How to Calculate the Real Cost of AI Coding Subscription Plans

    AI coding subscription plans can look cheaper than pay-as-you-go APIs because the monthly fee is fixed and easy to budget. However, a low monthly price does not automatically mean a low cost per token. The real cost depends on how fast you consume quota, whether your usage falls into peak-time windows, and whether the pay-as-you-go comparison uses the right cache and token assumptions. This article provides a practical framework for converting AI coding subscription quotas into an effective cost per million tokens, using illustrative plans, Python examples, decision rules, and optimization practices. All prices and quotas in the article are illustrative and should be replaced with your provider’s official pricing and your own measured usage.

    1. Introduction: Subscription plans look cheap, but the real cost needs calculation

    In recent years, AI-assisted programming has evolved from simple code completion and single-turn question answering into coding agents that can read repositories, call tools across multiple turns, and modify files continuously. As generative model usage grows, billing models have also diverged:

    • Pay-as-you-go pricing, where you pay for the actual input and output tokens consumed.
    • Subscription plans, where you pay a fixed monthly fee and receive a weekly or monthly token quota, usually designed around coding workloads.

    The biggest appeal of subscription plans is predictable cost. Once the monthly fee is fixed, it is easier to avoid unexpected bills. However, “low monthly fee” does not equal “low effective unit cost.” Whether a plan is worthwhile depends on three conditions:

    1. Can your consumption keep up with the quota?
      If the quota is not fully used, the effective price per token rises.

    2. Is your usage shifted away from peak windows?
      Tokens consumed during peak hours may be folded at a heavier rate.

    3. Is the pay-as-you-go comparison baseline correct?
      For the same token volume, the pay-as-you-go cost can vary by several times depending on cache hit rate.

    These three conditions point to one core question: how should tokens be measured? This article provides a practical analytical framework. It uses a set of illustrative plan parameters to convert “monthly fee” into “cost per million tokens,” and then compares plans on the same basis.

    All prices and quotas in this article are illustrative assumptions used to demonstrate the calculation method. They do not represent any vendor’s actual pricing or official plan rules.

    2. Clarifying the billing basis: tokens are not a 1:1 comparison

    2.1 Input and output tokens are priced separately

    When calling a model service, billing is usually based on two types of tokens:

    • Input tokens: system prompts, project context, code snippets, conversation history, tool results, and similar content.
    • Output tokens: generated code, explanatory text, tool-call arguments, and similar content.

    A common industry practice is that output tokens are priced higher than input tokens. Coding models often have a relatively high proportion of output tokens. If you estimate cost only by “total tokens,” you may easily underestimate the real cost.

    2.2 Cache hits amplify the effective capacity of tokens

    The core idea of prompt caching is to reuse intermediate computation results for request prefixes that are exactly the same, such as system prompts or long-term project context. When a later request hits the cache, that prefix does not need to be recomputed; only the newly added content needs processing.

    A common billing breakdown includes three token categories:

    • Input tokens that hit the cache: usually the largest in volume, but much cheaper per unit than uncached input.
    • Input tokens that miss the cache: usually the most expensive input category.
    • Output tokens: usually billed at a higher price.

    The exact billing method and prices vary by provider. Always refer to the official documentation of the model service.

    This mechanism directly affects the “real value” of a subscription quota. For example, assume a lightweight coding model has the following illustrative list prices, in CNY per million tokens:

    • Uncached input: 4
    • Cached input: 0.4
    • Output: 12

    If all input tokens miss the cache, 100 input tokens are relatively expensive. If the cache hit rate is 98%, the same 100 input tokens are much cheaper after cache weighting.

    In simplified terms, a high cache hit rate can amplify the effective capacity of the quota by several times. Therefore, a “weekly token quota” in a high-cache-hit-rate scenario should be understood as a cache-weighted processable token amount. It should not be directly equated with the raw token count used in pay-as-you-go pricing.

    2.3 Peak hours: time and quota are not equivalent

    Many subscription plans divide usage into peak and off-peak windows. Peak hours usually correspond to periods when the provider’s overall load is higher. Token consumption during peak hours may be folded more heavily, and some plans may impose separate caps during peak hours.

    Therefore, a “weekly quota” is only a nominal capacity. How much you can actually use depends on when your usage occurs.

    For illustration, assume a coding subscription has three tiers with monthly fees of 118, 538, and 1078 CNY. Peak hours are Monday to Friday, 14:00–18:00. Under an assumed 98% cache hit rate, if all usage occurs off-peak, the tiers may support approximately 317 million, 1.9 billion, and 4.433 billion tokens per week. Converted to list-price pay-as-you-go terms, this may correspond to approximately 160, 955, and 2229 CNY per week.

    These figures represent an ideal condition: off-peak usage with a high cache hit rate. They are not the default real-world condition.

    3. Core method: convert subscription plans into comparable effective cost

    3.1 Three basic quantities

    • Nominal quota Q: the weekly or monthly token capacity claimed by the plan.
    • Folding factor f: the inverse of the ratio between peak and off-peak quota consumption, with f ≥ 1. For example, if one peak-hour usage unit consumes one quota unit and one off-peak usage unit consumes 1/f of a quota unit, then f = 2 means peak-hour consumption is folded at twice the off-peak rate.
    • Peak usage ratio p: the proportion of total quota consumed during peak hours.

    Assume a week has 168 hours, and peak hours last H hours. If usage intensity is evenly distributed across time, the baseline value of p is approximately:

    p ≈ H / 168

    From this, we can derive:

    • Effective weekly capacity:

    Q_eff = Q / [1 + (f − 1) · p]

    • Effective monthly capacity:

    Q_month = Q_eff × W

    where W = 30.4 / 7 ≈ 4.343, the average number of weeks in a month.

    • Effective unit price:

    C = P_month / Q_month

    where P_month is the monthly subscription fee.

    The effective unit price is the core metric of this article. It converts monthly fees, token quotas, and peak-hour folding into a single comparable metric: CNY per million tokens. Different tiers, different plans, and even pay-as-you-go pricing can then be compared using the same ruler.

    3.2 Converting the comparison baseline

    The pay-as-you-go comparison cost A represents the cost of processing the same token volume directly through pay-as-you-go pricing without using a subscription.

    Assume output tokens are approximately 2.4% of input tokens. Using the illustrative list prices and cache structure above:

    • At a 98% cache hit rate:

    C_base = 0.02 × 4 + 0.98 × 0.4 = 0.472 CNY per million input tokens

    If output tokens are included separately, the total pay-as-you-go cost is higher. However, for the main comparison in this article, the cache-weighted input reference is used to keep the focus on quota utilization. If your output ratio is high, you should add the output cost separately.

    • At a 90% cache hit rate:

    C_base = 0.10 × 4 + 0.90 × 0.4 + 0.024 × 12 ≈ 1.048 CNY per million input tokens

    • With caching disabled:

    C_base = 4 + 0.024 × 12 = 4.288 CNY per million input tokens

    From this, we can define:

    • Baseline cache hit rate:

    r_base = 98%

    • Cost multiplier:

    m(r) = C_base(r) / C_base(r_base)

    This multiplier can be used to convert subscription quota into an equivalent token amount under any cache hit rate:

    Q_r = Q / m(r)

    • Saving rate:

    S = 1 − C / A

    A should be calculated using the cache hit rate you can actually achieve in your own usage scenario, not the 98% rate advertised by the plan.

    3.3 Decision rules

    Task-cost back-calculation

    Record approximately 100 recent typical sessions and calculate the average task cost c from:

    • Input tokens
    • Output tokens
    • Whether input tokens hit the cache

    If:

    P_month ≤ k · Q_month · c

    where k is a quota utilization target, usually between 0.7 and 0.85, then the subscription plan is worth considering.

    k < 1 is used because quotas are often reset by cycle and may not roll over. Leaving a buffer helps avoid the situation where the quota is “just barely enough” and then becomes insufficient.

    Break-even utilization

    b = P_month / (Q_month · c)

    If your average monthly task cost is lower than b, the subscription cost is lower than pay-as-you-go pricing.

    3.4 Python example

    1. WEEKS_PER_MONTH = 30.4 / 7 # Average number of weeks per month
    2. # Illustrative parameters: off-peak weekly token quota and official list-price equivalent (CNY/week)
    3. PLANS = {
    4. "Light": {"fee": 118, "quota": 3.17e8, "list_price": 160},
    5. "Standard": {"fee": 538, "quota": 19.0e8, "list_price": 955},
    6. "Heavy": {"fee": 1078, "quota": 44.33e8, "list_price": 2229},
    7. }
    8. def effective_price(fee, quota, peak_ratio=0.0, peak_factor=2.0):
    9. """Calculate the effective price per million tokens (CNY/million tokens)."""
    10. eff = quota / (1 + (peak_factor - 1) * peak_ratio) * WEEKS_PER_MONTH
    11. return fee / (eff / 1e6)
    12. def cache_equivalent_price(rate, p_in=4.0, p_cached=0.4, p_out=12.0, out_per_in=0.024):
    13. """Calculate the equivalent pay-as-you-go price at a given cache hit rate."""
    14. return 100 * ((1 - rate) * p_in + rate * p_cached) + out_per_in * 100 * p_out
    15. if __name__ == "__main__":
    16. peak_ratio = 20 / 168 # 20 peak hours per week, about 0.119 under even usage
    17. base = cache_equivalent_price(0.98)
    18. print(f"Baseline pay-as-you-go price: {base:.1f} CNY/million tokens\n")
    19. print(f"{'Tier':<8}{'Off-peak price':>14}{'List/Fee':>10}{'Actual price':>13}{'Saving':>9}")
    20. for name, p in PLANS.items():
    21. c0 = effective_price(p["fee"], p["quota"])
    22. c1 = effective_price(p["fee"], p["quota"], peak_ratio)
    23. saving = 1 - c1 / base
    24. print(f"{name:<8}{c0:>14.3f}{p['list_price'] / p['fee']:>10.2f}"
    25. f"{c1:>13.3f}{saving:>8.1%}")

    Under the illustrative assumptions of f = 2 and evenly distributed usage, the comparison can be summarized as follows:

    1. Baseline pay-as-you-go price: 47.2 CNY/million tokens
    2. Tier Off-peak price List/Fee Actual price Saving
    3. Light 0.371 1.36 0.422 9.1%
    4. Standard 0.325 1.77 0.364 22.8%
    5. Heavy 0.280 2.07 0.314 33.4%

    4. Interpreting the example: four key conclusions

    4.1 Higher tiers have lower marginal unit prices

    Under off-peak conditions, the effective unit prices of the three tiers are approximately 0.280, 0.325, and 0.371 CNY per million tokens. Higher tiers are cheaper per token. There are two main reasons:

    • Quota grows faster than price.
      The monthly fee increases from 118 to 1078 CNY, about 9.1 times. The weekly quota increases from 317 million to 4.433 billion tokens, about 14 times.

    • Fixed quota is amortized more effectively.
      The larger the fixed quota, the smaller the capacity loss caused by concentrated peak-hour usage. Even if the heavy tier’s peak usage ratio rises to 60%, its effective price may only rise to about 0.380 CNY per million tokens, still lower than the light tier’s off-peak price.

    4.2 Do not directly compare “weekly list price” with “monthly fee”

    If you directly divide the 118 CNY monthly fee by the 160 CNY weekly list-price equivalent, you may conclude that the plan is “a bit more than 70% of the original API price.” For the heavy tier, it may look like “less than half price.”

    However, the weekly quota refreshes every week, and a month contains about 4.343 such weeks. The correct comparison object is the monthly cost, which is the weekly list-price equivalent multiplied by 4.343. This gives approximately:

    • Light tier: 160 × 4.343 ≈ 695 CNY
    • Standard tier: 955 × 4.343 ≈ 4143 CNY
    • Heavy tier: 2229 × 4.343 ≈ 9677 CNY

    The key is to use a consistent time basis. When the comparison is normalized to monthly cost, the subscription plans can be substantially cheaper than the equivalent pay-as-you-go cost, but the exact saving depends on cache hit rate, peak usage, and output token share.

    4.3 Peak hours are a hidden discount

    Using the standard tier as an example, with the baseline cache hit rate unchanged, the effective unit price changes with the peak usage ratio p as follows:

    Peak usage ratio p Typical scenario Effective price (CNY/million tokens) Saving vs. pay-as-you-go
    0% Nighttime batch refactoring, CI pipelines 0.325 31.1%
    11.9% Even usage across time 0.364 22.8%
    30% Mostly daytime work hours 0.424 10.1%
    45% Intensive weekday daytime usage 0.471 0.2%
    48.2% Fully concentrated in peak hours 0.480 -1.7%

    Once the peak usage ratio exceeds about 48% for the standard tier, the subscription’s effective price becomes higher than pay-as-you-go pricing. The fixed fee cannot be amortized well, and usage coincides with the heaviest quota folding period.

    Different tiers have different break-even points. The heavy tier is more resistant to peak hours, with a break-even point of about 64%. The light tier is less resistant, with a break-even point of about 34%.

    4.4 Cache hit rate is a hidden lever, but it is not entirely under your control

    The standard tier’s effective price of 0.364 CNY per million tokens corresponds to a break-even cache hit rate of about 90.7%. Below this value, the subscription may not beat pay-as-you-go pricing.

    Every 10 percentage point drop in cache hit rate can reduce the subscription’s effective capacity by about 15%–20%. Therefore, a quota advertised under a 98% cache hit rate is only an upper bound. How much of it you can actually realize depends on how you construct requests.

    5. Practice: calculate your real cost from call records

    5.1 Step 1: collect metrics from call records

    Most model service responses include token usage for each call, including input, output, and cache hit information. The exact field names vary by provider. Recording these four types of data is the foundation of cost accounting:

    • Timestamp: used to distinguish peak and off-peak usage.
    • Input tokens: including cached input tokens.
    • Output tokens.
    • Session or project identifier: used to evaluate cache reuse potential.
    1. from dataclasses import dataclass, field
    2. from datetime import datetime, time, timedelta
    3. @dataclass
    4. class CallRecord:
    5. ts: datetime # Request time
    6. input_tokens: int # Total input tokens, including cached input
    7. output_tokens: int
    8. cached_input_tokens: int = 0 # Input tokens that hit the cache
    9. label: str = "" # Session or project identifier
    10. @dataclass
    11. class WeekStat:
    12. input_tokens: int = 0
    13. output_tokens: int = 0
    14. cached_tokens: int = 0
    15. peak_units: float = 0.0
    16. sessions: dict = field(default_factory=dict) # Cumulative input tokens per session
    17. PEAK_START, PEAK_END = time(14, 0), time(18, 0) # Illustrative peak window: 14:00-18:00
    18. def is_peak(ts: datetime) -> bool:
    19. return ts.weekday() < 5 and PEAK_START <= ts.time() < PEAK_END
    20. def fold(records, cache_rate_ref=0.98, cache_factor=2.0, peak_factor=2.0):
    21. """Aggregate weekly usage by cache weighting and peak folding."""
    22. st = WeekStat()
    23. for r in records:
    24. hit = min(r.cached_input_tokens, r.input_tokens)
    25. miss = r.input_tokens - hit
    26. units = miss + hit / cache_factor # Fold input into quota units
    27. st.peak_units += units * peak_factor if is_peak(r.ts) else units
    28. st.input_tokens += r.input_tokens
    29. st.output_tokens += r.output_tokens
    30. st.cached_tokens += hit
    31. st.sessions[r.label] = st.sessions.get(r.label, 0) + r.input_tokens
    32. hit_rate = st.cached_tokens / st.input_tokens if st.input_tokens else 0.0
    33. peak_ratio = st.peak_units * (1 - 1 / peak_factor)
    34. peak_ratio /= st.peak_units if st.peak_units else 1
    35. return {
    36. "cache_hit_rate": round(hit_rate, 4),
    37. "peak_ratio": round(peak_ratio, 4),
    38. "weekly_quota_units": round(st.peak_units),
    39. "weekly_output_ratio": round(st.output_tokens / max(st.input_tokens, 1), 4),
    40. "session_count": len(st.sessions),
    41. "average_session_input": int(sum(st.sessions.values()) / max(len(st.sessions), 1)),
    42. }
    43. def summarize(records, monday):
    44. """Summarize seven consecutive days of records starting from Monday."""
    45. end = monday + timedelta(days=7)
    46. return fold([r for r in records if monday <= r.ts < end])

    5.2 Step 2: observe continuously and calibrate coefficients

    Coefficients do not need to be guessed. They can be calibrated with data:

    • Peak factor f: compare quota consumption rates per unit time during peak and off-peak hours.
    • Cache folding factor: for input tokens in different cache hit rate ranges, compare actual quota consumption against raw token counts.

    You should also record:

    • The ratio of output tokens to input tokens.
    • The number of sessions.
    • The average length of each session.

    These are direct indicators of cache structure. It is recommended to collect data continuously for 2–4 weeks and use the median as the planning baseline.

    5.3 Step 3: apply the decision formula

    1. def recommend(stat, plans, k=0.8):
    2. """k is the quota utilization target (0.7-0.85); plans follow the format in Section 3.4."""
    3. ratio = stat["average_session_input"] / max(stat["weekly_quota_units"], 1)
    4. for name, p in plans.items():
    5. eff_w = p["quota"] / (1 + 0.0) # Official quota is assumed to be off-peak based
    6. margin = eff_w / max(stat["weekly_quota_units"], 1) # Quota margin multiple
    7. if ratio <= k:
    8. return name, margin, stat["weekly_quota_units"] * p["fee"]
    9. return "Pay-as-you-go recommended", 0.0, float("inf")
    10. # Illustrative example: a developer measures about 6.0e8 quota units per week
    11. stat = {"weekly_quota_units": int(6.0e8), "average_session_input": 6.2e4}
    12. name, margin, cost = recommend(stat, PLANS)
    13. print(f"Recommendation: {name} (quota margin about {margin:.2f}x), monthly cost about {cost:.0f} CNY")

    Under the illustrative data, the output is:

    1. Recommendation: Standard tier (quota margin about 1.32x), monthly cost about 538 CNY

    The light tier’s weekly quota is about 53% of the measured usage, below the 70% utilization target, so it may not be enough. The standard tier is about 3.17 times the measured usage, enough to cover fluctuations without the large idle capacity of the heavy tier.

    If the heavy tier costs about 9 times the light tier but provides about 14 times the quota, whether the extra quota is worthwhile depends on your actual task cost c. If the calculated break-even utilization b is higher than your actual usage ratio p, even if there is quota margin, a higher tier may not be necessary.

    6. Tier selection decision: a four-step method

    1. Measure usage.
      Collect 2–4 weeks of data following Sections 5.1 and 5.2. Obtain the median of weekly quota units, cache hit rate, and peak usage ratio.

    2. Define the scenario.
      Recalculate the comparison price A using your actual cache hit rate and peak usage ratio. In scenarios where calls occur only during continuous work hours and caching is hard to reuse, A may approach the uncached price, and the subscription advantage is largest. In scenarios with low cache hit rate and high output ratio, recalculate carefully.

    3. Calculate break-even.
      Use the formulas in Section 3.3 to calculate b and saving rate S for each tier. Keep only the tiers that satisfy:

    P_month ≤ k · Q_month · c

    1. Leave a margin.
      Among qualifying tiers, prefer the tier with a quota margin of about 1.2–1.5 times. This leaves room for demand growth and peak fluctuations.
    Usage intensity (weekly quota units) Light tier (317 million) Standard tier (1.9 billion) Heavy tier (4.433 billion)
    About 200 million 0.63x (possibly insufficient) 0.11x 0.05x
    About 400 million 1.26x (recommended) 0.21x 0.09x
    About 800 million 2.52x (somewhat wasteful) 0.42x 0.18x
    About 1.5 billion 4.74x (seriously wasteful) 1.27x (recommended) 0.34x
    About 3 billion 9.46x 2.52x 0.68x (possibly insufficient)
    About 4 billion — 3.37x (somewhat wasteful) 1.11x (recommended)

    The “multiple” in the table is the ratio of nominal quota to actual weekly usage. The values are illustrative.

    Two points should be emphasized:

    • Tier level also matters.
      Light, standard, and heavy tiers often differ significantly in both price and quota, and they may also correspond to different model capabilities. If a lower tier’s model cannot handle complex refactoring or cross-file modification, switching to a higher tier may increase token consumption per task. When comparing tiers, include the token usage impact caused by model capability differences.

    • The advertised quota is an upper bound.
      Official quotas are usually maximum values under ideal conditions. Actual usable capacity depends on how you call the service. Tier selection should be based on measured data and continuously calibrated using the method in Section 5.2.

    7. Optimization practices: make every unit of quota count

    7.1 Cache governance: keep prefixes stable and fork as late as possible

    Cache hit rate depends on the stability of request prefixes. Common practices include:

    • Put long-term stable content first, such as system prompts and project rules. Keep wording and order fixed.
    • Put volatile content later, such as timestamps and random identifiers.
    • Keep sessions as sequential as possible, and control the number of concurrent requests.
    • When splitting sessions, preserve the common prefix. The later the fork occurs, the more cache can be reused.
    1. def build_prefix(system_prompt, project_rules, repo_index):
    2. """Build a stable prefix. Once wording and order are fixed, avoid changing them."""
    3. return f"<system>\n{system_prompt.strip()}\n</system>\n<rules>\n{project_rules.strip()}\n</rules>\n<repo>\n{repo_index.strip()}\n</repo>\n"
    4. def build_turn(prefix, user_query, file_contents, ts):
    5. """Append volatile content only after the stable prefix in each turn."""
    6. files = "".join(f"<file path=\"{p}\">\n{c}\n</file>\n" for p, c in file_contents.items())
    7. return f"{prefix}<turn time=\"{ts}\">\n{files}{user_query}\n</turn>"

    7.2 Off-peak scheduling: move batch tasks out of peak hours

    Repository-level analysis, batch refactoring, and documentation generation usually have low real-time requirements. They can be scheduled at night or on weekends. If your orchestration framework supports queues, you can assign lower priority and concurrency limits to batch tasks during peak hours.

    1. import queue
    2. import threading
    3. PEAK_LIMIT, OFF_PEAK_LIMIT = 1, 4 # Illustrative concurrency limits
    4. class PeakAwareScheduler:
    5. """A simple scheduler that reduces concurrency during peak hours."""
    6. def __init__(self):
    7. self.tasks = queue.PriorityQueue()
    8. self.running = set()
    9. self.lock = threading.Lock()
    10. def submit(self, task, peak=False, priority=1):
    11. # Lower priority value means earlier execution. During peak hours, batch tasks are deprioritized.
    12. if peak and not getattr(task, "interactive", False):
    13. priority += 10
    14. self.tasks.put((priority, task))
    15. def run_once(self):
    16. with self.lock:
    17. limit = PEAK_LIMIT if getattr(self, "is_peak", lambda: False)() else OFF_PEAK_LIMIT
    18. if len(self.running) >= limit or self.tasks.empty():
    19. return
    20. _, task = self.tasks.get()
    21. self.running.add(task)
    22. task.execute()
    23. with self.lock:
    24. self.running.discard(task)

    7.3 Session and context strategy

    • Start a new session when appropriate.
      If the task goal changes significantly, do not keep reusing an old session. The longer the history, the more uncached input tokens accumulate.

    • Control retrieval scope.
      Limit files and line counts returned by tool retrieval or repository indexes. Avoid pulling irrelevant code into the context.

    • Use model tiering.
      Assign completion and simple Q&A to lightweight models. Assign complex refactoring to more capable models.

    • Compress history.
      In multi-turn tasks, periodically summarize previous turns. Use short summaries instead of accumulated raw logs.

    7.4 Monitoring and alerting: make cost measurable and predictable

    • Daily dashboard.
      Track peak usage ratio, cache hit rate, and weekly quota unit consumption over time.

    • Threshold alerts.
      Trigger reminders when weekly quota consumption reaches 70% or 85%.

    • Session-level attribution.
      Break down token consumption by project, session, and user to identify high-usage workloads.

    Model deployment and API calls can run on container platforms. With logging services to collect call records and monitoring systems to trigger alerts, teams can build a closed loop of usage, cost, and alerting. Cloud platforms generally provide common categories of cloud products for this purpose, making it easier to connect usage data with cost controls.

    8. Common mistakes checklist

    Mistake Consequence Correct approach
    Directly comparing monthly fee with weekly list price Underestimates subscription value or misjudges discount Convert to monthly cost by multiplying by 4.343
    Ignoring peak hours Actual usable quota may shrink by more than 20% Fold effective capacity using peak usage ratio p
    Planning with a 98% cache hit rate Quota looks larger than it is and may run out mid-month Use measured cache hit rate and leave a 1.2–1.5x margin
    Only looking at input tokens Underestimates pay-as-you-go cost Count output tokens separately at the higher price
    Ignoring high-output scenarios Cache amplification effect weakens Measure output/input ratio before deciding
    Copying someone else’s tier choice Too large causes waste; too small causes shortage Use your own call records to estimate usage

    9. Summary

    The real cost of an AI coding subscription plan can be condensed into one formula:

    Effective unit price = Monthly fee / [Weekly quota / (1 + (f − 1) · p) × 4.343]

    Three key points follow from this formula:

    1. Use a consistent basis.
      Compare monthly fees with monthly costs. Multiply weekly quotas by the average number of weeks per month.

    2. Apply dynamic folding.
      Cache hit rate, peak usage ratio, and output token ratio all change the real capacity of the quota.

    3. Let data drive decisions.
      Use your own call records to select tiers, schedule off-peak tasks, and optimize caching.

    Under the illustrative parameters in this article, the effective off-peak prices of the three tiers are about 0.28–0.37 CNY per million tokens, roughly six to eight tenths of the comparison pay-as-you-go price. If peak and off-peak usage are mixed, the saving is smaller, often around five to seven tenths of the pay-as-you-go price. Higher tiers generally have lower marginal prices. The break-even peak usage ratio is about 34% for the lowest tier and about 64% for the highest tier.

    All numbers in this article are illustrative. For real decisions, use your own measured data and the official billing rules of your model service provider.