How to Evaluate Chinese LLMs and Build a Unified Model Access Layer

    As the number of Chinese large language models grows, choosing a model is no longer a matter of finding the highest benchmark score. Engineering teams need a repeatable way to evaluate quality, latency, cost, security, and operability, then make model selection configurable, observable, and reversible. This article explains how to build business-specific evaluation sets, use a unified access layer to abstract model differences, manage routing and credentials, and establish a continuous gray-release and regression process.

    As more Chinese large language models become available, engineering teams face a practical shift: the question is no longer simply “Which models exist?” but “How can we choose among them in a way that is explainable, reversible, and sustainable?”

    Public benchmarks can provide useful leads, but they cannot replace testing with real business workloads. A model’s strong overall score does not mean it will also perform well for long documents, structured output, tool calling, multi-turn conversations, content safety, or high-concurrency workloads.

    A more reliable approach is to define business constraints first, build a reproducible evaluation set, and then use a unified access layer to make model selection configurable, gradually deployable, and observable. Model identifiers should not be hard-coded into business applications.

    1. Define Evaluation Dimensions Before Comparing Model Names

    The first step is to break “Which model should we use?” into a set of measurable questions. At a minimum, evaluate the following dimensions:

    1. Task fit
      Is the application used for summarization, question answering, information extraction, coding assistance, structured output, multi-turn customer service, or tool calling? Different tasks have different requirements for instruction following, format stability, context understanding, and safe refusal behavior. Tasks should be evaluated separately rather than judged by a single measure of “general capability.”

    2. Input and output characteristics
      Consider average and peak context length, output length, streaming requirements, strict formatting requirements, and multi-turn memory. For long-context workloads, also evaluate chunking strategies, citation consistency, and truncation risk.

    3. Quality metrics
      Relevant metrics may include task accuracy, format compliance, factual consistency, citation traceability, safe refusal rate, and human preference scores. Metrics must be tied to business goals rather than relying only on general-purpose benchmarks.

    4. Engineering metrics
      Measure average latency, P95 and P99 latency, throughput, concurrency stability, error-code distribution, rate-limiting behavior, timeout performance, and retry overhead. In production, user experience is often determined by tail latency rather than average latency.

    5. Cost structure
      Evaluate differences between input and output pricing, cache hit rates, retry amplification, routing fallback, and batch-processing opportunities. Cost optimization should not come at the expense of quality for critical tasks.

    6. Security and compliance
      Consider data classification, sensitive-data masking, log retention, access auditing, content safety, geographic restrictions, and deletion mechanisms. When personal information or business secrets are involved, hard constraints should take priority.

    7. Operability
      Evaluate model version management, change notifications, rollback capabilities, monitoring, quota management, and fault isolation.

    These dimensions can be organized into a scoring matrix, but hard constraints should be applied before weighted scoring. Candidates that fail compliance requirements, cannot support the required context length, or have unacceptable error rates should be eliminated instead of being “rescued” by high scores in other categories.

    2. Build a Reproducible Business Evaluation Set

    Public leaderboards usually rely on general-purpose questions and may not represent private enterprise data or the way real users express requests. A better approach is to build a stratified evaluation set from anonymized production requests.

    Samples can be grouped by task type, input length, user intent, difficulty, and risk level. Each sample should include:

    • The input
    • An expected output or scoring rubric
    • Instructions for handling sensitive information
    • A regression-test label

    Evaluation should combine automated metrics with human review. Automated checks can cover format compliance, field completeness, citation matching, refusal behavior, and structured-output parsing success. Human reviewers should focus on readability, factuality, and business usefulness.

    For generative tasks, keep the prompt template and parameters such as temperature fixed, and record the model version. Otherwise, the evaluation results will not be reproducible.

    Before production release, perform at least two validation rounds:

    • Offline regression testing to verify the quality baseline
    • Small-traffic gray release to validate real-world latency, cost, and failure rates

    During the gray release, keep a switch for quickly returning to the previous model. Each request should record the logical model name, physical model version, token usage or quota information, latency, and error type.

    3. Use a Unified Access Layer to Abstract Model Differences

    Multi-model selection should not create fragmented business code. A unified access layer between business applications and model services can provide the following capabilities:

    1. Model service catalog
      Applications should reference logical names such as general-chat, long-document-summary, or structured-extraction. The catalog maps these logical names to physical model identifiers. Replacing a model should require a configuration change rather than a code change.

    2. Unified authentication and token management
      Access tokens should be stored only on the server. Isolate credentials by environment, application, and purpose, and configure least-privilege access, expiration, and quotas. Tokens must not be placed in frontend code, logs, or source repositories.

    3. Routing and fallback
      Route requests according to task type, cost, region, health status, and quota. If the primary model times out or is rate-limited, use a defined fallback policy. Limit the length of the fallback chain to prevent failures from multiplying traffic.

    4. Timeouts, retries, and circuit breaking
      Retry only idempotent requests or requests that can be safely repeated. Use exponential backoff and a maximum attempt count. Trigger circuit breaking and alerts after consecutive failures.

    5. Caching and deduplication
      Short-term caching may be used for identical requests, but it requires caution for personalized or sensitive data. Semantic caching should undergo a separate security assessment.

    6. Logging and observability
      Record request identifiers, logical model names, physical versions, token usage, latency, error codes, and downgrade or fallback reasons. Prompts and outputs in logs should be masked according to security requirements.

    7. Output validation
      Validate structured responses against a schema and apply secondary rule checks to critical business fields. If validation fails, use a repair prompt or fallback path instead of writing the result directly to a database.

    A configuration can be abstracted as follows:

    1. model_catalog:
    2. logical_name: "general-chat"
    3. candidates:
    4. - id: "<provider-a-model-id>"
    5. priority: 1
    6. - id: "<provider-b-model-id>"
    7. priority: 2
    8. routing:
    9. default: "general-chat"
    10. timeout_ms: 30000
    11. retry:
    12. max_attempts: 2
    13. backoff_ms: 500
    14. fallback: true
    15. security:
    16. token_source: "server-side-secret-manager"

    The request layer should also use placeholders rather than hard-coding a physical model:

    1. {
    2. "endpoint": "https://<inference-endpoint>/v1/chat/completions",
    3. "headers": {"Authorization": "Bearer <token>"},
    4. "body": {
    5. "model": "<logical-model-name>",
    6. "messages": [{"role": "user", "content": "<prompt>"}],
    7. "temperature": 0.2,
    8. "max_tokens": 1024,
    9. "stream": true
    10. }
    11. }

    4. A General Process for Accounts, Tokens, and Client Configuration

    Integrating with a model service generally involves four stages:

    1. Account registration
    2. Identity verification
    3. Token creation
    4. Client configuration

    During registration, complete the verification steps required by the service provider. When creating tokens, define their purpose, scope, expiration, and quota, then store them in a server-side secrets-management system. If a token is exposed, revoke and rotate it immediately.

    Client configuration should cover the endpoint, token, logical model name, timeout, retry policy, streaming option, and maximum output length. The model identifier should be managed through the service catalog rather than copied into multiple locations.

    After configuration, send a minimal health-check request first. Then verify error codes, rate-limit responses, and timeout behavior. For production applications, use a server-side proxy to call the model service. The frontend should call only the business API so that credentials are not exposed.

    5. Model Decisions and Continuous Gray Release

    The final decision process should follow this sequence:

    1. Eliminate candidates that violate hard constraints.
    2. Apply weighted scoring to the remaining candidates.
    3. Validate them with small-scale traffic.
    4. Continue regression testing after release.

    Models that pass initial screening can receive traffic by task through the unified access layer. Critical tasks should prioritize quality and stability, while non-critical tasks may prioritize cost and latency.

    A/B testing should define clear success metrics and stopping conditions. Decisions should not rely only on subjective impressions.

    Whenever a model version changes, rerun the regression set. Pay particular attention to format compliance, refusal behavior, latency, and cost. Release gates may include:

    • Evaluation-set pass rate is no lower than the baseline
    • P95 latency remains within the defined budget
    • Error rates are acceptable
    • The rollback switch is available
    • Monitoring and alerts are configured

    Cost optimization can use prompt compression, result caching, task-based routing, and batch processing, but the minimum quality threshold must remain in place.

    6. Security, Compliance, and Implementation Checklist

    Security work should begin with data classification and grading. Sensitive information should be masked before it is sent to a model. Log retention should be minimized, and access audits should remain traceable. Content safety and output validation should cover high-risk scenarios.

    Supplier reviews should address data usage, retention, deletion, and geographic handling requirements.

    Before implementation, verify that:

    • Business objectives are clearly defined.
    • Hard constraints are documented.
    • The evaluation set is anonymized and reproducible.
    • The unified access layer supports routing and fallback.
    • Tokens are managed on the server side.
    • Monitoring and alerts cover latency and error rates.
    • Gray release and rollback procedures have been rehearsed.
    • A cost budget and upper limit are defined.
    • Compliance review has been completed.

    Conclusion

    Supporting multiple Chinese large language models is not simply a matter of choosing one model. It requires an evaluation, replacement, and governance system that can operate continuously.

    Public leaderboards are useful references, but reliable decisions come from business-specific evaluation sets, engineering constraints, and small-traffic validation. By placing model selection behind a unified access layer and incorporating it into continuous regression testing, teams can balance quality, cost, latency, and compliance in an explainable way while keeping applications stable as models evolve.