AI-Assisted Firmware Development: Legacy Code Repair and Debugging Practices
This article presents a practical approach to using AI for repairing and debugging legacy code in firmware and low-level software environments. It explains a two-round workflow: first restoring basic startup behavior, then improving stability and usability. The discussion covers code review, logging, startup failures, pointer lifecycle errors, display initialization, protocol identifiers, error handling, input processing, resource management, and minimal verification scenarios. It also summarizes the strengths and limitations of AI-assisted development and offers engineering recommendations for making such collaboration more reliable.
1. Introduction: From Writing a New Program to Taking Over Legacy Code
In low-level software development, the most complex scenarios are often not writing a small, straightforward program from scratch, but taking over an existing codebase with unclear origins, incomplete structure, and unstable behavior. Compared with ordinary application development, firmware environments and low-level system software are more sensitive to runtime environment, initialization order, resource lifecycle, and external protocol dependencies. Once any part fails, the program may exit directly, show a black screen, or become unresponsive, instead of producing clear exception messages like higher-level applications.
Therefore, practicing whether AI can help repair legacy code is more meaningful than simply observing whether AI can quickly generate a small demonstrable application. It tests several key capabilities:
- Understanding unfamiliar code: Can AI quickly identify module boundaries, entry functions, main loops, and key dependencies?
- Locating problems: When facing vague symptoms such as crashes, black screens, or no input, can AI propose a verifiable troubleshooting path?
- Iterative correction: After receiving runtime logs, error symptoms, or user feedback, can AI continuously generate effective patches?
- Awareness of engineering constraints: Can AI recognize limitations such as limited firmware resources, insufficient debugging methods, and sensitivity to initialization order?
The core goal of this practice is to let AI first restore basic operation in an unfamiliar low-level graphics codebase, then gradually improve stability. The whole process is divided into two rounds: the first round solves “whether it can run,” and the second round solves “whether it is stable and usable.”
2. Overall Approach: Two Rounds of Iteration, Small Steps
To avoid introducing too many modifications at once and making the problem difficult to locate, the practice uses a two-round approach.
Round One: From Not Running to Starting Successfully
The goal of the first round is not to optimize the experience, but to let the program enter the main flow normally. The main work includes:
- Reviewing the code structure and identifying obvious errors;
- Adding necessary runtime logs;
- Locating the cause of startup failure or crashes;
- Fixing key initialization logic;
- Ensuring the program can at least enter the main loop.
Round Two: From Running to Optimizable
The second round focuses on stability and maintainability, including:
- Improving error handling;
- Optimizing input handling logic;
- Fixing display and resource management issues;
- Adding boundary protection;
- Leaving room for future testing and extension.
This phased approach is well suited to AI-assisted development. Low-level problems are often not caused by a single error but by multiple factors stacking together. If developers ask AI to “fix all problems” at once, the results are often difficult to verify. Through small iterations, each modification can have a clear input, clear output, and clear verification method.
3. Round One: Code Review and Startup Issue Diagnosis
1. Perform Static Review First, Then Try to Run
After receiving the legacy code, the first step is not to modify it immediately, but to ask AI to perform an overall review. The instruction can be very direct:
Please review the overall structure of this code and identify issues that may cause startup failure, crashes, display abnormalities, or input abnormalities.
For this type of task, AI usually analyzes from the following dimensions:
- Whether the entry function correctly initializes the runtime environment;
- Whether the main loop has clear execution conditions;
- Whether display-related initialization is completed in order;
- Whether the input module depends on resources that have not yet been initialized;
- Whether there are null pointers, wild pointers, or lifecycle errors;
- Whether error returns are handled correctly;
- Whether resources are acquired but not released.
At this stage, the value of AI is mainly in quickly forming a problem list. It may not always provide all the correct answers at once, but it can help developers build a troubleshooting framework. For someone taking over an unfamiliar project, this “first organize risk points” approach is more efficient than blindly reading code.
2. Introduce Logging to Make the Runtime Process Observable
A common problem in firmware environments or low-level software is that once the program fails, it is difficult to directly observe the cause from the outside. Therefore, before dynamic debugging, AI should first add logging output. Logs should not be too scattered; instead, they should be placed at key points in the main flow, such as:
- Initialization begins;
- Display module initialization completes;
- Mode query completes;
- Mode switch completes;
- Display buffer acquisition completes;
- Main loop entry;
- Input event read completes;
- Drawing completes.
Example code:
void app_init(void){log("display init start");status = query_display_mode(&mode_info);if (is_error(status)) {log("query mode failed");return;}status = set_display_mode(mode);if (is_error(status)) {log("set mode failed");return;}// After switching modes, query display information againstatus = query_display_mode(&mode_info);if (is_error(status)) {log("requery mode failed");return;}frame_buffer = obtain_frame_buffer(&fb_info);if (frame_buffer == NULL) {log("get frame buffer failed");return;}log("display init done");}
This type of logging may look simple, but it can effectively narrow down the problem. If the program exits after a certain log line, developers can infer that the problem most likely occurs in the next operation corresponding to that log point.
3. Crash Issue: Pointer Lifecycle Error
During actual execution, the program started but soon exited. After adding logs, it became clear that the program terminated before entering the main loop. Further observation showed that the problem occurred after switching the display mode.
This type of problem is very common in low-level development: a query operation may return information pointing to internal data, but that data becomes invalid after a subsequent state change. If the program continues to use the pointer, it may access invalid memory.
The handling idea is not simply to add a null check, but to understand the object lifecycle. Mode switching may cause internal state changes, so previously acquired information can no longer be used directly. The correct approach is to reacquire the latest information after a critical state change.
The fix can be summarized as follows:
query_mode();set_mode();// The mode has changed, so it must be queried againquery_mode();get_display_resource();
This case shows that when dealing with low-level problems, AI should not only focus on “where the error occurs,” but also understand “why the object is unavailable at this point.” For developers, the value of this type of problem is that it exposes the code’s neglect of implicit lifecycle assumptions.
4. GUI Does Not Appear: Protocol Identifier and Call Order Issues
After the program stopped crashing, another problem appeared: the system continued running, but the graphical interface did not show up. On the surface, this looked like a rendering logic issue, but deeper investigation suggested that the root cause might be in the identifiers and call order of display-related components.
Low-level graphics programs usually rely on specific protocols or interface objects to complete display output. If identifiers are inconsistent, components are not correctly registered, or call order is wrong, the program may fail to obtain usable display capabilities. In this case, even if the code logic itself has no syntax errors, the picture cannot be displayed properly.
The key fixes include:
- Confirming whether the globally unique identifiers of display-related components are consistent;
- Confirming whether the related components have been correctly installed;
- Confirming whether the call timing is after the initialization of dependencies;
- Confirming whether multiple candidate interfaces exist but an unusable object was used by mistake;
- Confirming whether error returns are ignored.
This type of problem shows that in low-level environments, “whether it can run” depends not only on algorithm logic, but also on whether the runtime environment provides resources as expected. The role of AI here is to help developers build a troubleshooting path, rather than guessing the cause out of thin air.
4. Round Two: From Running to Optimizable
Once the program can start and enter the main loop, the second round focuses on stability and experience optimization. Changes at this stage are more detailed and better reflect the continuous value of AI-assisted development.
1. Improve Error Handling
Many problems in legacy code are not that functionality is completely wrong, but that error handling is missing. For example:
- Resources already acquired are not cleaned up after initialization failure;
- The program continues after a call fails;
- Return values are not checked;
- There is no rollback mechanism for critical state changes.
AI can be asked to refactor critical paths according to “error code classification + resource release + state rollback.” Example logic:
status = init_input();if (is_error(status)) {cleanup_display();return status;}status = init_render();if (is_error(status)) {cleanup_input();cleanup_display();return status;}
Although this modification does not add new functionality, it can significantly improve maintainability. For future maintainers, clear error handling is more important than code that merely “appears to run.”
2. Optimize Input Handling
In small graphical applications, input handling often becomes a source of instability. Common problems include:
- Key states are not debounced;
- Reading input blocks the main loop;
- Key mappings are unclear;
- Focus or input context is not handled;
- Events are triggered repeatedly.
AI can suggest separating input reading from business logic. For example, sample key states first, then handle events uniformly in the main loop. Example code:
input_event = read_input_event();if (input_event == KEY_LEFT) {move_left();} else if (input_event == KEY_RIGHT) {move_right();} else if (input_event == KEY_FIRE) {fire_action();}
This approach may not be the most performant, but it is clear in structure and easy to maintain. For low-level small applications, readability is often more important than excessive optimization.
3. Enhance Display and Resource Management
Display modules commonly encounter the following problems:
- Buffer out-of-bounds access;
- Incorrect calculation of drawing areas;
- Refresh frequency too high;
- Resources not released;
- Old handles continue to be used after state switches.
AI can suggest adding boundary checks, for example, confirming coordinate ranges before drawing:
if (x < 0 || x >= screen_width || y < 0 || y >= screen_height) {return;}
At the same time, for resources such as display buffers, the timing of acquisition, use, and release should be clear. Do not repeatedly acquire the same resource across multiple stages, and do not continue referencing a resource after it becomes invalid.
4. Add Minimal Verifiable Scenarios
To provide a basis for optimization, developers can construct several minimal test scenarios:
- Initialize the display only;
- Draw a static screen only;
- Respond to input only;
- Test boundary movement only;
- Test exit and resource release only.
These scenarios may not be complete, but they are enough to help developers quickly determine which layer the problem occurs in. AI can generate corresponding test instructions based on these scenarios and can also help organize test cases.
5. Observations: Highlights and Boundaries
From this practice, AI has several clear highlights when participating in legacy code repair.
1. It Can Quickly Build a Problem List
When facing unfamiliar code, developers often need to spend a lot of time understanding the structure. AI can first provide module divisions, potential risk points, and troubleshooting order, helping developers get up to speed quickly.
2. It Can Continuously Correct Based on Feedback
Low-level problems usually cannot be solved in one pass. The value of AI lies in its ability to adjust solutions based on feedback such as “a certain step failed” or “the program exits after a certain log line,” rather than only providing isolated code.
3. It Can Lower the Understanding Barrier of Low-Level Development
Firmware development involves knowledge such as initialization order, resource lifecycle, protocol calls, and log-based diagnosis. AI can help developers understand these constraints more quickly and reduce repeated trial and error.
However, its boundaries must also be recognized.
1. Without Runtime Feedback, AI Is Prone to Guesswork
If only static code is provided without runtime results, AI finds it difficult to accurately judge the real fault point. Low-level problems especially depend on logs, symptoms, and environment information.
2. AI Cannot Replace Testing
Code can be generated quickly, but whether it is stable still needs to be verified through actual execution, regression testing, and boundary condition validation.
3. Domain Knowledge Remains Important
For example, resource lifecycle, protocol call order, and initialization dependencies require developers to have a certain amount of low-level experience. AI can assist with analysis, but it cannot completely replace engineering judgment.
6. Engineering Recommendations: Making AI-Assisted Low-Level Development More Reliable
If a team or project wants to promote AI-assisted legacy code repair, it is recommended to establish standards from the following aspects.
1. Build Clear Context
The materials provided to AI should not only include code, but also include:
- Module descriptions;
- Build methods;
- Runtime environment constraints;
- Logging output methods;
- Known error symptoms;
- Code style constraints.
The more sufficient the context, the closer AI-generated results will be to a deployable solution.
2. Put Logging First
Before fixing complex problems, first add logs, assertions, and error codes. Logs are not a temporary measure, but the foundation for long-term maintainability.
3. Make Small Changes and Verify Timely
Each time, solve only one problem and avoid introducing multiple modifications at the same time. After each round of modification, record the reason for the change, the verification method, and the result.
4. Build Regression Cases
Even simple startup checks, screen display checks, and input response checks can prevent new problems from being introduced while fixing old ones.
5. Maintain Human Review
AI-generated code must go through human review, especially focusing on:
- Pointer lifecycle;
- Resource release;
- Error branches;
- Boundary conditions;
- Initialization order;
- Concurrency or interrupt safety.
6. Combine Platform Capabilities to Accumulate Experience
In more mature enterprise environments, common capabilities such as code repositories, log services, monitoring and alerting, container platforms, and object storage can be combined to form a sustainable AI-assisted development loop. For example:
- Use container platforms to support build and test environments;
- Use log services to collect runtime information centrally;
- Use monitoring and alerting to observe abnormal trends;
- Use object storage to archive build artifacts and test reports.
In this way, AI is not only a code generation tool, but an auxiliary capability embedded in the R&D process.
7. Conclusion
The core conclusion of this practice is not that “AI can fix all low-level code in one pass,” but that: under reasonable processes and sufficient feedback, AI can significantly improve the efficiency of legacy code repair. It can help developers quickly understand unfamiliar code, build troubleshooting paths, generate patches, and continuously iterate.
For firmware or low-level graphics programs, success or failure is often determined not by a single algorithm point, but by initialization order, resource lifecycle, protocol calls, error handling, and debugging observability. AI can provide effective assistance in these areas, but only if humans provide clear constraints, real runtime feedback, and necessary engineering judgment.
From “code review” to “crash diagnosis,” then to “protocol identifier troubleshooting” and “stability optimization,” the value of AI-assisted low-level development is reflected in this sustainable iterative loop. In the future, as logging, testing, and R&D processes continue to improve, AI is expected to become an important tool for legacy code governance and low-level software maintenance.
