# Domestic AI Chip Text-to-Image Models: End-to-End Evaluation and Deployment Guide

    This guide explains how to evaluate and deploy text-to-image models trained on domestic (Chinese) AI chips from end to end. It starts with a three-step hands-on test, then covers prompt structuring and checklists for data governance, compute scheduling, operator adaptation, and training reproducibility. It also presents a quantifiable evaluation framework spanning semantic consistency, image quality, Chinese-language robustness, and performance metrics. The guide then outlines a minimum cloud deployment architecture and common mistakes to avoid, and closes with a one-page pre-launch checklist. Readers will learn how to judge whether such a model is ready for production, rather than relying on sample images alone.

    Why the Full Pipeline Matters More Than a Single Image

    How should you choose a fully domesticated text-to-image model, try it out, and avoid common pitfalls? The answer is not whether a single sample image looks good. It is whether the end-to-end pipeline can be reproduced reliably, improved continuously, and taken to production in compliance with requirements.

    The value of a fully domesticated pipeline goes beyond swapping in new compute hardware. It brings data, training, operator adaptation, inference deployment, and operations monitoring into one controllable system.

    A Minimal Hands-On Test: Three Steps to Check Usability

    If you have just been handed a text-to-image model built on a fully domestic training stack, do not start by looking at sample images. A more reliable approach is to run the three-step minimal test below.

    1. Enter test prompts
      Prepare three categories of prompts:

      • Basic: a simple description of one subject.
      • Complex: a long sentence combining several elements.
      • Exclusion: a description that includes terms the model should avoid.

      Examples (translated from Chinese for readability):

      • Basic: A white cat sitting on a wooden windowsill.
      • Complex: Three people sitting around a table in discussion, shot from above, warm lighting, a metallic tabletop, low-saturation illustration style.
      • Exclusion: An orange cat lying on a table, the background is a study, photorealistic style, no text, no watermark, no extra people.
    2. Check semantic consistency
      Focus on whether the subject, attributes, count, spatial relationships, style words, and exclusion terms are understood correctly. Do not judge only whether the image “looks right”. Check whether the prompt has been reconstructed in a structured way.

    3. Record quality and performance metrics
      On the quality side, record sharpness, edges, texture, artifacts, and lighting consistency. On the performance side, record resolution, sampling steps, batch size, concurrency, average latency, P95 latency, GPU memory usage, and throughput.

    These three steps turn a subjective impression into a reviewable, repeatable experience record.

    Text-to-Image Is More Than “Text In, Image Out”

    A text-to-image model may look like a simple text-to-picture converter, but it actually combines several layers of capability:

    • Text understanding: identifying subjects, attributes, actions, counts, spatial relationships, and style words.
    • Cross-modal alignment: mapping a Chinese description to the corresponding image semantics.
    • Image generation: sampling, denoising, and iterative generation in latent space.
    • Style control: handling styles such as photorealism, illustration, design sketches, and concept art.
    • System integration: working alongside modules for prompt rewriting, image post-processing, and content moderation.

    Chinese prompts work best with a structured template: subject + attributes + count + spatial relationships + style + exclusions.

    Good example (translated from Chinese): A metallic mechanical wristwatch with crisp hands on the dial, three people sitting around in discussion, shot from above, warm lighting, photorealistic photography style, low saturation, no text, no watermark.

    Bad example: A nice watch, lots of people, high-end feel.

    The bad example omits count, spatial relationships, style, and exclusions. The model has to guess these details, so the output tends to drift from one run to the next.

    Key Stages of a Fully Domesticated Pipeline: Checklists

    1. Data governance: it sets the model’s ceiling

    A fully domesticated pipeline does not stop at swapping chips. The data side needs to be controlled too. At a minimum, review the following:

    Check item What to review Pass criteria
    Data cleaning Low-quality, blurry, overexposed, or heavily occluded samples Noisy samples filtered out or down-weighted
    Deduplication Duplicate images, near-duplicates, and one image with multiple captions Duplicate rate within an acceptable range
    Copyright review Source of assets, scope of licenses, and intended training use Clear copyright ownership or compliant license
    Privacy protection Faces, ID documents, home addresses, and personal information Sensitive information masked or removed
    Sensitive content filtering Violence, pornography, and illegal or prohibited material Blocking rules in place, with audit records from spot checks
    Chinese-language balance Long Chinese sentences, local styles, and industry terminology Reasonable proportion of Chinese-context samples
    Version records Data version, cleaning rules, and ingestion date Every batch is traceable

    If the data distribution is too narrow, the model tends to be unstable with complex Chinese sentences, combinations of multiple subjects, and descriptions of spatial relationships.

    2. Compute scheduling: cluster efficiency and stability

    Training on domestic AI chips is not just about single-card peak performance. You also need to look at multi-node, multi-GPU communication, parallelism strategy, memory allocation, and job recovery. Watch closely for:

    • whether multi-node, multi-GPU communication is stable;
    • whether the chosen data, tensor, or hybrid parallelism strategy is appropriate;
    • whether GPU or host memory overflows frequently;
    • whether training jobs can resume from checkpoints;
    • whether cluster resource utilization can be monitored.

    Start with small-scale stress tests before scaling up. Otherwise, cluster bottlenecks will surface before the model finishes training.

    3. Operator adaptation: validate it, don’t just confirm it runs

    Operator adaptation is one of the biggest risks when training on domestic chips. Set up the following five verification types:

    Verification What to check Criteria
    Operator coverage list Whether matrix multiplication, attention, normalization, activation functions, convolution, interpolation, and pooling are supported Key operators have native implementations or viable substitutes
    Numerical comparison Inputs, outputs, loss curves, and generated results compared against a reference framework or known baseline Errors within an acceptable range, with no persistent oscillation
    Dynamic shape testing Different resolutions, batch sizes, and sequence lengths Recompilations stay manageable, with no frequent performance jitter
    Graph compilation stability Repeated consecutive runs, observing first-time compilation, warm starts, and the steady state High compilation success rate and stable results
    Performance regression check Step time or inference latency compared against the baseline configuration Flagged as anomalous once a defined regression threshold is exceeded

    If a key operator is missing, substituting general-purpose operators is an option. In that case, you must record the resulting performance loss and accuracy changes.

    4. Training stability: from “it runs” to “it reproduces”

    Training stability determines your downstream operations cost. Monitor:

    • whether the loss curve is smooth;
    • whether batches cause sharp fluctuations;
    • whether random seeds can be fixed;
    • whether checkpoints are complete;
    • whether training can resume after an interruption;
    • whether different configuration versions produce drifting results.

    The more reproducible the training, the easier it is to run canary releases, rollbacks, audits, and root-cause analysis later.

    A Quantifiable Evaluation Framework

    1. Semantic consistency

    Use a fixed test set that covers subjects, attributes, counts, spatial relationships, styles, and exclusions. For example (translated from Chinese):

    • A blue umbrella placed on a wooden table, with a rainy night street in the background.
    • Low-saturation illustration style, a city skyline, thin morning mist.
    • Three people sitting around in discussion, shot from above, warm lighting.
    • A metallic mechanical wristwatch, clean lines, industrial design sketch, no text.

    When evaluating, check whether the subject appears, attributes are accurate, counts are correct, spatial relationships make sense, styles take effect, and exclusion terms are avoided.

    2. Image quality scorecard

    Dimension 1 point 3 points 5 points
    Subject structure Subject missing or severely distorted Subject mostly intact Natural, stable subject structure
    Texture detail Blurry, with heavy smearing Some details discernible Clear and plausible details
    Artifact control Obvious noise and repeated textures Minor artifacts Few artifacts, none affecting usability
    Lighting consistency Chaotic lighting Mostly plausible Natural, unified lighting

    3. Chinese-language robustness

    Chinese prompts often contain long modifiers, nested relationships, colloquial phrasing, and negation. Focus your tests on:

    • whether long Chinese sentences are understood as a whole, or only partially;
    • whether relationships between multiple subjects get mixed up;
    • whether negation words take effect;
    • whether abstract descriptions translate into sensible visuals;
    • whether Chinese style words trigger reliably.

    4. Performance and resource usage

    Performance results are only comparable if you state the test conditions. Include at least the following fields:

    Field Example
    Chip environment Domestic chip model, driver version, framework version
    Resolution 512×512, 768×768, 1024×1024
    Batch size 1, 2, 4
    Concurrency 10, 50, 100
    Sampling steps 20, 30, 50
    Cache hits Whether prompt caching and intermediate-result caching are enabled
    Metric definitions Average latency, P95 latency, throughput, GPU memory usage, queue wait time

    Performance numbers without their test conditions have no reference value.

    Minimal Cloud Deployment Path

    A typical pipeline looks like this:

    User request → API gateway → asynchronous task queue → inference service cluster → object storage for images → content safety review → result returned → logging and monitoring.

    Minimum deployment checklist:

    Module Key dependencies
    API gateway Authentication, rate limiting, input validation
    Task queue Task IDs, status tracking, failure retries
    Inference service Model version, operator version, resource pool configuration
    Object storage Image archiving, access control, lifecycle management
    Content moderation Prompt filtering, image review, blocking logs
    Monitoring Request volume, success rate, P95 latency, queue backlog, resource utilization

    Image generation tasks take a relatively long time. An asynchronous task model is recommended so that synchronous requests do not overwhelm inference resources.

    Common Mistakes and How to Address Them

    1. Judging by a single image
      Add complex long sentences, negation words, and multi-subject tests.

    2. Not fixing the test conditions
      Changes in resolution, steps, batch size, or concurrency all affect results.

    3. Ignoring data compliance
      Copyright, privacy, and sensitive content must be reviewed up front. Otherwise, launch risks are high.

    4. Missing operator regressions
      Establish a baseline and regularly compare step time and inference latency against it.

    5. Experience drift after version upgrades
      Use canary releases and monitor success rate, semantic consistency rate, P95 latency, and the share of manually flagged unsatisfactory results.

    One-Page Checklist

    Confirm each item before launch:

    • Data: cleaning, deduplication, copyright, privacy, sensitive content filtering, version records.
    • Operators: coverage list, numerical comparison, dynamic shapes, graph compilation stability.
    • Training: loss curve, random seeds, checkpoints, recovery from interruptions.
    • Evaluation: semantic consistency, image quality, style control, Chinese-language robustness.
    • Performance: resolution, batch size, concurrency, sampling steps, hardware environment, cache hits.
    • Deployment: API gateway, task queue, inference, storage, moderation, monitoring.
    • Operations: version comparison, canary releases, incident archiving, a closed loop for human feedback.

    Overall, evaluating a fully domesticated text-to-image model should go beyond “can it generate an image?”. You need to determine whether it offers stable training, controllable inference, quantifiable evaluation, and operable deployment. The model is a better fit for moving from an experimental environment to production only when all seven areas — data, operators, training, evaluation, deployment, security, and operations — meet the bar.