"Autoregressive Blank Infilling" Pretraining Framework: Principles and Engineering Practices

    This article explains the autoregressive blank infilling pretraining framework, a single training objective that unifies language understanding and text generation in one model. It starts from the objective design—span selection, position numbering, and 2D block attention masks—with illustrative code for span sampling, mask construction, loss computation, and greedy infilling. It then covers the engineering chain that ultimately determines real-world results: data cleaning and deduplication, hybrid parallel training, distributed fault tolerance, training stability, post-training (SFT, RLHF, DPO), and inference optimization and serving. Finally, it discusses capability extensions such as multimodal models, agents, and Model as a Service, an industry-oriented RAG workflow, a three-layer evaluation system, and practical guidance on common pitfalls and model selection.

    Introduction: Can One Pretraining Objective Do Both “Reading” and “Writing”?

    Over the past few years, pretraining approaches for large language models have largely fallen into two categories. The first is autoregressive language modeling, which looks only at the preceding text and predicts the next token one at a time; it excels at continuation and dialogue. The second is masked language modeling, which uses context from both the left and the right to reconstruct masked tokens; it excels at classification, extraction, and matching. Each type of model has clear strengths on its own turf, yet both have obvious weaknesses. When deploying in production, enterprises often have to maintain a separate model for “understanding” and for “generation,” leading to duplicated investment in training, deployment, and operations.

    Autoregressive blank infilling offers a different idea: randomly cut out spans of continuous text as “blanks,” then have the model fill them back in token by token in an autoregressive manner, using information from both sides of the blank. When there is only a single span located at the end of the sequence, it degenerates into a standard autoregressive language model. As a result, the same model can support generation, understanding, and infilling with a single objective. A pretraining framework built on this idea can be called an autoregressive blank infilling pretraining framework.

    Such frameworks are often treated as a pretraining architecture. In practice, however, the engineering pipeline behind them is long, involving data cleaning and deduplication, hybrid parallel training, distributed fault tolerance, inference optimization, and serving. These steps often determine the final results as much as the objective itself. This article starts from the objective design, works through the mechanisms and engineering practices layer by layer, and provides illustrative code to help developers and enterprise readers build a systematic understanding.

    1. Principles: What Does Autoregressive Blank Infilling Actually Do?

    1.1 Three Approaches Compared: Why “Infilling”?

    Dimension Unidirectional LM Bidirectional Masked LM Autoregressive Infilling
    Context usage Preceding text only Both sides Both sides of the blank
    Prediction method Predict the next token Reconstruct masked tokens in parallel Autoregressively predict tokens within the blank
    Generation ability Native Usually needs extra adaptation Training objective matches the generation form
    Typical tasks Continuation, dialogue Classification, extraction, matching Generation, understanding, and infilling

    The training objective of unidirectional language modeling is generation itself, which naturally aligns with tasks like dialogue and writing. But it can only see the left-side information, so it lacks a global view when dealing with coreference and long-distance dependencies. Bidirectional masked modeling can use the full context and performs strongly on understanding tasks, but generation requires additional design.

    Real business needs are often composite. An intelligent customer service system must both understand user intent and look up tickets, and generate natural replies; contract review must both extract key clauses and generate summaries and risk notes. If two separate models are used for these two capabilities, enterprises must maintain two training pipelines, two inference services, and two evaluation standards, raising both cost and consistency risk. Autoregressive infilling unifies understanding and generation under one objective, promising to let a single model cover more scenarios.

    1.2 Three Key Designs: Spans, Positions, and Masks

    The effectiveness of autoregressive blank infilling depends largely on three design details.

    1. Selecting text spans. This is not about masking whole sentences: spans that are too long lose too much context, while spans that are too short make it hard to learn long-range generation. In practice, span length is often made to roughly follow a Poisson distribution, with about 15% of tokens chosen as masking targets—on the same order as the masking ratio in masked language modeling. Spans do not overlap, and the model must predict one span in sequence before it can “see” the next, which ensures ordering in generation.
    2. Position numbering. Every token carries a position and a span index. Tokens in a masked span have contiguous positions but can only see tokens within their own span; tokens in unmasked spans retain their original positions in full.
    3. Attention visibility. Unmasked tokens are visible to one another in the standard causal way, and the context before a masked span can see all tokens inside the span. This forms a 2D block matrix: information cannot be read horizontally across blocks, while within a span it forms a complete causal block.

    The following pseudocode demonstrates span sampling. In practice, special tokens are usually avoided, and the total masking ratio is controlled:

    1. import random
    2. def sample_spans(seq_len, span_prob=0.15, lam=3.0, seed=0):
    3. """Sample several contiguous spans on a token sequence of length seq_len as infilling targets
    4. Args:
    5. span_prob: expected proportion of tokens to mask
    6. lam: Poisson distribution parameter for span length
    7. seed: random seed for reproducibility
    8. Returns:
    9. spans: [(start, end), ...], half-open intervals
    10. """
    11. rng = random.Random(seed)
    12. target = int(seq_len * span_prob) # expected number of tokens to mask
    13. spans, used = [], 0
    14. while used < target:
    15. span_len = min(rng.poissonvariate(lam) if hasattr(rng, "poissonvariate") else lam, target - used)
    16. if span_len <= 0:
    17. break
    18. max_start = seq_len - span_len
    19. if max_start <= 0:
    20. break
    21. for _ in range(50): # try at most 50 times to avoid an infinite loop
    22. start = rng.randint(0, max_start)
    23. end = start + span_len
    24. if all(end <= s or start >= e for s, e in spans): # do not overlap with existing spans
    25. spans.append((start, end))
    26. used += span_len
    27. break
    28. spans.sort()
    29. return spans

    Next, construct the 2D attention mask: flatten the 2D matrix into a 1D sequence of length n², where 0 means “allowed to attend” and 1 means “masked.” This lets you directly reuse the implementation of a causal mask:

    1. def build_2d_attn_mask(seq_len, spans):
    2. """Build a 2D block attention mask
    3. Semantics:
    4. - Unmasked positions can only see themselves and earlier positions (causal block)
    5. - Positions inside a masked span can see all context before the span
    6. - Different blocks are disconnected from each other
    7. """
    8. matrix = [[0] * seq_len for _ in range(seq_len)]
    9. covered = [False] * seq_len
    10. for start, end in spans:
    11. covered[start:end] = [True] * (end - start)
    12. for i in range(seq_len):
    13. for j in range(seq_len):
    14. if not covered[i]:
    15. # Regular position: masked when j > i
    16. matrix[i][j] = int(j > i)
    17. elif i < j:
    18. # Inside a span: only allow forward attention within the same span
    19. in_same_span = any(s <= i < e and s <= j < e for s, e in spans)
    20. matrix[i][j] = 0 if in_same_span else 1
    21. # Flatten into a 1D mask; position (i, j) corresponds to i * seq_len + j
    22. return [v for row in matrix for v in row]

    Example: the original token sequence is A B [M] [M] C D, where B and C form a span (length 2) and D is a separate, non-adjacent span (length 1). After masking, the sequence becomes A [M] [M] [M] [M] D. In real implementations, a special marker [S] is inserted before a masked span and [E] after it to mark generation boundaries.

    The figure below uses “■” to mean “row i can attend to column j” and “□” to mean masked:

    1. A M M M M D
    2. ■ □ □ □ □ □ A
    3. ■ ■ □ □ □ □ M
    4. ■ ■ ■ □ □ □ M
    5. ■ ■ ■ ■ □ □ M ← inside a span: can see earlier context, cannot see later tokens within the span
    6. ■ ■ ■ ■ ■ □ M
    7. ■ □ □ □ □ ■ D ← between spans: fully isolated from each other

    From the mask, we can see that inside a span it is a complete causal block: the first M can only see A, the second M can see A and the first M, and the two generate B and C from the original sentence in sequence. The unmasked D cannot see any M and can only continue predicting based on A. This means:

    • During training, the model switches between “infilling” and “continuation” modes, gaining both understanding and generation abilities.
    • During inference, for newly added content, you can append [S] and a group of M at the end to play the role of a span, thereby reusing the same decoding logic.

    1.3 Loss and Decoding: Computed Only on the “Blanks”

    Language models predict tokens one by one, typically using cross-entropy loss. Autoregressive infilling is the same, but it computes loss only at masked span positions: unmasked tokens serve only as conditions and do not participate in loss computation.

    1. def infilling_loss(logits, ids, spans, seq_len, ignore_index=-100):
    2. """Compute cross-entropy loss only at masked span positions
    3. Args:
    4. logits: vocabulary distribution output by the model, shape [B, L, V]
    5. ids: input tokens, shape [B, L]
    6. spans: span position list aligned with the batch
    7. seq_len: sequence length
    8. """
    9. targets = full_like(ids, fill_value=ignore_index)
    10. for b in range(ids.shape[0]):
    11. for start, end in spans[b]:
    12. # Position i predicts the token at position i+1, so span labels start from start + 1
    13. targets[b, start + 1: end + 1] = ids[b, start + 1: end + 1]
    14. return cross_entropy(logits.view(-1, logits.size(-1)), targets.view(-1),
    15. ignore_index=ignore_index)

    In the illustration above, the position at start receives the span’s starting marker; its input is the context before the span, and its prediction target is precisely the first token of the blank. Therefore the loss is aligned starting from start + 1.

    During decoding, the model starts from the span’s starting marker and generates in a loop until it hits the span-ending marker; the stopping condition is the same as for an autoregressive model.

    1. def greedy_infill(model, prompt_ids, max_new_tokens=64, eos_id=None):
    2. """Continue a blank at the end of the prompt and reconstruct content with greedy decoding"""
    3. for _ in range(max_new_tokens):
    4. logits = model(prompt_ids) # [1, L, V]; with a KV cache, only the new part needs a forward pass
    5. next_id = int(logits[0, -1].argmax()) # take the token with the highest probability
    6. prompt_ids.append(next_id) # real implementations use incremental KV caching to avoid recomputation
    7. if eos_id is not None and next_id == eos_id:
    8. break
    9. return prompt_ids

    2. Training Engineering: Making the Framework Run Reliably

    2.1 Data Pipeline: The First Gate That Sets the Model’s Ceiling

    The quality of large-scale pretraining is largely determined by data. A reusable data pipeline typically includes the following steps:

    • Collection and normalization. Unify encoding, remove web templates and navigation noise, fix garbled text, and keep necessary structured fields for the business scenario.
    • Privacy and compliance. Clean out personal information, keys, and other sensitive content. When enterprise data is involved, authorization and compliance review must be completed before collection.
    • Deduplication.
      • Exact deduplication: use hashing to quickly identify duplicate documents.
      • Near deduplication: use locality-sensitive hashing algorithms such as MinHash to identify highly similar documents.
      • Duplicate content causes models to memorize and creates data leakage in evaluation.
    • Quality filtering.
      • Rule-based filtering: set thresholds based on length distribution, symbol ratio, stopword ratio, and so on.
      • Model-based filtering: use a lightweight classifier to judge content quality, or use perplexity to measure text readability.
    • Vocabulary and tokenization. Use subword segmentation methods such as BPE (Byte Pair Encoding). Vocabulary size requires a trade-off: a larger vocabulary means each token carries more information and sequences are shorter, but the parameters and computation of the embedding and output layers also grow.
    • Packing and mixing. Concatenate short documents into fixed-length sequences to avoid wasting compute on large amounts of padding. Also sample by domain ratio, controlling the proportion of general corpus versus industry-specific corpus.
    • Splitting train and validation sets. The evaluation set must be strictly isolated to prevent training data from “contaminating” evaluation results.

    Before entering the training loop, it is recommended to run a “smoke test” first: run the full pipeline with a tiny model and a small amount of data, and confirm the loss decreases normally. This step exposes subtle problems such as data misalignment and label alignment errors early.

    2.2 Distributed Parallelism: Combining Four Strategies

    Parallel strategy What is split Main communication Applicable scenarios
    Data parallelism Data in each batch Gradient synchronization First choice when a single GPU can fit the full model
    Tensor parallelism Weight matrices inside a layer One collective communication each in forward and backward per layer Single machine, multiple GPUs, high-bandwidth intra-node interconnect
    Pipeline parallelism Model stages split by layer Point-to-point activation transfer between adjacent stages Cross-node scaling; has pipeline bubbles
    Sequence parallelism Activations along the sequence dimension Collective communication combined with tensor parallelism Long-sequence training, reduces activation memory

    Beyond these four strategies, memory optimization techniques (such as sharding optimizer states, gradients, and parameters) can ease memory bottlenecks, at the cost of increasing communication volume stage by stage as optimization progresses. In practice, tensor parallelism is usually placed inside a node first to leverage high-speed interconnects; data parallelism is scaled across nodes; and pipeline parallelism is introduced when the model is very large.

    1. Sample launch configuration (e.g., 8 GPUs on a single machine, 8-way data parallelism)
    2. [Training]
    3. global_batch_size = 4 * 1024 * 8 # micro-batch × gradient accumulation × data-parallel degree
    4. micro_batch_size = 4 # samples per forward pass on a single GPU, constrained by memory
    5. seq_len = 4096 # sequence length, affects memory and long-range capability
    6. lr = 3e-4 # learning rate; larger scale usually needs a more conservative value
    7. warmup_steps = 2000 # learning rate warmup steps
    8. weight_decay = 0.1
    9. grad_clip_norm = 1.0
    10. accum_steps = 8 # derived from global_batch_size and parallelism degree

    The global batch size equals “single-GPU micro-batch × gradient accumulation steps × data-parallel degree.” First determine the global batch size, then derive the micro-batch size and gradient accumulation steps from the remaining memory—this is the most common tuning order for large-model training.

    2.3 Stability: Preventing Training from “Going Off the Rails”

    • Mixed precision. Model weights and computation use half precision (e.g., bfloat16), while a single-precision copy of the weights (the master weights) is kept, balancing speed and numerical stability.
    • Gradient clipping. Clip gradients by norm to prevent occasional large gradients from damaging the parameters.
    • Learning rate scheduling. Warm up first, then cosine decay, to avoid large oscillations early in training.
    • Checkpoints and fault tolerance.
      • Save checkpoints periodically, including model weights, optimizer state, learning rate scheduler state, and data-loading progress.
      • Hardware failures are hard to avoid in large-scale training; elastic fault tolerance and automatic restart are common measures.
    • Anomaly monitoring. When the training loss suddenly spikes, you can roll back to the most recent stable checkpoint and, if necessary, skip the anomalous data batch.

    Below is an illustrative training loop that combines mixed precision, gradient accumulation, and clipping:

    1. for step, batch in enumerate(loader):
    2. with autocast(dtype="bfloat16"):
    3. logits = model(batch["input_ids"]) # [B, L, V]
    4. loss = infilling_loss(logits, batch["input_ids"],
    5. batch["spans"], batch["seq_len"]) # computed only at masked spans
    6. (loss / accum_steps).backward() # gradient accumulation
    7. if (step + 1) % accum_steps == 0:
    8. grad_norm = clip_grad_norm_(model.parameters(), max_norm=1.0) # gradient clipping
    9. optimizer.step()
    10. optimizer.zero_grad(set_to_none=True)
    11. scheduler.step()
    12. if step % log_interval == 0:
    13. log_metrics(step=step, loss=float(loss), grad_norm=grad_norm,
    14. lr=scheduler.get_last_lr()[0])
    15. if step % ckpt_interval == 0:
    16. save_checkpoint(model, optimizer, scheduler, step) # checkpoint saving

    2.4 From Base to Usable Capabilities: Post-Training Is a Necessary Step

    Pretraining yields a general-purpose base model. To work reliably in a specific business, it also needs post-training:

    • Supervised fine-tuning (SFT). Curate high-quality instruction–response samples covering task format, tone and style, and output structure. When parameter resources are limited, methods like low-rank adaptation (LoRA) can be used to train only a small number of new parameters, significantly reducing memory and storage overhead.
    • Preference alignment.
      • Reinforcement learning from human feedback (RLHF) and direct preference optimization (DPO) are two common approaches.
      • The former learns human preferences through a reward model, then optimizes the policy model with reinforcement learning.
      • The latter directly optimizes on preferred/rejected paired samples, with a simpler pipeline.
    • Evaluation-driven iteration. Compare on a fixed evaluation set before and after fine-tuning to confirm that capability gains do not come at the cost of regressions elsewhere.

    3. Serving and Platformization: Turning a Model into a Stable Service

    3.1 Inference Side: Optimizations That Affect Cost

    • KV cache. Cache the key-value pairs of historical tokens to avoid recomputation; this is a must-have optimization for autoregressive decoding. When memory is insufficient, paged management can be used to reduce fragmentation waste.
    • Dynamic batching.
      • Output lengths differ greatly across requests, and waiting for the whole batch to finish slows down short requests.
      • Continuous batching lets requests join and leave one by one, improving GPU utilization.
    • Quantization. Represent weights or activations with low-bit integers to reduce memory usage and improve throughput. This requires a trade-off between accuracy and performance, along with accuracy regression testing on key tasks.
    • Prefix caching. Common prefixes such as system prompts and fixed instructions can be cached and reused to reduce recomputation.
    • Speculative decoding. Use a lightweight small model or an extra prediction head to draft several candidate tokens, then have the large model verify them in one pass, reducing the number of large-model forward passes.

    3.2 Service Side: Turning a Single Call into an Operable Service

    At a minimum, a stable model service should do the following:

    • Streaming responses. Measure time-to-first-token and end-to-end latency separately; return content first, then append incrementally.
    • Rate limiting and quotas. Set concurrency and rate limits per tenant and per endpoint to prevent individual callers from affecting overall service quality.
    • Error handling. Timeout retries should be paired with backoff strategies to avoid cascading failures during outages.
    • Observability. Collect metrics such as time-to-first-token, per-token output latency, request success rate, and queue time, and connect them to logging and monitoring alerts.

    Cloud platforms typically provide general infrastructure capabilities such as container platforms, object storage, logging services, and monitoring alerts, to support needs like elastic scaling, checkpoint and model file storage, and call-chain tracing. Platforms such as Baidu AI Cloud also offer these general cloud service capabilities, and enterprises can choose and combine them according to their own architecture.

    1. # Key control points of an inference service
    2. # 1) Access layer: unified auth, quotas, and rate limiting
    3. @app.route("/v1/chat/completions", methods=["POST"])
    4. def chat():
    5. if not rate_limiter.allow(caller_id): # rate limit per caller
    6. return error(429, "rate limit exceeded")
    7. return stream_response(generate(...)) # streaming response
    8. # 2) Inference layer: dynamic batching + KV cache + prefix cache
    9. def scheduler_loop():
    10. while True:
    11. batch = build_batch(pending_requests, max_batch_size) # form a batch from the waiting queue
    12. outputs = engine.forward(batch, kv_cache=pool, prefix_cache=cache)
    13. emit(outputs) # stream completed requests immediately
    14. # 3) Observability layer: metrics, logs, and alerts
    15. def observe(req):
    16. metrics.record(latency_first_token=req.ttft, # time-to-first-token
    17. latency_per_token=req.tpot, # per-token latency
    18. queue_time=req.queue_ms, # queue time
    19. prompt_tokens=req.in_tokens, # number of input tokens
    20. output_tokens=req.out_tokens)

    4. Capability Extensions: Multimodal, Agents, and Model as a Service

    4.1 Multimodal: Extending Beyond Text

    Multimodal models typically include a vision encoder and a modality alignment module:

    • Images first pass through a vision encoder to extract features.
    • The features are mapped through a projection layer into the language model’s word embedding space, so they enter as “visual tokens” together with text tokens.

    Training generally proceeds in two stages: first alignment pretraining on image–text pairs, then joint instruction fine-tuning with text instruction data. Scenarios such as industrial quality inspection, receipt/invoice recognition, and equipment inspection record understanding can all benefit from joint image–text understanding.

    4.2 Agents: From “Talking” to “Doing”

    Agents let a model complete multi-step tasks with the help of tools. A typical flow is:

    1. Planning: break the goal into several steps.
    2. Tool selection: decide which tool to call based on the available tool descriptions.
    3. Parameter parsing: generate structured parameters that satisfy the constraints.
    4. Observing results: read the tool’s return value and decide whether to call again or give a final answer.
    1. def agent_loop(goal, tools, model, max_steps=8):
    2. messages = [{"role": "system", "content": build_system_prompt(tools)},
    3. {"role": "user", "content": goal}]
    4. for _ in range(max_steps):
    5. reply = model.chat(messages, tools=[t.schema for t in tools])
    6. if not reply.tool_calls: # no tool call means the task is complete
    7. return reply.content
    8. messages.append(reply)
    9. for call in reply.tool_calls:
    10. try:
    11. result = tools[call.name](**call.arguments)
    12. except Exception as e: # feed the error back to the model when a tool fails
    13. result = {"error": str(e)}
    14. messages.append({"role": "tool", "content": json.dumps(result)})
    15. return "Maximum number of steps reached; task incomplete"

    Engineering-wise, agents need the following guardrails:

    • Set limits on the number of calls, single-step duration, and total token consumption.
    • Tool calls may only access pre-declared interfaces, with validated parameters.
    • High-risk operations (such as fund transfers or production configuration changes) must be manually confirmed.

    4.3 Model as a Service: A Closed Loop from Training to Delivery

    Model as a Service (MaaS) packages model capabilities into callable service interfaces, typically including:

    • Model repository: version management, weight storage, and distribution.
    • Inference service: deployment, scaling, and canary release.
    • API gateway: authentication, quotas, and metering.
    • Evaluation and regression: automatically run benchmark evaluation before a version goes live.
    • Observability: call logs, feedback on effectiveness, and alerts.

    The benefit is that business teams only connect to interfaces; model upgrades and operations are handled uniformly by the platform, avoiding each team having to maintain its own inference cluster.

    5. Industry Application: A RAG Example of How to Land It

    In industry scenarios, enterprises often care not about “how smart the model is,” but whether answers are accurate, traceable, and controllable. Take enterprise knowledge-base Q&A as an example; a typical retrieval-augmented generation (RAG) flow is as follows:

    1. User question
    2. │
    3. ▼
    4. Query rewriting (synonym expansion, sub-question decomposition)
    5. │
    6. ▼
    7. Vector retrieval + keyword retrieval (hybrid recall)
    8. │
    9. ▼
    10. Reranking (fine-ranking the top-k fragments)
    11. │
    12. ▼
    13. Citation-constrained generation ──▶ Answer + source annotations
    14. │ │
    15. │ ▼
    16. └── When knowledge is insufficient, state it clearly ◀── Human spot-check / user feedback loop

    In a RAG prompt, you can constrain the model’s behavior like this:

    1. You are an enterprise knowledge-base Q&A assistant. Please strictly follow these rules:
    2. 1. Answer only based on [Reference Materials]; do not use the model's own memory to supplement facts;
    3. 2. When the reference materials are insufficient to answer, you must reply "Cannot confirm based on the available materials," and must not guess;
    4. 3. After each conclusion, annotate the source with [number], where the number corresponds to the reference material index;
    5. 4. When it comes to amounts, dates, or terms, they must be exactly consistent with the original text.
    6. [Reference Materials]
    7. [1] {doc_1}
    8. [2] {doc_2}
    9. [Question] {question}

    For deployment, it is recommended to proceed in three steps:

    1. Effect evaluation. On your own test set, evaluate three types of metrics simultaneously:

      • Answer accuracy;
      • Citation hit rate (whether conclusions can be traced to the correct source);
      • Ungrounded answer rate, i.e., the proportion of cases in which the model fabricates content when the materials are insufficient.

      Only when all three types of metrics meet the target can the system be considered truly “usable.”

    2. Cost optimization. Long documents can be summarized and compressed first; answers to high-frequency questions can be cached; simple questions can be handled by a small model, with complex ones routed to a large model.
    3. Continuous optimization. Feed user corrections and human spot-check results back into the knowledge base and the evaluation set to form a data loop.

    In data-intensive, terminology-heavy industries such as finance, industrial manufacturing, and energy and power, this flow is especially practical:

    • Finance. Used for policy Q&A, contract review assistance, and research report generation.
    • Industrial manufacturing. Used for equipment manual Q&A, process document retrieval, and automatic work-order classification.
    • Energy and power. Used for procedure lookup, operations-record summarization, and report interpretation.

    6. Evaluation System: Avoiding “Good on the Leaderboard, Failing in Practice”

    When selecting models, enterprises can only treat leaderboard scores as a preliminary reference; truly trustworthy conclusions come from their own evaluation sets. It is recommended to build a three-layer evaluation system:

    1. Public benchmarks. Cover general knowledge, reasoning, code, math, and other dimensions, used for horizontal comparison and quick screening.
    2. Domain evaluation sets. Sampled and annotated by business experts from real scenarios, covering at least high-frequency questions, boundary questions, and adversarial questions.
    3. Online metrics. After launch, continuously observe human adoption rate, user correction rate, average interaction turns, and so on.

    In addition, when building your own evaluation, note the following:

    • Prevent data contamination. If evaluation samples are mixed into the training data, scores will be inflated; deduplication and similarity checks should be performed.
    • Combine model-based and rule-based judging. Automatic metrics suit large-scale regression, but semantic correctness still needs human spot-checks as a backstop.
    • Version traceability. Evaluation sets and evaluation scripts should be under version control to ensure scores from different periods can be compared fairly.

    7. Common Pitfalls and Selection Advice

    In practice, teams often make the following mistakes:

    • Looking only at the leaderboard. Public scores often do not match your own business distribution, so you must verify with your own evaluation set.
    • Blindly doing full-parameter fine-tuning. When the data volume is not large, full-parameter fine-tuning is both expensive and prone to overfitting; parameter-efficient methods based on LoRA, or combining with RAG, are often more cost-effective.
    • Ignoring data quality. Duplicate, low-quality, or outdated data directly drags down answer quality; both training and retrieval need data governance.
    • No baseline. Without a baseline comparison before launch, you cannot tell whether an optimization is truly effective.

    For selection, you can follow this order:

    1. Clarify the task type. Is it mainly understanding and extraction, or generation and writing; do you need multimodal or tool-calling capabilities.
    2. Assess deployment conditions. Build a self-managed cluster or use cloud services; pay attention to compute, memory, network, and operations capabilities.
    3. Do a small-scale validation first. Build an evaluation set with real data, and compare candidate solutions on effect, latency, and cost.
    4. Then consider expansion. Gradually expand capabilities through parameter-efficient fine-tuning, RAG, and agents, avoiding a one-time heavy investment.

    Conclusion

    The core value of an autoregressive blank infilling pretraining framework lies in covering both “understanding” and “generation” with a single training objective, thereby reducing the burden on enterprises of maintaining multiple models. But the framework is only the starting point: data quality sets the ceiling, parallel training and stability determine whether it can run, and serving and evaluation determine whether it can truly land. For developers, understanding mechanisms like span sampling, 2D attention, and loss alignment helps judge whether a model fits their scenario; for enterprises, building an evaluation-driven iteration loop is the key to turning model capabilities into business value.