Real-Time Coding Model Evaluation: Context Compression and Instruction Following

    This article presents a practical evaluation of coding models on long-horizon, real-time front-end engineering tasks, using a music-driven fluid visualization as the test vehicle. Starting from a reference video and a written task specification, it examines multimodal understanding, instruction following after context compression, token efficiency, and failure modes. It shows that coding ability and agentic ability should be assessed separately, and offers concrete engineering practices—context budgeting, structured constraints, staged delivery, thinking budgets, and regression-oriented evaluation—for teams integrating coding models into production workflows.

    1. Introduction: The Center of Gravity in Coding Models Is Shifting from Single-Shot Generation to Long-Horizon Delivery

    A typical long-horizon coding task may start with a short reference video. The model is asked to understand the visual result, propose a technical plan, and finally deliver a runnable web prototype with physical fluid simulation, music-driven behavior, and a parameter panel. No single step is necessarily difficult: generating a fluid animation, connecting an audio spectrum, or writing a few sliders is manageable on its own. The real difficulty is keeping dozens of implicit constraints intact at the same time, while still delivering a usable result after many rounds of modification.

    This matches real software development. Requirements are scattered across design files, legacy code, production logs, and multi-turn discussions. Changes may be requested dozens of times, and acceptance criteria are often hidden in verbal supplements. Many impressive demos encounter three problems once they enter real engineering workflows:

    • Early agreements are forgotten after context is filled. System instructions may sit at the very beginning of tens of thousands of tokens of context, yet their influence fades as the conversation grows.
    • Multi-round edits introduce regressions. Changing one interaction can accidentally break another style rule; adding one feature can quietly invalidate a previously passing self-check item.
    • Token consumption becomes difficult to control. The same reasoning can be repeated and expanded repeatedly, increasing cost several times while producing limited additional value.

    Therefore, evaluating a coding model requires separating its capabilities into two layers:

    • Coding capability: code correctness, algorithm soundness, and engineering standards.
    • Agentic capability: planning, tool use, multi-step execution, and self-correction.

    These two layers do not always improve together. Looking only at code-generation leaderboards can underestimate a model’s practical value in long-horizon tasks. Conversely, a high agentic score does not necessarily mean the delivered code is maintainable. The more reliable approach is to observe the two layers separately and then validate them with real tasks.

    This article uses “music-driven fluid visualization” as the test vehicle for long-horizon coding tasks for three reasons:

    1. Dense constraints: performance, visuals, interaction, and compatibility exist simultaneously, so any weakness becomes immediately visible.
    2. Instant verifiability: opening the page is enough to judge whether the result works; no test environment is required.
    3. General applicability: audio-driven visuals, physical simulation, and parameter panels are common in data visualization, interactive dashboards, and educational demos.

    All tests described in this article were performed through cloud model service APIs. Model outputs were first saved as local files and then manually verified in a browser.

    2. Test Setup: Task Specification, Definition of Done, and Model Overview

    2.1 Task specification: an implicit but complete acceptance checklist

    To make instruction following measurable, the requirements were first written as an explicit task specification, which then served as a checklist:

    Category Concrete requirement
    Input A reference demo video about 30 seconds long, plus a one-sentence requirement description
    Core requirement Physics-driven fluid and smoke motion; smoke moving to the music; silk-like, thread-like trails
    Technical constraint Single HTML file delivery; styles and scripts inlined; no external resource files
    Performance constraint Stable 55 FPS or higher on common desktop configurations
    Compatibility The latest two major versions of desktop browsers; minimum supported resolution of 1366×768
    Interaction constraint Three audio sources: uploaded music, built-in beat, and microphone; mix parameters adjustable in real time; collapsible parameter panel
    Experience constraint Microphone access requires explicit user click; audio context must start inside a user gesture
    Maintainability constraint Simulation, audio, rendering, and UI layers must be decoupled; initialize and dispose interfaces must be provided; disposal must not leak resources

    The specification intentionally included two counter-intuitive requirements:

    • Performance constraints were placed before compatibility constraints. If the model follows the conventional order, it may first choose a high-precision full-resolution implementation and only optimize later.
    • The maintainability constraint requires a dispose interface. This exposes whether the model has lifecycle awareness. Code that only initializes and never disposes will almost inevitably leak resources in long-lived pages.

    2.2 Model under test: overview

    The tested model is positioned for coding scenarios. Its configuration can be summarized along four dimensions:

    • Context: a single request can carry context on the order of hundreds of thousands of tokens, enough to contain the full task specification plus multiple rounds of modification history.
    • Capability form: it supports image and video input, covering common bitmap formats and mainstream video container formats, allowing it to directly “look at” reference material.
    • Reasoning mode: reasoning is enabled by default; when disabled, behavior falls back to that of the previous generation.
    • Metering: input and output are billed separately, with a higher unit price for output. A high-speed mode is also available, trading a higher price for throughput.

    Long context does not mean context should be filled mindlessly. Effective context is also affected by attention distribution, positional encoding extrapolation, and inference framework caching strategies. In practice, a safer approach is “reserve as much as you use”:

    • Leave enough room for the latest instructions and model output.
    • Compress historical information before it enters context.

    2.3 Invocation example

    1. from openai import OpenAI # The API is compatible with the OpenAI protocol used by mainstream model service providers.
    2. client = OpenAI(
    3. base_url="https://your-gateway.example.com/v1", # Replace with the endpoint of the cloud model service you use.
    4. api_key="YOUR_API_KEY",
    5. )
    6. SYSTEM_PROMPT = """
    7. You are a senior front-end engineer. Follow these rules strictly:
    8. 1. First read the task specification, then list implementation points, and finally write the code.
    9. 2. Treat all performance constraints as hard requirements, with higher priority than default implementation habits.
    10. 3. Do not invent APIs, dependencies, or configuration options; if uncertain, explicitly mark them as “to be confirmed”.
    11. 4. Before every delivery, check the task specification item by item and output a checklist.
    12. """
    13. def complete(user_content: str, images: list[str] | None = None) -> str:
    14. """Call the coding model. images is a list of image or video file URLs and may be empty."""
    15. content = [{"type": "text", "text": user_content}]
    16. for url in images or []:
    17. # Visual material is passed as file URLs; see the service provider documentation for exact fields.
    18. content.append({"type": "image_url", "image_url": {"url": url}})
    19. resp = client.chat.completions.create(
    20. model="<your-coding-model>", # Replace with the actual model identifier.
    21. messages=[
    22. {"role": "system", "content": SYSTEM_PROMPT},
    23. {"role": "user", "content": content},
    24. ],
    25. )
    26. return resp.choices[0].message.content

    2.4 Three evaluation dimensions

    The evaluation focused on three questions:

    1. Multimodal understanding: can the model accurately extract visual features and technical constraints from a reference video?
    2. Long-horizon execution: after multiple modification rounds and context compression, can it continue to follow the original specification?
    3. Cost efficiency: how many tokens are required to reach the same level of completeness?

    3. Multimodal Understanding: From Watching a Video to Producing a Plan

    The test skipped the traditional approach of describing requirements step by step. Instead, the reference video and task specification were given to the model together. The model was asked to output a technical plan first and then write code.

    3.1 Plan review: focusing on “physics,” not “filters”

    The model’s plan captured the physical essence of the visual effect rather than stopping at surface styling:

    • Visual layer: the smoke trail is continuous and curls naturally, which is typical of the so-called “silk-like” look. If only a preset noise texture and simple displacement are used, the trail tends to appear as stiff blocks, making this continuous filament effect difficult to achieve. This indicates that the visual quality comes from fluid dynamics, not from a specific filter.
    • Interaction layer: rhythmic behavior comes from low-frequency energy detection. When the beat hits, smoke spreads; melodic sections favor slower flow.
    • Engineering layer: the system is divided into three layers—physical solving, audio analysis, and rendering—with clear interfaces and a performance budget.

    Notably, the model explicitly stated that stably rendering thread-like details depends on numerical dissipation control, not on stacking resolution. This is a classic trade-off in fluid simulation. Increasing resolution by four times usually increases computation several times, while in real-time scenarios the frame budget is fixed. Controlling dissipation can yield clearer structures under the same compute budget. This is a typical example of turning physics knowledge into an engineering decision.

    3.2 Plan executability: identifying and resolving key conflicts

    More importantly, the plan identified several conflict points that could cause the task to fail outright:

    Potential conflict Risk Handling in the plan
    Visual quality vs. frame-rate budget High-precision solving may drop below 30 FPS on common GPUs Run simulation on a downsampled grid, then upscale to full resolution for rendering
    Audio acquisition vs. browser restrictions Microphone permission denied or autoplay blocked Abstract audio sources behind a unified interface; trigger authorization inside user gestures
    Silk-like quality vs. physical realism Low dissipation supports filament details, but too little dissipation lets smoke accumulate until it becomes a gray blur Apply controllable decay separately to the density field and expose it in the parameter panel
    Multi-round iteration vs. regression Style breaks during interaction changes; self-checks fail after new features Introduce staged acceptance and a regression checklist

    The third item deserves special attention. Many implementations choose one of two failures:

    • High dissipation: smoke disappears quickly; trails become short and fragmented; the silk-like feeling disappears.
    • Low dissipation: smoke accumulates; the result eventually becomes a thick gray haze.

    The plan’s approach is to dissipate the velocity field and density field separately: the velocity field keeps low dissipation to preserve vortices, while the density field uses adjustable decay to avoid accumulation. This kind of trade-off is difficult to obtain by simply listing requirements; it requires a real understanding of the simulation mechanism.

    3.3 Understanding gap: rhythm source required manual correction

    In the first implementation, rhythm-driven triggers were too frequent and too densely spaced. Further inspection of the code showed that the model mainly relied on absolute thresholds of spectral energy to judge “beats.” This approach easily mistakes melodic fluctuations for beats in quiet sections and may miss weak beats in heavily mixed sections.

    This differs fundamentally from spectral flux detection, which is commonly used in audio engineering:

    • Spectral flux: compares the change in spectra between adjacent frames rather than absolute energy, making it less sensitive to gradual sections.
    • Absolute energy threshold: triggers whenever energy is high, making it prone to reacting to any sound.

    This is a notable example of “correct but not optimal.” The code runs, and the visual result works, but it still falls short of “dancing with the beat.” The fix was straightforward: in the next iteration instruction, explicitly require “use spectral flux plus an adaptive threshold” and keep the existing interface. The replacement was completed in the next round.

    4. Artifact Testing: Physical Fluid, Audio Driving, and Rendering

    4.1 Fluid solving: classic methods implemented on the GPU

    The implementation follows a classic graphics approach: real-time solving of the incompressible Navier–Stokes equations.

    1. ∂u/∂t + (u · ∇)u = -∇p/ρ + ν∇²u + f (momentum equation)
    2. ∇ · u = 0 (incompressibility condition)

    Here, u is the velocity field, p is pressure, ν is kinematic viscosity, and f is external force, such as perturbations injected by music. A common solving flow can be simplified as follows:

    1. // Pseudocode: single-frame fluid solve loop, executed on the GPU through ping-pong render passes
    2. function step(dt, audio, params) {
    3. // 1. Inject external force: low-frequency energy controls strength; spectral centroid controls swirl direction
    4. const bass = audio.bass; // 0~1, already normalized
    5. const angle = audio.centroid * Math.PI * 2; // Map spectral centroid to a direction
    6. addForce(center.x, center.y, angle, bass * params.forceScale);
    7. // 2. Velocity self-advection: semi-Lagrangian backtracing, unconditionally stable
    8. advect(velocity, velocity, dt, params.velocityDissipation);
    9. // 3. Vorticity confinement: restore vortices smoothed by numerical dissipation to enhance rolling and filament effects
    10. if (params.vorticity > 0) applyVorticityConfinement(params.vorticity);
    11. // 4. Pressure projection: iteratively solve the Poisson equation, subtract the pressure gradient, and enforce ∇·u = 0
    12. for (let i = 0; i < params.pressureIterations; i++) solvePressure();
    13. subtractPressureGradient();
    14. // 5. Density advection: low dissipation preserves filament details; independent decay prevents smoke accumulation
    15. advect(density, velocity, dt, params.densityDissipation);
    16. decay(density, params.densityDecay);
    17. }

    Each step has a clear engineering meaning:

    • Semi-Lagrangian advection: each step backtracks along the velocity direction and samples with interpolation. It is unconditionally stable and allows relatively large time steps, at the cost of introducing numerical dissipation.
    • Vorticity confinement: the stability gained from numerical dissipation smooths small vortices, making the image look blurry. Vorticity confinement reapplies a small force toward vortex centers based on vorticity magnitude, pulling details back. It is one of the key switches for achieving silk-like rolling effects.
    • Pressure projection: iteratively approximate the Poisson equation, subtract the pressure gradient, and make the velocity field satisfy the incompressibility condition. The iteration count is a direct knob for the quality-vs-frame-rate trade-off.
    1. // Pseudocode: connect the audio context and input device to the audio graph
    2. // ctx must be created or resumed inside a user gesture callback (click or keypress); otherwise the browser may suspend it
    3. async function createAudioSource(mode, audioContext) {
    4. let node;
    5. if (mode === "file") {
    6. const buf = await audioContext.decodeAudioData(await file.arrayBuffer());
    7. node = audioContext.createBufferSource();
    8. node.buffer = buf;
    9. node.loop = true; // Loop playback for long-duration demos
    10. } else if (mode === "builtin") {
    11. node = builtinBeatGenerator(audioContext); // Built-in beat synthesizer
    12. } else if (mode === "mic") {
    13. const stream = await navigator.mediaDevices.getUserMedia({ audio: true });
    14. node = audioContext.createMediaStreamSource(stream); // Requires explicit user authorization
    15. }
    16. return node;
    17. }

    4.2 Audio driving: three frequency bands, three kinds of behavior

    The interaction between rhythm and visuals is based on segmented spectral analysis:

    1. // Pseudocode: rhythm detection based on spectral change, with envelope smoothing
    2. class RhythmDriver {
    3. constructor(analyser) {
    4. this.analyser = analyser;
    5. this.spectrum = new Uint8Array(analyser.frequencyBinCount);
    6. this.prev = new Float32Array(analyser.frequencyBinCount);
    7. this.bassThreshold = 0.15; // Bass-band flux threshold
    8. this.midThreshold = 0.10; // Mid-band flux threshold
    9. this.bassAvg = 0; // Adaptive baseline to avoid fixed-threshold over-triggering
    10. }
    11. update(dt) {
    12. this.analyser.getByteFrequencyData(this.spectrum);
    13. const n = this.spectrum.length;
    14. const bassFlux = this.flux(0, Math.floor(n * 0.08)); // Bass band
    15. const midFlux = this.flux(Math.floor(n * 0.08), Math.floor(n * 0.4));
    16. // Spectral flux: only positive differences between current and previous spectra are counted
    17. const onBeat = bassFlux > Math.max(this.bassThreshold, this.bassAvg * 1.6);
    18. this.bassAvg = this.bassAvg * 0.95 + bassFlux * 0.05; // Slow baseline adaptation
    19. // Exponentially decaying envelope: fast decay after triggering to avoid lingering motion
    20. this.bassPulse = onBeat ? 1.0 : this.bassPulse * Math.exp(-dt / 0.12);
    21. this.midPulse = this.midPulse * Math.exp(-dt / 0.25) + midFlux * 0.5;
    22. this.prev.set(this.spectrum); // Store the current spectrum for the next-frame difference
    23. return { bass: this.bassPulse, mid: this.midPulse };
    24. }
    25. flux(from, to) {
    26. let sum = 0;
    27. for (let i = from; i < to; i++) sum += Math.max(0, this.spectrum[i] - this.prev[i]);
    28. return sum / Math.max(1, to - from) / 255;
    29. }
    30. }

    The mapping between frequency bands and visual feedback is as follows:

    Frequency band Typical source Visual mapping Design intent
    Low frequency Kick drum, bass Center pulse injection and overall expansion Emphasize the beat and create a “dancing” feeling
    Mid frequency Vocals, chords, main melody Trail color shift and filament density variation Express melodic direction and enrich layers
    High frequency Hi-hat, sibilants Subtle particle flicker and edge highlights Add airiness and avoid a dull image

    Whether the source is uploaded audio, a built-in beat, or microphone input, all sources must pass through the same detection and mapping logic. This ensures that the “unified interface” constraint holds not only structurally but also behaviorally.

    4.3 Rendering: where the silk-like quality comes from

    The silk-like trail is mainly the result of four combined factors:

    1. Low density dissipation: trails remain continuous over time rather than appearing as discrete patches.
    2. Vorticity confinement: fine vortices are preserved, so smoke curls in thread-like patterns.
    3. Hue drift with energy: slight dispersion is added—RGB channels sample the density field with slightly different offsets—producing a rainbow halo similar to soap films or silk.
    4. Trail buffer: the output buffer is not cleared directly but decays with a coefficient close to 1, making frames connect naturally.

    The common feature of these four points is that none is a “special effect plugin.” They are reasonable combinations of simulation parameters. This suggests that the plan understands visual effects at the mechanism level, not merely at the effect level.

    4.4 Performance and compatibility testing

    On common desktop configurations, the first version reached about 60 FPS. Several details were decisive:

    • Simulation and rendering are decoupled: simulation runs on a downsampled grid, and the result participates in rendering through bilinear upscaling, greatly reducing computation.
    • Iteration count is configurable: pressure projection iteration count is exposed as a parameter and automatically reduced on lower-end devices.
    • Frame-rate adaptation: by continuously monitoring frame time, the system dynamically adjusts simulation resolution levels, avoiding dramatically different experiences across machines.
    • Pixel ratio cap: device pixel ratio is limited on high-resolution screens to prevent unnecessary rendering overhead.

    In terms of compatibility, the deliverable behaved consistently in recent desktop browser versions. Browser policies such as audio source authorization and autoplay restrictions were also handled correctly.

    5. Long-Horizon Execution: Does the Model Still Remember When Context Is Full?

    5.1 Test method

    To make the context as close as possible to a real workload, the test deliberately applied high pressure:

    • The full task specification, reference video, and historical implementations were placed in context.
    • Eight rounds of modification requests were issued in the same session, covering performance tuning, interaction enhancements, compatibility fixes, and code cleanup.
    • Each round implicitly carried the requirement “do not break existing constraints.”
    • Midway through, an explicit context compression was performed, keeping only the specification summary, key decisions, and the latest two rounds of code.

    5.2 Instruction following: early constraints still work in a crowded context

    Several observations are worth recording:

    • Hard constraints are not lost. In round 6, the request was to add “export the current screen as an image.” The model added the feature while preserving single-file delivery, the performance budget, and the dispose interface. It did not sacrifice existing constraints for the new feature.
    • Conflicting instructions are explicitly called out. Midway, the request “double the simulation resolution” was made. The model first explained that this would exceed the frame-rate budget, then proposed a compromise: enable it only in the high-end device tier with automatic fallback. It did not blindly comply, nor did it refuse.
    • Implicit constraints continue. The new export feature still followed the principle of “no browser permission or download triggered outside a user gesture,” showing that constraints had become behavioral norms rather than “requirements from the previous round.”

    Of course, problems also remained:

    • Later modifications are more likely to ignore incidental optimizations. In round 4, code cleanup unintentionally changed parameter naming, causing a self-check item validated in round 2 to fail. This is exactly why regression testing must exist.
    • Vague supplementary requests sometimes lead to over-interpretation. For example, the request “make the UI cooler” caused the model to rewrite the entire parameter panel styling, while only the color scheme needed adjustment.

    5.3 Thinking budget: reducing “ineffective depth”

    A common hidden cost of coding models is overthinking. For a request that changes only three variables, the model may spend a large amount of text discussing all possible approaches before giving an implementation. This “ineffective depth” increases latency and cost.

    A clear optimization direction of the tested model is to suppress this tendency. In testing, responses to simple changes became noticeably more direct, while complex tasks retained necessary reasoning depth. From an engineering perspective, the recommendation is to set budgets for thinking and classify tasks by difficulty:

    1. # Pseudocode: allocate thinking budget by task complexity
    2. THINKING_BUDGET = {
    3. "typo": 512, # Spelling, copy, or minor style tweaks
    4. "feature": 4096, # Adding a complete feature
    5. "refactor": 8192, # Refactoring and structural changes
    6. "debug": 16384, # Investigating difficult defects
    7. }

    5.4 Token cost: comparison under similar workload

    Under the same task and the same number of iteration rounds, an approximate comparison was made against the previous-generation model. The results are as follows. They represent relative magnitude, not a precise benchmark:

    Metric Previous-generation behavior Results in this test
    Completing all 8 rounds of changes Completed, but reasoning was verbose Completed, with more compact reasoning
    Average token consumption per round Baseline About 30% lower
    Output rework rate Occasional constraint omissions Clearly reduced
    Perceptible quality difference — Slightly behind top closed-source models in pure visual fidelity, but competitive in agentic tasks

    It should be emphasized that this comparison is about “behavioral tendencies on similar tasks,” not an authoritative benchmark. Actual numbers vary greatly depending on task description, context length, and call parameters. Teams should rerun tests on their own business corpus.

    6. Capability Boundaries: Where the Model Still Falls Short

    To make conclusions credible, failure cases must be recorded. The following four types of problems appeared repeatedly during testing.

    6.1 Implicit state machines in complex interaction states

    When conditions overlap—switching audio sources, pausing playback, denying microphone authorization, losing page focus—the model tends to patch behavior with many boolean variables. Over time, state combinations explode, leading to hard-to-diagnose issues such as “still responding to beats after pausing.” Recommended approach: require the model to explicitly declare a state machine during the requirements phase, including state enums and a transition table, rather than letting it evolve naturally during implementation.

    6.2 Assumptions about numerical precision

    In pressure projection and gradient computation, the model defaults to 8-bit textures. This is usually acceptable, but under high-contrast, low-dissipation parameters, obvious banding appears. Changing texture precision to floating-point formats eliminated the problem. The lesson is: constraints involving numerical computation must explicitly state precision requirements in the specification rather than relying on model defaults.

    6.3 Optimistic assumptions about browser compatibility

    The model tends to be optimistic about the availability of newer APIs, for example directly assuming that a certain class of audio graph nodes is universally available. In real delivery, explicit feature detection and fallback paths are needed:

    1. // Pseudocode: feature detection and fallback
    2. if (!window.AudioContext) showUnsupportedTip();
    3. if (!navigator.mediaDevices?.getUserMedia) disableMicSource();

    6.4 Tendency toward code-size explosion

    Under a single-file constraint, the model easily piles hundreds of lines of logic into one script. Without explicit module division requirements, readability deteriorates quickly. In testing, adding a constraint to the specification—“divide into four layers, with no more than N lines per layer”—noticeably improved the structure of the output.

    The common pattern behind these failures is not that “the model cannot write,” but that “when information is insufficient, the model chooses the most common path.” The most effective engineering response is to make implicit agreements explicit.

    7. Methodology: Five Key Practices for Long-Context Coding Tasks

    7.1 Context budget: first define what must stay resident

    Long context does not mean unlimited context. A practical approach is to divide it into three layers:

    • Resident layer: task specification, hard constraints, interface contracts.
    • Working layer: current file, relevant historical files, latest diffs.
    • Archive layer: earlier conversations and completed intermediate artifacts.

    The archive layer should not enter context; only a summary remains. Even when context is crowded, key constraints are less likely to be squeezed out of the attention focus.

    7.2 Structured instructions: translating “adjectives” into “numbers”

    Expressions such as “make the effect cool” or “performance must be good” cannot be verified. Translating them into checkable items significantly improves adherence:

    1. Constraint priority (from highest to lowest):
    2. 1. Single-file delivery, with styles and scripts inlined
    3. 2. Stable 55 FPS or higher on desktop
    4. 3. Compatible with the latest two major desktop browser versions
    5. 4. Simulation / audio / rendering / UI layers decoupled
    6. 5. Provide mount() and dispose() interfaces

    Prioritization is key. When multiple constraints conflict—for example, “more detailed smoke” versus “higher frame rate”—the model needs to know which one to sacrifice.

    7.3 Staged validation: splitting long-horizon tasks into acceptable small segments

    Asking for a complete system in one shot makes failure diagnosis difficult. A more stable approach is to split delivery:

    1. First deliver a minimal runnable version with “physics solving + rendering.”
    2. After acceptance, integrate audio.
    3. Then add interaction and the parameter panel.
    4. Finally, close the loop on performance and compatibility.

    Each stage has independent acceptance criteria, greatly reducing regression cost.

    7.4 Thinking budget and mode management

    • Clearly distinguish “simple changes” from “difficult problems”; limit thinking depth for the former and allow it for the latter.
    • Disabling reasoning mode causes capability regression. Therefore, do not arbitrarily turn it off to save tokens; reduce cost through budget control rather than capability switches.
    • High-speed mode is suitable for interactive debugging, while standard mode is sufficient for regular batch tasks.

    7.5 A reusable evaluation matrix

    To turn subjective impressions into comparable metrics, five dimensions can be scored from 1 to 5:

    Dimension Evaluation focus Data source
    Instruction following Whether all hard constraints are met and conflicting instructions are called out Specification checklist
    Long-horizon stability Whether regressions are introduced after multiple modifications Regression checklist
    Visual/functional completeness Perceptible gap from the reference effect Manual review
    Cost efficiency Tokens required to reach equivalent completeness Call logs
    Engineering standards Modularity, interfaces, resource release, exception handling Code review

    8. Common Failure Modes and Avoidance Strategies

    Failure mode Typical symptom Root cause Avoidance strategy
    Context forgetting Later edits break earlier constraints Key constraints not resident; position too far forward Three-layer context plus priority ordering
    Ineffective depth Simple changes consume excessive reasoning Task complexity not classified Thinking budget plus task classification
    Visual-vs-performance choice Frame drops when resolution is increased No hard performance metric in specification Write frame rate as a hard constraint and provide fallback strategy
    Interaction state confusion Still responds after pausing; errors after switching sources Implicit state machine Explicitly declare state enums and transition tables
    Numerical banding Color bands appear at low dissipation Insufficient texture precision Specify precision requirements in the specification
    Compatibility optimism Direct errors in some browsers No feature detection Require fallback paths
    Code expansion Single file of thousands of lines, hard to maintain Lack of module division constraints Specify layering and line-count limits

    9. Selection Advice: Which Scenarios Suit Which Model Types?

    Based on this test, a rough selection framework can be provided:

    • Long context + strong instruction following + cost sensitivity: prefer coding-oriented models that performed stably in this test. Their advantage is not “general-purpose versatility” but making coding solid enough.
    • Extreme visual fidelity or complex reasoning: top closed-source models still have advantages and are suitable as a fallback for difficult cases.
    • Multimodal input understanding: directly feeding videos, screenshots, or design files is more efficient than manually transcribing requirements and significantly reduces requirement ambiguity.
    • Controllable cost: combining thinking budgets, context compression, and staged delivery can usually reduce cost without sacrificing quality.

    Regardless of which model type is chosen, one principle remains unchanged: the model is only the executor; the clarity of the specification determines the upper bound of the output.

    10. Conclusion

    The biggest takeaway from this evaluation is not “how a particular model performed on a particular case,” but a clearer understanding of the real difficulties of long-context coding tasks:

    1. The difficulty lies not in generation, but in maintenance. Writing a piece of fluid code is not difficult; keeping it compliant with all original constraints after dozens of modifications is.
    2. Multimodal input changes the way requirements are communicated. Letting the model directly see reference material is more accurate and faster than describing “silk-like smoke” in words.
    3. Cost comes from ineffective depth, not necessary reasoning. Task classification and thinking budgets are more reasonable cost-reduction paths than simply “turning off reasoning.”
    4. Evaluation must be structured. Replace subjective impressions with checkable specifications, regressionable checklists, and comparable metrics; only then are conclusions reliable.

    For developers, rather than asking “which model is the strongest,” it is better to first ask, “Is my task specification written clearly enough?” When specifications are sufficiently clear and validation is sufficiently automated, differences between models are quickly amplified or neutralized, and model selection is no longer a matter of intuition.