Next-Generation Video Coding in the Era of Real-Time Interaction

    As video applications shift toward real-time interaction scenarios such as video conferencing, cloud gaming, and VR, video coding technology must evolve beyond traditional compression efficiency. This article explores the key drivers behind this transition, the development focus of open video coding technologies, and critical technical challenges including end-to-end latency control, dynamic bitrate balancing, and hardware-software synergy. It also outlines encoder design strategies, the importance of audio-video synchronization, testing methodologies, and future trends in real-time video encoding.

    1. Why Video Coding Technology is Shifting to Real-Time Interaction

    In the past, the core goals of video coding standards were typically to reduce the bitrate, improve image quality, and ensure compatibility across different terminals. For scenarios like video-on-demand and long-video distribution, encoders could utilize more complex search algorithms, longer analysis windows, and higher computational loads in exchange for better compression efficiency.

    However, the constraints of real-time interactive services are completely different. Applications such as video conferencing, online classrooms, remote control, cloud gaming, virtual reality, and smart cockpits not only require clear visuals but also demand rapid feedback for user operations. Any latency in the encoding, transmission, decoding, or rendering pipeline can cause stuttering, ghosting, audio-video desynchronization, and even impact interactive decisions.

    Therefore, the evaluation metrics for next-generation video coding technology are expanding from a single focus on compression efficiency to a comprehensive metric system:

    • Reduce the video bitrate as much as possible under the same subjective image quality;
    • Maintain a stable encoding speed under limited computing power and power consumption;
    • Shorten the first-frame time, encoding waiting time, and decoding buffer time;
    • Improve recoverability in weak network environments with packet loss and jitter;
    • Support multi-terminal, multi-resolution, and dynamic bitrate switching;
    • Retain sufficient information quality for machine vision, spatial video, and immersive interaction.

    2. Development Focus of Open Coding Technologies

    The value of open video coding solutions lies not only in being free or open-source but also in their ability to drive the industry toward a transparent, collaborative, and sustainably evolving technological ecosystem. For developers and enterprises, open standards typically mean easier cross-platform adaptation and facilitate the construction of a complete toolchain from capture, encoding, and transmission to playback.

    The development focus of next-generation solutions is mainly concentrated in the following areas.

    First is the refinement of compression tools. Encoders reduce redundancy through intra prediction, inter prediction, motion compensation, transform quantization, loop filtering, and entropy coding. Future improvements will not rely solely on a single algorithm but will seek a more reasonable balance between prediction accuracy, block structure partitioning, reference frame management, and error correction.

    Second is the emphasis on real-time performance. Traditional high-compression-rate encoding often requires complex mode searches and multiple rounds of decision-making, which brings high computational costs. Encoders designed for real-time interaction need to provide clearer speed tiers, allowing developers to choose different search depths, parallel strategies, and latency modes based on device capabilities.

    Third is the adaptability to dynamic content. Static conference screens, fast-motion footage, screen sharing, animation content, and low-light videos have different statistical characteristics. The encoder needs to dynamically adjust keyframe intervals, quantization strategies, the number of reference frames, and bitrate allocation based on scene changes, rather than using a fixed set of parameters for all content.

    3. Key Technical Issues in the Real-Time Video Link

    3.1 End-to-End Latency Control

    The latency of real-time services cannot be measured solely by network transmission time. The complete latency usually includes multiple stages: capture, preprocessing, encoding, sending, queuing, network transmission, decoding, rendering, and display device refresh.

    A common latency analysis model can be expressed as:

    End-to-end delay = capture delay + encoding delay + queuing delay + network delay + decoding delay + rendering delay

    Among these, queuing delay is often the most easily overlooked. When the sending end continuously generates data and the network bandwidth is temporarily insufficient, the buffer will continuously accumulate. Even if the encoder itself is very fast, an excessively long sending queue will cause users to experience noticeable lag.

    In engineering, infinite buffer growth should be avoided, and the upper bound of latency should be limited through strategies such as congestion control, discarding expired frames, and dynamically downgrading resolution. For services like remote control, it is better to moderately reduce image quality than to let old frames continuously occupy transmission resources.

    3.2 Dynamic Balance of Bitrate and Image Quality

    Network conditions for real-time video change constantly, and a fixed bitrate usually cannot adapt to complex environments. An excessively high bitrate will cause congestion and packet loss, while an excessively low bitrate will result in obvious mosaic artifacts, loss of detail, and blurred text.

    Dynamic bitrate control needs to observe multiple signals simultaneously:

    • Current sending rate and receiving rate;
    • Round-trip time (RTT) and jitter changes;
    • Packet loss rate and retransmission status;
    • Encoder buffer occupancy;
    • Image complexity and motion amplitude;
    • Receiver decoding capability and device load.

    For screen sharing scenarios, text clarity is usually more important than continuous visuals; for sports and gaming scenarios, motion continuity is more critical. Therefore, bitrate control should not rely solely on objective metrics like Peak Signal-to-Noise Ratio (PSNR) but should be optimized in combination with business content.

    3.3 Low-Complexity Coding and Hardware Synergy

    Real-time encoding usually needs to run on general-purpose processors, graphics processing units, or dedicated media chips. Relying entirely on high-complexity software encoding can easily lead to device overheating, increased power consumption, and frame rate drops; relying too heavily on hardware fixed paths may be limited by driver capabilities and parameter openness.

    A more reasonable approach is to adopt software-hardware synergy:

    • Use hardware to complete high-frequency, rule-based encoding workflows;
    • Use software to handle scene analysis, bitrate decision-making, and business strategies;
    • Apply finer quality control to key frames;
    • Reduce single-frame processing time through task parallelism;
    • Automatically select the encoding level based on terminal capabilities.

    On mobile devices and edge terminals, attention should also be paid to memory bandwidth, cache hit rates, and power consumption, rather than just observing the encoding frame rate.

    4. Encoder Design Methods for Real-Time Interaction

    To meet low-latency requirements, encoders can be designed from the following directions.

    First, shorten inter-frame dependencies. A long reference chain helps compression but increases decoding wait times and the risk of error propagation. In real-time mode, the number of reference frames should be controlled, and keyframes and independently recoverable frames should be set reasonably so that the system can recover faster after network fluctuations.

    Second, reduce block decision costs. A finer block structure helps adapt to complex textures but significantly increases the search space. The encoder can adopt different search strategies based on the texture and motion of image regions, processing flat areas quickly and investing more computing resources into high-detail areas.

    Third, optimize parallel capabilities. Encoding tasks can be split by frame, row, region, or pipeline stage, but higher parallelism may introduce synchronization waits and additional memory accesses. The design needs to strike a balance between parallel efficiency and compression effectiveness.

    Fourth, strengthen error recovery. In real-time networks, packet loss cannot be completely avoided. The encoding system should combine methods such as keyframe requests, local refresh, redundant information, and selective retransmission to prevent a single packet loss from causing prolonged visual anomalies. For interactive scenarios, recovery speed is usually more important than the extreme compression rate of a single transmission.

    5. Audio-Video Synergy Cannot Be Ignored

    Although this article focuses on video coding, the real-time interactive experience is not determined by video alone. Voice, video, data channels, and control signaling must undergo unified time management.

    First, a stable timestamp system must be established to prevent the capturing, encoding, and playback ends from using different time bases. Second, reasonable synchronization strategies should be set for audio and video; one stream should not simply wait indefinitely for the other. Furthermore, during network fluctuations, priority should be given to ensuring voice and key control information, while video can release bandwidth by reducing resolution, lowering frame rate, or temporarily skipping frames.

    For screen sharing and remote operations, information such as mouse trajectories, input events, and text regions can be transmitted as independent data rather than relying entirely on video frames. This not only reduces encoding pressure but also improves interaction precision.

    6. Testing Methods in Development and Deployment

    When evaluating a real-time encoding solution, one should not only test ideal networks and a single video. It is recommended to establish a test matrix covering multiple scenarios, including:

    • Static figures, multi-person conferences, and fast-motion footage;
    • Camera video, screen sharing, and graphical interfaces;
    • High-light, low-light, complex textures, and large areas of solid color;
    • High bandwidth, low bandwidth, sudden packet loss, and high jitter networks;
    • Mobile devices, desktop devices, and edge devices;
    • Different resolutions, frame rates, and display refresh rates.

    In terms of metrics, attention should be paid simultaneously to average bitrate, subjective image quality, encoding time, decoding time, first-frame time, end-to-end latency, packet loss recovery time, CPU usage, memory usage, and power consumption.

    In addition, testing should not rely solely on a single objective score. Certain metrics are not sensitive to text clarity, fast motion, or local details. Therefore, it is necessary to combine human perception, business success rates, and user operation feedback for a comprehensive judgment.

    7. Future Development Trends

    Next-generation video coding will continue to evolve toward “high compression efficiency, low latency, low complexity, and strong adaptability.” With AI participating in scene analysis, encoders may more accurately identify faces, text, motion regions, and interaction priorities, and allocate differentiated quality accordingly.

    At the same time, coding standards will place greater emphasis on immersive content, spatial video, multi-view video, and machine-understandable video. Future video transmission may not only serve human visual viewing but may simultaneously serve smart terminals, visual analysis systems, and real-time control systems.

    For enterprises and developers, when choosing a coding technology, one should not only look at the standard name or compression rate ranking. Instead, one should evaluate terminal coverage, hardware support, ecosystem maturity, operations and maintenance costs, network adaptability, and long-term evolution space from the perspective of the complete business pipeline. A solution truly suitable for real-time interaction must achieve a sustainable engineering balance among image quality, latency, cost, and stability.