Developing UEFI Graphics Programs with AI Coding Assistants: Practice and Debugging
This article explores developing graphics programs at the UEFI/BIOS firmware level with the help of AI coding assistants. It explains why firmware-layer graphics development is uniquely demanding, breaks down three core difficulties—locating and calling the Graphics Output Protocol (GOP), timing pitfalls in mode setting and the framebuffer, and GUID configuration errors—and presents a reusable two-round development methodology: moving from "compiles" to "runs" through code review and serial-log debugging, then refining and optimizing. It closes with engineering takeaways on why thorough code review and observability matter most in low-level firmware work.
Why Graphics Development at the Firmware Level Is Worth Attention
When developing graphics programs on top of an operating system, you typically have mature graphics libraries, driver frameworks, and debuggers to fall back on. But once you go down to the UEFI/BIOS firmware layer, developers face a “bare” execution environment: no abstractions provided by an operating system, no ready-made input/output libraries. Everything must interact directly with hardware through the boot services and protocols defined by the UEFI specification.
Writing a graphics program in this environment that runs during the power-on self-test phase—say, a simple Breakout or Snake game—the difficulty does not lie in the game logic itself, but in correctly using the Graphics Output Protocol (GOP), and in precisely controlling manual memory management, framebuffer access, and mode settings. This kind of task is well suited to testing a coding assistant’s real capabilities in “niche, low-level, heavily constrained” scenarios: whether it understands the UEFI specification, whether it can locate subtle defects at the protocol-call level, and whether it can still converge to runnable code after repeated errors.
Three Core Challenges of UEFI Graphics Programs
1. Obtaining and Calling the Graphics Output Protocol
UEFI exposes hardware capabilities through a protocol mechanism, and graphics output is provided by the GOP. Developers first need to use LocateProtocol to locate the protocol instance, then complete mode query, mode setting, and pixel block transfer (Blt) through its function pointers. The difficulty here is that all calls are manual and low-level—a single wrong pointer can cause the firmware to crash and reboot.
// Locate the Graphics Output ProtocolEFI_GRAPHICS_OUTPUT_PROTOCOL *gop = NULL;status = gBS->LocateProtocol(&gEfiGraphicsOutputProtocolGuid, NULL, (VOID **)&gop);
2. Timing Pitfalls in Mode Setting and the Framebuffer
A common mistake is: after calling QueryMode to obtain the framebuffer info pointer, immediately calling SetMode to switch resolution, and then continuing to use that previously obtained info pointer. The problem is that SetMode may reallocate memory or change internal state, so the memory that the previously obtained info pointer refers to is already invalid; continuing to use it becomes accessing a “wild pointer”. The correct approach is to query the current mode’s framebuffer info again after SetMode:
// Set the target modestatus = gop->SetMode(gop, targetMode);// Key: framebuffer info must be re-fetched after SetModeEFI_GRAPHICS_OUTPUT_MODE_INFORMATION *info = NULL;UINTN sizeOfInfo = 0;status = gop->QueryMode(gop, gop->Mode->Mode, &sizeOfInfo, &info);// Then use fields like info->FrameBufferBase to draw
3. GUID Configuration Errors
There are multiple graphics-related GUIDs in UEFI, and the correct protocol GUID must be used when locating the Graphics Output Protocol. Using the wrong GUID causes protocol location to fail or returns the wrong protocol instance. The symptom is often “the program runs but the interface does not show up”—no error, no crash, just a black screen. These problems are the hardest to diagnose because, unlike a pointer crash, they do not produce a clear interrupt signal.
A Two-Round Development Methodology with an AI Coding Assistant
For the challenges above, a reusable approach is to adopt “two-round development”: the first round aims to move the program from non-runnable to basically runnable, and the second round handles refinement and optimization. Throughout the process, the AI coding assistant plays the roles of code review, debugging enhancement, and iterative fixing.
Round 1: From “Compiles” to “Runs”
Step one: review the code first. Facing existing code with a modular structure (usually containing an entry function, main loop, game logic, rendering module, input handling, and several other files), do not rush to run it. First have the AI coding assistant read through each module and output a list of issues, focusing on protocol location, mode-setting timing, pointer lifetimes, and GUID usage. This step exposes many statically visible defects before running, avoiding blind trial and error.
Step two: use debugging output to locate the crash. The program compiles and enters the main loop, but exits at a certain step—this is the most typical phenomenon at the firmware level. At this point, inject serial debug output along the critical path to gradually narrow down the code range where the crash occurs. In practice, crashes often occur right after a protocol call. Combined with the framebuffer timing pitfall mentioned earlier, it usually turns out to be the problem of continuing to use an invalid pointer after SetMode, and the fix is to re-fetch the framebuffer info after switching modes.
Step three: handle “silent failure”. When the program runs but the interface does not display, the problem mostly lies in the protocol GUID configuration or the rendering target. These problems require the assistant to perform causal analysis based on runtime results: the fact that the program does not crash means the main flow is unobstructed, so the problem is concentrated in the acquisition or initialization of graphics output. Based on this, checking the GUID and protocol location logic one by one will pinpoint the issue.
Round 2: Refinement and Optimization
The output of the first round is often “runs but rough”: the frame rate may be unstable, input response may lag, drawing may flicker, or there may be memory leaks. The second round introduces goals of targeting and maintainability, letting the AI coding assistant optimize item by item without breaking the already-working functionality, for example:
- Eliminating redundant per-frame calls such as repeated mode queries;
- Optimizing the rendering path to reduce direct and frequent access to video memory;
- Covering edge cases in input handling;
- Checking that memory allocation and release are paired, avoiding resource leaks that are hard to reclaim in a firmware environment.
Some Thoughts on AI-Assisted Firmware Development
Some may question that having different AI coding tools do different tasks is not fair and cannot be compared side by side. This view has merit, but if the focus shifts from “horizontal benchmarking” to “how to use AI effectively”, the conclusion becomes more valuable. The real practical value does not lie in scoring tools, but in verifying one thing—whether AI can, in niche, heavily constrained, documentation-scarce low-level scenarios, steadily push a “looks decent but won’t run” project to a usable state.
From an engineering perspective, there are two points that firmware developers should value. First, even complete code needs review. Even code with a proper structure and clear modules may hide defects like protocol-call timing and pointer lifetimes that are hard to detect statically; using AI to do a systematic code review first is the lowest-cost line of defense. Second, observability is key to diagnosing low-level problems. When the firmware level lacks an advanced debugger, serial logs are almost the most important observation tool; actively and densely injecting debug information, combined with AI for causal analysis, can significantly improve localization efficiency.
Whether you use a general-purpose AI coding assistant or rely on AI coding capabilities offered by platforms like Baidu AI Cloud, the methodology is the same: review first, then run, use logs to narrow the range, and proceed in two rounds of “runnable—optimizable”. Mastering this process is more valuable in the long term than remembering the name of any single tool.
