outputs, burst traffic, and mixed workloads. An optimization is valuable only when it remains stable under realistic workloads.

    The system should also provide observability, including request-level tracing, stage-level timing, kernel execution analysis, cache-allocation records, and device-communication monitoring. These signals help determine whether a bottleneck comes from computation, memory access, scheduling, or communication, preventing ineffective optimization based only on intuition.

    8. Engineering Roadmap

    A high-performance inference engine can be developed incrementally:

    Phase 1: Establish a reliable baseline and comprehensive monitoring. Define baseline metrics for time to first token, sustained generation speed, memory usage, and related indicators.

    Phase 2: Optimize operator fusion, memory reuse, and low-precision computation. Address the most visible local bottlenecks first.

    Phase 3: Introduce dynamic batching, paged KV caching, and asynchronous scheduling to improve resource utilization under high concurrency.

    Phase 4: Build compile-time static planning and persistent execution to reduce host-side scheduling and kernel-launch overhead.

    Phase 5: Optimize jointly for multi-GPU topology and specific model structures, then use continuous stress testing to verify that the gains remain stable.

    Overall, high-performance inference is not achieved through one isolated technique. It requires a broader redesign of the execution model. Treating model architecture, the compiler, scheduler, cache system, and GPU hardware as one integrated system provides a stronger foundation for balancing low latency, high throughput, and efficient resource utilization.